S2GF UNSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 4
Technical content
Features
For surface mounted applications Low profile package Glass passivated chip junction Easy to pick and place Lead free in comply with EU RoHS 2011/65/EU directives Case: SMAF Quantity Per Reel : 3,000pcs Approx. Weight : 27mg / 0.00095oz Terminals: Solderable per MIL-STD-750, Method 2026 Parameter Symbol S2JF S2KF S2MFS2GF Units VRRM VRMS VDC IF(AV) VF IR IR Cj RθJA RθJC TJ,Tstg V V V A V pF Ta=25℃ Ta=125℃ č1Ď Note: (1) Measured at 1MHz and applied reverse voltage of 4VDC. Maximum Repetitive Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Max Instantaneous Forward Voltage at 2A Typical Junction Capacitance Operating and Storage Temperature Range 2.0 1.1 5.0 100 -55 ~ +150 Peak Forward Surge Current,8.3ms Single Half Sine-wave Superimposed on Rated Load Maximum DC Reverse Current at Rated DC Reverse Voltage č2Ď IFSM A μA Maximum Average Forward Rectified Current at Tc =125℃ Maximum Ratings and Electrical Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Single phase half-wave 60Hz, resistive or inductive load, for capacitive load current derate by 20%. 1ğCathode 2ğAnode SMAF 400 280 400 600 420 600 800 560 800 1000 700 1000 Typical Thermal Resistance ℃/W
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.2/3 S2GF~S2MF Surface Mount General Purpose Silicon Rectifiers Electrical Characteristics Curves Fig. 2 Typical Instaneous Reverse CharacteristicsFig.1 Forward Current Derating Curve Fig. 4 Typical Junction CapacitanceFig.3 Typical Forward Characteristic Fig.5 Maximum Non-Repetitive Peak Forward Surage Current 25 50 75 100 125 150 175 Average Forward Current (A) Case Temperature (°C) 0.5 1.0 1.5 2.0 2.5 Single phase half-wave 60 Hz resistive or inductive load Instaneous Current ( A)Reverse μ 200 400 600 8000 0.01 0.1 1.0 Instaneous Reverse Voltage (V) 100 T =25J °C T =75J °C T =100J °C T =125J °C T =150J °C 0.1 0.6 1.0 1.2 1.6 Instaneous Forward Current (A) Instaneous Forward Voltage (V) 0.4 1.0 1.40.8 1.8 T =25J °C Junction Capacitance ( pF) 1.0 10 1000.1 100 Reverse Voltage (V) T =25J °C 10 100 Peak A)Forward Surage Current ( Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method)
Revision March 1,2022 www.unsemi.com.tw Surface Mount General Purpose Silicon Rectifiers ROHS For technical questions, contact: tech@unsemi.com.tw Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information.3/3 S2GF~S2MF Package Outline & Dimensions A C ∠ALL ROUND V AM e UNIT mm max min mil max min 7.9 4.7 146 130 106 193 173 A C D E HE ∠ 1.6 1.3 e Bottom View HE g Top View 1.2 0.8 g g ∠ALL ROUND E D A E pad pad Marking Type Number S2GF S2JF S2KF S2MF Making S2G S2J S2K S2M
Revision March 1,2022 www.unsemi.com.tw For technical questions, contact: tech@unsemi.com.tw ROHS Specifications are subject to change without notice. Please refer to www.unsemi.com.tw for current information. Disclaimer ROHS UNSEMI RESERVES THE RIGHT TO MAKE CHANGE ON OUR PRODUTS , PRODUCTS SPECIFICATION AND DATA WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. UN SEMICONDUCTOR LIMITED its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “UNSEMI”)does not give any representations or warranties for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. In no event shall UNSEMI be liable for any indirect, incidental, punitive, special or consequential damages (including any and all implied warranties, warranties of fitness for particular purpose, non-infringement and merchantability.) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Statements regarding the suitability of products for certain types of applications are based on UNSEMI knowledge of typical requirements that are often placed on UNSEMI products in generic applications. Such statements are not binding, statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify UNSEMI's terms and conditions of purchase, including but not limited to the warranty expressed therein. Unless otherwise agreed in writing, UNSEMI product is not designed, authorized or warranted to be suitable for use in medical life-saving, or life-sustaining application , nor in applications where failure or malfunction of a UNSEMI product can reasonably be expected to result in personal injury, death or severe property or environmental damage. UNSEMI and its suppliers accept no liability for inclusion or use of UNSEMI products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. All referenced brands, product names, service names and trademarks are the property of their respective owners.