S2A JUXING | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
Ideal for automated placement Glass passivated chip junctions Low forward voltage drop Low leakage current High forward surge capability High temperature soldering 260℃/10 seconds at terminals Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC Major Ratings and Characteristics Mechanical Date Case: JEDEC DO-214AA molded plastic body over glass passivated chip Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D I R 5 μA V F 1.1 V I F(AV) 2.0 A V RRM
50 V to 1000 V
I FSM 50 A Polarity: Laser band denotes cathode end Maximum Ratings & Thermal Characteristics A = 25 °C unless otherwise noted)
Electrical Characteristics
A = 25 °C unless otherwise noted) Note 2: Pulse test:300μs pulse width,1% duty cycle. 1.10 V 50 μAT A =25℃ T A =125℃ I R V F Reverse current V R DC 0.98 Symbol Min Type Max Items Test conditions Instantaneous forward voltage Operating junction and storage temperature range T J , T STG –55 to +150 UNIT I F =2A (2) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load I FSM 50 A Thermal resistance from junction to lead (1) R θJL 25 ℃/ W 600 800 1000 V50 100 200 400 Maximum average forward rectified current I F(AV) 420 560 700 V Maximum DC blocking voltage V DC 600 800 1000 V Maximum RMS voltage V RMS 35 70 140 280 S2J S2K S2M UNIT Maximum repetitive peak reverse voltage V RRM 50 100 200 400 Items Symbol S2A S2B S2D S2G T j max. 150 °C pFTypical junction capacitance 4.0 V ,1MHz C J - 30.0 - http://www.trr-jx.com
A =25 ℃ unless otherwise noted) http://www.trr-jx.com S2A~S2M Surface Mount Standard Rectifiers
Product is intended for use in general electronics applications. Product should be worked less than the ratings; if exceeded, may cause permanent damage.or introduce latent failure mechanisms. The absolute maximum ratings are rated values and must not be exceeded during operation. The following are the general derating methods you design a circuit with a device. I F(AV) We recommend that the worst case current be no greater than 80% . I FSM : This rating specifies the non-repetitive peak current. This is only applied for an abnormal operation, which the general during the lifespan of the device. T J : Derate this rating when using a device in order to ensure high reliability. We recommend that the device be used at a T J of below 125°C. TRR is registered trademark of Rising-sun Technology. Rising-sun Technology reserves the right to make changes to any product in this specification to improve reliability,functional characteristics,or design without notice. Rising-sun Technology does not assure any liability arising out of the applications or any product described in this specification. Rising-sun Technology advises customers to obtain the latest version of the device information before placing orders to verify that the required information is current. http://www.trr-jx.com S2A~S2M Surface Mount Standard Rectifiers