S3AB TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen For surface mounted application /cuspopen Glass passivated junction chip. /cuspopen Low forward voltage drop /cuspopen High current capability /cuspopen Easy pick and place /cuspopen High surge current capability /cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-O /cuspopen High temperature soldering: /cuspopen 260 o C / 10 seconds at terminals Mechanical Data /cuspopen Case: Molded plastic /cuspopen Terminals: Solder plated /cuspopen Polarity: Indicated by cathode band /cuspopen Packaging: 16mm tape per EIA STD RS-481 /cuspopen Weight: 0.093 gram SMB/DO-214AA Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol S3AB S3BB S3DB S3GB S3JB S3KB S3MB Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current @TL =75℃ I(AV) 3.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 100 A Maximum Instantaneous Forward Voltage @ 3.0A VF 1.15 V Maximum DC Reverse Current @ TA =25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 10.0 250 uA uA Typical Thermal Resistance (Note 3) RθJL 10 ℃/W Maximum Reverse Recovery Time ( Note 1 ) Trr 2.5 uS Typical Junction Capacitance ( Note 2 ) Cj 40 pF Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied VR=4.0 Volts
- 499 - RATINGS AND CHARACTERISTIC CURVES (S3AB THRU S3MB) FIG.4- TYPICAL REVERSE CHARACTERISTICS 0 20 40 60 80 100 120 140 0.1 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) Tj=125 C0 Tj=25 C0 FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 505 100 100 200 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method Tj=Tj max FIG.3- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.03 0.1 0.3 100 FORWARD VOLTAGE. (V) PULSE WIDTH-300 S 2% DUTY CYCLE FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 100501051 100 REVERSE VOLTAGE. (V) Tj=25 C f=1.0MHz Vsig=50mVp-p Tj=25 C0 FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 50 60 70 80 100 110 120 130 14090 150 0.5 2.0 3.5 3.0 2.5 1.0 1.5 LEAD TEMPERATURE. ( C) o RESISTIVE OR INDUCTIVE LOAD P. C. BOARD MOUNTED ON 8.0mm PAD AREAS INSTANTANEOUS REVERSE CURRENT .( A ) 0 165