S2M-13-F

S2A_1 DIODES | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

@TA = 25°C unless otherwise specified Notes: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC. 2. Thermal Resistance Junction to Terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. /c183Glass Passivated Die Construction /c183Low Forward Voltage Drop and High Current Capability /c183Surge Overload Rating to 50A Peak /c183Ideally Suited for Automated Assembly /c183Lead Free Finish/RoHS Compliant (Note 3) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol S2 A/AA B/BA D/DA G/GA J/JA K/KA M/MA Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage V RRM VRWM VR 50 100 200 400 600 800 1000 V RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current @ T T = 100°C I(AV) 1.5 A Non-Repetitive Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load IFSM 50 A Forward Voltage @ I F = 1.5A VFM 1.15 V Peak Reverse Current @T A = 25°C at Rated DC Blocking Voltage @TA = 125°C IRM 5.0 125 µA Typical Total Capacitance (Note 1) CT 20 pF Typical Thermal Resistance, Junction to Terminal (Note 2) R/c113JT 20 °C/W Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C A Suffix Designates SMA Package No Suffix Designates SMB Package Mechanical Data /c183Case: SMA/SMB /c183Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 /c183Moisture Sensitivity: Level 1 per J-STD-020C /c183Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208 /c183Polarity: Cathode Band or Cathode Notch /c183Marking: Type Number, See Page 2 /c183Ordering Information: See Page 2 /c183Approximate Weight: SMA 0.064 grams SMB 0.093 grams Dim SMA SMB Min Max Min Max A 2.29 2.92 3.30 3.94 B 4.00 4.60 4.06 4.57 C 1.27 1.63 1.96 2.21 D 0.15 0.31 0.15 0.31 E 4.80 5.59 5.00 5.59 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.01 2.62 2.00 2.62 All Dimensions in mm A B C D GH E J Maximum Ratings and Electrical Characteristics

XXX = Product type marking code, ex: S2A (SMB package) XXXX = Product type marking code, ex: S2AA (SMA package) = Manufacturers’ code marking YWW = Date code marking Y = Last digit of year ex: 2 for 2002 WW = Week code 01 to 52 YWW XXX(X) DS16004 Rev. 11 - 2 2 of 3 S2A/A - S2M/A www.diodes.com 0.3 0.6 0.9 1.2 1.5 20 40 60 80 100 120 140 160 T , TERMINAL TEMPERATURE (ºC) Fig. 1 Forward Current Derating Curve T I , AVERAGE F ORWARD CURRENT (A) AV Resistive or inductive load 0.01 0.1 1.0 100 1000 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4 Typical Reverse Characteristics T = 125°Cj T=2 5 ° Cj 1 10 100 I , PEAK FORWARD SURGE CURRENT (A)FSM NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Sur ge Current Derating Curve Single Half-Sine-Wave T= 2 5 ° Cj 0.01 0.1 1.0 V , INSTANTANEOUS FORWARD VOLTAGE (V) Fig. 2 Typical Forward Characteristics F I , INSTANTANE OUS F ORWARD CURRENT (A) F * x = Device type, e.g. S2AA-13-F (SMA package); S2A-13-F (SMB package). Device* Packaging Shipping S2xA-13-F S2x-13-F SMA SMB 5000/Tape & Reel 3000/Tape & Reel Ordering Information (Note 4) Marking Information

DS16004 Rev. 11 - 2 3 of 3 S2A/A - S2M/A www.diodes.com IMPORTANT NOTICE LIFE SUPPORT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein;neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such useand will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated.