S3B

S3A DAESAN | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

Features

• For surface mounted applications
• Glass passivated junction
• Low profile package
• Built-in strain relief, ideal for automated placement
• Plastic package has Unerwrites Laboratory Flammability Classification 94V-0
• High temperature soldering guaranteed: 250¡É/10 seconds, at terminals Maximum Ratings And Electrical Characteristics
• Case : JEDEC SMC(DO-214AB) molded plastic body
• Terminals : Plated axial lead solderable per MIL-STD-750, method 2026
• Polarity : Color band denotes cathode end
• Mounting Position : Any
• Weight : 0.007 ounce, 0.25 gram (Ratings at 25¡É ambient temperature unless otherwise specified, Single phase, half wave 60Hz, resistive or inductive load. For capacitive load, derate by 20%) CURRENT 3.0 Amperes VOLTAGE 50 to 1000 Volts Notes: (1) Measured at 1MHz and applied reverse voltage of 4.0V dc. (2) Thermal resistance from junction to ambient and from junction to lead mounted on 0.2¡¿0.2"(0.5¡¿0.5mm) copper opad areas. (3) Reverse recovery test conditions:IF=0.5A, IR=1.0A, Irr=0.25A Maximum recurrent peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Volts Peak forward surge current 8.3ms half sine wave superimposed on rated load (JEDEC method) TL=75¡É VDC Maximum average forward rectified current at TL=75¡É (Note 2) Maximum instantaneous forward voltage at 1.0A VRRM Volts Symbols Units 1.15VF VRMS 3.0 Amps Amps 100.0IFSM TJ TSTG 250 -55 to +175 ¡É Volts Maximum reverse current at rated voltage Typical thermal resistance (Note 2) Typical reverse capacitance (Note 3) Operating and storage temperature range S3A 1.0 13.0 Volts ¥ìA ¡É/W ¥ìS I(AV) IR R¥èJL TA=25¡É TA=125¡É 2.5trr 100 S3B 100 200 S3D 140 200 400 S3G 280 400 600 S3J 420 600 800 S3K 560 800 1000 S3M 700 1000 Typical junction capacitance (Note 1) pF60.0CJ 47.0R¥èJA Dimensions in inches and (millimeters) 0.124(3.15) 0.108(2.75) 0.245(6.22) 0.220(5.59) 0.012(0.31) 0.006(0.15) 0.280(7.11) 0.260(6.60) 0.103(2.62) 0.079(2.00) 0.050(1.27) 0.030(0.76) 0.008(0.203) MAX. 0.320(8.13) 0.305(7.75) DO-214AB (SMC)

FIG.1-FORWARD CURRENT DERATING CURVE LEAD TEMPERATURE (¡É) AVERAGE FORWARD CURRENT AMPERES 1007060 140 1501308050 90 110 120 RESISTIVE OR INDUCTIVE LOAD P.C.B.MOUNTED ON COPPER PAD AREAS 0.5 1.0 1.5 3.5 3.0 2.5 2.0 FIG.4-TYPICAL REVERSE CHARACTERISTICS PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS REVERSE CURRENT (mA) 1000 20 806040 0.1 1.0 100 TJ=25¡É TJ=125¡É FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE. VOLTS JUNCTION CAPACITANCE (pF) 100 101 100 TJ=25¡É f=1.0MHz Vsig=50mVp-p INSTANTANEOUS FORWARD VOLTAGE (VOLTS) INSTANTANEOUS FORWARD CURRENT (AMPERES) FIG.2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS TJ=25¡É PULSE WIDTH=300mS 1% DUTY CYCLE 0.01 0.1 100 FIG.3-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 101 100 NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT (AMPERES) 100 200 TL=25¡É 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) FIG.6-TYPICAL TRANSIENT THERMAL IMPEDANCE 100.01 0.1 1001 100 0.1 t,PULSE DURATION,sec TRANSIENT THERMAL IMPEDANCE (¡É/W) RATINGS AND CHARACTERISTIC CURVES S3A THRU S3M