S25XXXH STMICROELECTRONICS | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

S25xxxH January 1995 SCR Symbol Parameter Value Unit IT(RMS) RMS on-state current (180° conduction angle) Tc= 85°C2 5 A IT(AV) Average on-state current (180° conduction angle) Tc= 85°C1 6 A ITSM Non repetitive surge peak on-state current (Tjinitial = 25°C) tp = 8.3 ms 270 A tp = 10 ms 250 I2t I2t Value for fusing tp = 10 ms 310 A 2s dI/dt Critical rate of rise of on-state current IG = 100 mA di G /dt = 1 A/µs.

100 A/ µs

Storage and operating junction temperature range - 40, + 150 - 40, + 125 Tl Maximum lead temperature for soldering during 10s at 4.5mm from case 260 °C ABSOLUTE RATINGS (limiting values) TO220 non-insulated (Plastic) IT(RMS) =2 5 A VDRM = 200V to 800V High surge current capability

FEATURES

Repetitive peak off-state voltage Tj= 125°C 200 400 600 800 V The S25xxxH series of SCRs uses a high performance MESA GLASS PNPN technology. These parts are intended for general purpose applications.

DESCRIPTION

K GA

PG (AV)=1W P GM =1 0W( t p=2 0µs) I GM =4 A( t p=2 0µs) GATE CHARACTERISTICS (maximum values) Symbol Parameter Value Unit Rth(j-a) Junction to ambient 60 °C/W Rth(j-c) Junction to case for DC 1.6 °C/W THERMAL RESISTANCES Symbol Test Conditions Sensitivity Unit 14 16 IGT VD =12V (DC) R L=33Ω Tj= 25°C MIN 30 20 mA MAX 75 50 VGT VD =12V (DC) R L=33Ω Tj= 25°C MAX 1.5 V VGD VD =VDRM R L=3.3kΩ Tj= 125°C MIN 0.2 V tgt V D =VDRM ITM =3xI T(AV) dIG /dt = 1.5A/µsI G = 200mA Tj= 25°C TYP 2 µs IH IT= 500mA Gate open Tj= 25 °C MAX 115 100 mA IL IG =1.2 IGT Tj= 25°C MAX 230 200 mA VTM ITM = 50A tp= 380µs Tj= 25 °C MAX 1.6 V IDRM IRRM VD =V DRM VR =V RRM Tj= 25°C MAX 10 µA Tj= 110°C MAX 2.5 mA dV/dt V D =67%V DRM Gate open Tj= 110 °C MIN 750 500 V/ µs tq ITM =3xI T(AV)V R =35V dI/dt=25A/µs tp=100µs dV/dt=25V/µs VD = 67%VDRM Tj= 110°C MAX 100 µs

ELECTRICAL CHARACTERISTICS

ORDERING INFORMATION

PACKAGE : H = TO220 Non-insulated VOLTAGESENSITIVITY S25xxxH

02468 1 0 1 2 1 4 1 6 1 8 2 00 P (W) 360 O =1 8 0 o =1 2 0o =9 0 o =6 0 o =3 0 o DC I (A)T(AV) Fig.1 :Maximum average power dissipation ver- sus average on-state current. I (A)T(AV) 0 1 02 03 04 05 06 07 08 09 0 1 0 0 1 1 0 1 2 0 1 3 00 DC = 180o Tcase ( C) o Fig.3 :Average on-state current versus case tem- perature. 2.6 2.4 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 Igt Tj( C)o Ih -40 -20 0 20 40 60 80 100 120 140 Igt[Tj] Igt[Tj=25 C]o Ih[Tj] Ih[Tj=25 C] o Fig.5 :Relative variation of gate trigger current and holding current versus junction temperature. 0 20 40 60 80 100 120 1400 25 -70 -80 -90 -100 -110 -120 P (W) Tcase ( C) o = 180 o Tamb ( C)o Rth = 0 C/W 1C / W 2C / W 4C / W o o o o Fig.2 :Correlation between maximum average power dissipation and maximum allowable tem- perature (Tamb and Tcase) for different thermal resistances heatsink + contact. 1E-3 1E-2 1E-1 1E+0 1E+1 1E+2 5E+2 0.01 0.1 Zth/Rth Zth(j-c) Zth(j-a) tp(s) Fig.4 :Relative variation of thermal impedance versus pulse duration. 1 10 100 10000 100 150 200 250 300 Tj initial = 25 Co Number of cycles I (A)TSM Fig.6 :Non repetitive surge peak on-state current versus number of cycles. S25xxxH

I (A). I 2 t( A2s)TSM Tj initial = 25 Co ITSM tp(ms) I2 t Fig.7 :Non repetitive surge peak on-state current for a sinusoidal pulse with width : tp≤ 10ms, and corresponding value of I2t. 0 0.5 1 1.5 2 2.5 3 3.5 41 100 1000 I (A)TM Tj initial 25 Co Tj max V (V)TM Tj max Vto =0.95V Rt =0.012 Fig.8 :On-statecharacteristics (maximum values). S25xxxH

Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectronics.  1995 SGS-THOMSON Microelectronics - All rights reserved. SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. PACKAGE MECHANICAL DATA TO220 Non-insulated (Plastic) D G I H J B A L N1 M N O P C F REF. DIMENSIONS Millimeters Inches A 10.3 0.406 B 6.3 6.5 0.248 0.256 C 9.1 0.358 D 12.7 0.500 F 4.2 0.165 G 3.0 0.118 H 4.5 4.7 0.177 0.185 I 3.53 3.66 0.139 0.144 J 1.2 1.3 0.047 0.051 L 0.9 0.035 M 2.7 0.106 N 5.3 0.209 N1 2.54 0.100 O 1.2 1.4 0.047 0.055 P 1.15 0.045 Marking : type number Weight : 1.8 g S25xxxH