S2A_V01 SAMYANG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
FEATURES
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified S2D S2G S2J S2K S2M SA SD SG SJ SK SM Maximum recurrent peak reverse voltage VRRM 200 400 600 800 1000 V Maximum RMS voltage VRWS 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 200 400 600 800 1000 V Maximum average forword rectified current V @ TL=90OC IF(AV) A Peak forward surge current @ TL = 110°C 8.3ms V single half-sine-wave superimposed on rated V load(JEDEC Method) IFSM A Maximum Instantaneous forward voltage at 2.0A VF V Maximum DC reverse current @TA=25oC at rated DC blockjing voltage @TA=125oC Typical junction capacitance (NOTE 2) CJ pF JA Operating junction and storage temperature range TJTSTG oC Terminals:Solder Plated, solderable per MIL-STD- 1111750, Method 2026 SURFACE MOUNT RECTIFIER DO - 214AA(SMB) Polarity: Color band denotes cathode end Weight: 0.003 ounces, 0.093 gram 2.0 IR 70.0 2. Measured at 1.0MHz and applied reverse voltage of 4.0 Volts oC/WTypical thermal resitance (NOTE 3) 50.0 1.15 5.0 NOTE: 1.Reverse recovery time test conditions:IF=0.5A,IR=1.0A,Irr=0.25A 100 35 70 Plastic package has underwriters laboratory 111 flammability classification 94V-0 SB 100 For surface mounted applications S2B UNITS Glass passivated chip junction S2A --- S2M 111REVERSE VOLTAGE: 50 --- 1000 V CURRENT: 2.0 A Built-in strain relief,ideal for automated placement Case:JEDEC DO-214AA,molded plastic over 1111passivated chip Device marking code High temperature soldering: 111 250oC/10 seconds at terminals Low profile package S2A www.diode.co.kr inch(mm) R 40 SAMYANG ELECTRONICS SAM YANG All d ata sheet.com
0.4 0.01 0.1 100 TJ=25 C O Puise Width=300 S 1%DUTY CYCLE 0 20 40 60 80 100 100 0.01 0.001 0.1 TJ=125 C TJ=75 C TJ=25 C O O O Resistive or inductive Load 60Hz Resistive or Inductive load P.C.B.MOUNTED THICK COPPERPAND AREAS 2.0 60 70 80 90 100 110 120 130 140 150 www.diode.co.kr AVERAGE FORWARD CURRENT,AMPERES PEAK FORWARD SURGE CURRENT,AMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES INSTANTANEOUS REVERSE CURRENT,MICROAMPERES JUNCTION CAPACITANCE pF FIG.5-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,VOLTS LEAD TEMPERATURE NUMBER OF CYCLES AT 60Hz INSTANTANEOUS FORWARD VOLTAGE,VOLTS RATINGS AND CHARACTERISTIC CURVES S2A---S2M FIG.3 -- TYPICAL FORWARD CHARACTERISTICS FIG.4 -- TYPICAL REVERSE CHARACTERISTICS FIG.1 -- FORWARD DERATING CURVE FIG.2 PEAK FORWARD SURGE CURRENT PERCENT OF RATED PEAK REVERSE VOLTAGE, .4 1.0 2 100 4 10 20 40 100 f=1MHz TJ=25 1.0 TJ=125℃ 8.3ms Single Half Sine-Wave 24 1081 0040 60 80 All d ata sheet.com