S3A MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
www.element14.com www.farnell.com www.newark.com Page <1> V1.005/11/12 Standard Recovery Power Diode Features:
- For surface mounted application
- Glass passivated junction chip
- Low forward voltage drop
- Easy pick and place
- High surge current capability
- High temperature soldering : 250°C/10 seconds at terminals Mechanical Data: Cases : Moulded plastic Terminals : Solder plated Polarity : Indicated by cathode band Specifications: Diode Type : Standard Recovery Diode Configuration : Single Forward Current If(AV) : 3A Forward Voltage VF Max. : 1.15V Reverse Recovery Time trr Max : 2.5µs Forward Surge Current Ifsm Max : 100A Diode Case Style : DO-214AB No. of Pins : 2 Diode Polarity : Cathode External Depth : 6.22mm External Length / Height : 2.62mm External Width : 7.11mm Operating Temperature : 150°C Termination Type : SMD Maximum Ratings and Electrical Characteristics: Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number S3A S3D S3G S3J Unit Maximum recurrent peak reverse voltage 50 200 400 600 VMaximum RMS voltage 35 140 280 420 Maximum DC blocking voltage 50 200 400 600
www.element14.com www.farnell.com www.newark.com Page <2> V1.005/11/12 Standard Recovery Power Diode Type Number S3A S3D S3G S3J Unit Maximum average forward rectified current at TL = 75°C 3 APeak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) 100 Maximum Instantaneous forward voltage at 3A 1.15 V Maximum DC reverse current at TA = 25°C at rated DC blocking voltage at TA = 125°C 250 µA Maximum reverse recovery time (Note 1) 2.5 µS Typical junction capacitance (Note 2) 60 pF Operating temperature range TJ -55 to +150 °C Storage temperature range TsTG Notes: 1. Reverse recovery test conditions: IF = 0.5A, IR = 1A, IRR = 0.25A 2. Measured at 1MHz and applied VR = 4V Ratings and Characteristic Curves:
www.element14.com www.farnell.com www.newark.com Page <3> V1.005/11/12 Standard Recovery Power Diode
www.element14.com www.farnell.com www.newark.com Page <4> V1.005/11/12 Standard Recovery Power Diode Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. Dimensions: Length Depth Width X Y Z Part Number Table
Description
(V) Iav (A) Ifsm (A) Vf (V) at If = 1A at 25°C Package Part Number Diode, Standard, 3A, 50V, SMD 50 3 100 1.15 DO-214AB (SMC) S3A Diode, Standard, 3A, 200V, SMD 200 S3D Diode, Standard, 3A, 400V, SMD 400 S3G Diode, Standard, 3A, 600V, SMD 600 S3J Dimensions : Millimetres Dimensions : Inches (Millimetres)