S393 AUK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • Single Supply Operation: 2V to 36V.
  • Dual Supply Operation: ±1V to ±18V.
  • Allow Comparison of Voltages Near Ground Potential.
  • Low Current Drain 800uA Typ.
  • Compatible with all Forms of Logic.
  • Low Input Bias Current: 25nA Typ.
  • Low Input Offset Current: ±5nA Typ.
  • Low Offset Voltage: ±1mV Typ.

Applications

  • Transducer amplifier
  • DC gain blocks
  • Conventional operational amplifiers

Ordering Information

Type NO. Marking Package Code S393 S393 SOP-8 O u t l i n e D i m e n s i o n s u n i t : mm A SSeemmiiccoonndduuccttoorr Block Diagram A B

Characteristic Symbol Ratings Unit Supply voltage V CC 36 or ±18 V Differential input voltage V IND 36 V Input voltage V IN -0.3 ~ +36 V Power Dissipation P D 300 mW Operating temperature Topr -40 ~ +85 °C Storage temperature Tstg -65 ~ 150 °C

Electrical Characteristics

(Unless otherwise specified. VCC = 5V and –40 °C ≤ Ta ≤ +85 °C) Characteristic Symbol Test Co ndition Min. Typ. Max. Unit Input Offset Voltage V IOS VO = 1.4V Rs = 0Ω - ±1 ±5 mV Input Offset Current I IOS - - ±5 ±50 nA Input Bias Current I IB - - 25 250 nA Input Common Mode Voltage Range VICR - 0 - VCC –1.5 V Supply Current I CC VCC = 30V, RL = ∞, All Channel - - 2.5 mA Large Signal Voltage Gain AV VCC = 15V RL = 15 KΩ 50 200 - V/mV Output Voltage (‘L’ Level) V SAT VIN+= 0V, VIN-= 1V ISINK≤ 4mA - 150 400 mV Response Time t RES RL = 5.1 KΩ, CL = 15pF - 1.3 - uS Output Sink Current I SINK VO ≤ 1.5V VIN+ = 0V, VIN- = 1V 6 16 - mA Output Leakage Current I Leak VO = 5V VIN+ = 1V, VIN- = 0V - 0.1 - nA

Electrical Characteristic Curves Fig. 1 VCC-ICC Fig. 2 V CC-IIB Fig. 4 PD-Ta Fig. 3 VOL-ISINK Fig. 6 VIN,VOUT-trsp Ω Fig. 5 VIN,VOUT-trsp Ω

These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipm- ents which require high quality and/or reliabi lity, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK.