S2055WTP

S2055WTP LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 9

Technical content

295©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx55x Series

55 Amp Standard SCRs

55 A SCRs

IT(RMS) 55 A VDRM/VRRM 400 to 1000 V IGT 40 mA Absolute Maximum Ratings Symbol Parameter Test Conditions Value Unit IT(RMS) RMS on-state current T C = 90°C 55 A IT(AV) Average on-state current T C = 90°C 35.0 A ITSM Peak non-repetitive surge current single half cycle; f = 50Hz; TJ (initial) = 25°C 550 A single half cycle; f = 60Hz; TJ (initial) = 25°C 650 I2tI 2t Value for fusing t p = 8.3 ms 1750 A 2s di/dt Critical rate of rise of on-state current f = 60Hz ; TJ = 125°C 175 A/μs IGM Peak gate current TJ = 125°C PW = 10μS 4.0 A PG(AV) Average gate power dissipation TJ = 125°C 0.8 W Tstg Storage temperature range -40 to 150 °C TJ Operating junction temperature range -40 to 125 °C

Description

Excellent unidirectional switches for phase control applications such as heating and motor speed controls. Standard phase control SCRs are triggered with few milliamperes of current at less than 1 .5V potential. Features & Benefits t3P)4DPNQMJBOU t(MBTToQBTTJWBUFE junctions t7PMUBHFDBQBCJMJUZVQ to 1000 V t4VSHFDBQBCJMJUZVQUP 650 A Schematic Symbol

Applications

Typical applications are AC solid-state switches, industrial power tools, exercise equipment, white goods and commercial appliances. A K G

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Electrical Characteristics (TJ = 25°C, unless otherwise specified) Symbol Test Conditions Value Unit IGT VD = 12V; RL = 30 8 MAX. 40 mA MIN. 5 VGT MAX. 1 .5 V dv/dt VD = VDRM; gate open; TJ = 100°C 400V MIN. 650 V/μs 600V 600 800V 500 1000V 250 VD = VDRM; gate open; TJ = 125°C 400V 550 600V 500 800V 475 V GD VD = VDRM; RL = 3.3 k8; TJ = 125°C MIN. 0.2 V IH IT = 400mA (initial) MAX. 60 mA tq (1) MAX. 35 μs tgt IG = 2 x IGT; PW = 15μs; IT = 110A TYP . 2.5 μs Note : (1) IT=2A; tp=50μs; dv/dt=5V/μs; di/dt=-30A/μs Thermal Resistances Symbol Parameter Value Unit RR(J-C) Junction to case (AC) Sxx55R Sxx55N 0.5 °C/WSxx55W Sxx55M 0.53 RR(J-A) Junction to ambient Sxx55R 40 °C/W Note: xx = voltage Static Characteristics Symbol Test Conditions Value Unit VTM IT = 110A; tp = 380μs MAX. 1 .8 V IDRM / IRRM VDRM / VRRM TJ = 25°C 400 – 600V MAX. μA

800 V 20

1000 V 30

TJ = 100°C 400 – 600V 1000 800V 1500 1000V 5000 TJ = 125°C 400 – 600V 2000 800V 3000

297©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx55x Series Figure 1: Normalized DC Gate T rigger Current vs. Junction T emperature Figure 2: Normalized DC Gate T rigger Voltage vs. Junction T emperature 12 5 0.0 0. 5 1.0 1. 5 2.0 -40 -1 5 10 3 5 60 8 5 110 Junction T emperature (TJ) -- (°C) Ratio of IGT/ IGT (TJ = 25°C) Figure 5: Power Dissipation (T ypical) vs. RMS On-State Current Figure 6: Maximum Allowable Case T emperature vs. RMS On-State Current Figure 3: Normalized DC Holding Current vs. Junction T emperature Figure 4: On-State Current vs. On-State Voltage (T ypical) 125 0.0 0.5 1.0 1.5 2.0 -40 -1 5 10 3 5 60 8 5 110 Junction T emperature (TJ) -- (°C) Ratio of VGT/ VGT (TJ = 25°C) 12 5 0.0 0. 5 1.0 1. 5 2.0 -40 -1 5 10 3 5 60 8 5 110 Ratio of IH/ IH (TJ= 25°C) Junction T emperature (TJ) -- (°C) TJ = 25°C 100 120 Instantaneous On-state Voltage (vT) – Volts Instantaneous On-state Current (iT) – Amps 0 5 10 1 5 20 2 5 30 3 5 40 4 55 0 55 RMS On-State Current [IT(RMS)] - (Amps) Average On-State Power Dissipation [PD(AV)] - (Watts) 100 10 5 110 11 5 120 12 5 130 0 5 10 1 5 20 2 5 30 3 5 40 4 55 0 55 60 Maximum Allowable Case T emperature (TC) - °C RMS On-State Current [IT(RMS)] - Amps CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° The "R" or "M" package rating is intended for high surge condition use only and not recommended for >50A rms continuous current use since narrow pin leads depend- ing on lead length can exceed PCB solder melting temperature. "W" package is recommended for >50A rms continuous current requirements. Note: xx = voltage

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Figure 7: Maximum Allowable Case T emperature vs. Average On-State Current Figure 8: Maximum Allowable Ambient T emperature vs. RMS On-State Current Figure 9: Maximum Allowable Ambient T emperature vs. Average On-State Current 100 105 110 115 120 125 130 0 5 10 1 5 20 2 5 30 3 5 40 Average On-State Current [IT(AVE)] - Amps Maximum Allowable Case T emperature (TC) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° The "R" or "M" package rating is intended for high surge condition use only and not recommended for >32A (AV) continuous current use since narrow pin leads depending on lead length can exceed PCB solder melting temperature. "W" package is recommended for >32A (AV) continuous current requirements. 100 120 RMS On-State Current [IT(RMS)] - Amps Maximum Allowable Ambient T emperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING 100 120 0.0 0. 5 1.0 1. 5 Average On-State Current [IT(AVE)] - Amps Maximum Allowable Ambient T emperature (TA) - °C CURRENT WAVEFORM: Sinusoidal LOAD: Resistive or Inductive CONDUCTION ANGLE: 180° FREE AIR RATING Figure 10: Peak Capacitor Discharge Current Figure 11: Peak Capacitor Discharge Current Derating 100 1000 10000 0.5 1.0 10.0 50.0 Peak Discharge Current (ITM) - Amps Pulse Current Duration (tw) - ms ITRM tW 0.0 0.2 0.4 0.6 0.8 1.0 1.2 02 55 07 5 100 12 5 150 Normalized Peak Current Case T emperature (TC) - °C Note: xx = voltage

299©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx55x Series Surge Current Duration -- Full Cycles Peak Surge (Non-repetitive) On-state Current (ITSM) – Amps Figure 12: Surge Peak On-State Current vs. Number of Cycles SUPPLY FREQUENCY: 60 Hz Sinusoidal LOAD: Resistive RMS On-State Current: [I T(RMS)]: Maximum Rated Value at Specified Case Temperature Notes: 1. Gate control may be lost during and immediately following surge current interval. 2. Overload may not be repeated until junction temperature has returned to steady-state rated value. Soldering Parameters Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus Temp) (TL) to peak 5°C/second max TS(max) to TL - Ramp-up Rate 5°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 5°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 280°C Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Physical Specifications Environmental Specifications Test Specifications and Conditions AC Blocking MIL-STD-750, M-1040, Cond A Applied Peak AC voltage @ 125°C for 1008 hours T emperature Cycling MIL-STD-750, M-1051, 100 cycles; -40°C to +150°C; 15-min dwell-time T emperature/ Humidity EIA / JEDEC, JESD22-A101 1008 hours; 320V - DC: 85°C; 85% rel humidity High T emp Storage MIL-STD-750, M-1031, 1008 hours; 150°C Low-T emp Storage 1008 hours; -40°C Thermal Shock MIL-STD-750, M-1056 10 cycles; 0°C to 100°C; 5-min dwelltime at each temperature; 10 sec (max) transfer time between temperature Autoclave EIA / JEDEC, JESD22-A102 168 hours (121°C at 2 ATMs) and 100% R/H Resistance to Solder Heat MIL-STD-750 Method 2031 Solderability ANSI/J-STD-002, category 3, Test A Lead Bend MIL-STD-750, M-2036 Cond E T erminal Finish 100% Matte Tin-plated Body Material UL recognized epoxy meeting flammability classification 94V-0 Lead Material Copper Alloy Design Considerations Careful selection of the correct device for the application’s operating parameters and environment will go a long way toward extending the operating life of the Thyristor. Good design practice should limit the maximum continuous current through the main terminals to 75% of the device rating. Other ways to ensure long life for a power discrete semiconductor are proper heat sinking and selection of voltage ratings for worst case conditions. Overheating, overvoltage (including dv/dt), and surge currents are the main killers of semiconductors. Correct mounting, soldering, and forming of the leads also help protect against component damage. Dimensions — TO-220AB (R-Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.380 0.420 9.65 10.67 B 0.105 0.115 2.67 2.92 C 0.230 0.250 5.84 6.35 D 0.590 0.620 14.99 15.75 E 0.142 0.147 3.61 3.73 F 0.110 0.130 2.79 3.30 G 0.540 0.575 13.72 14.61 H 0.025 0.035 0.64 0.89 J 0.195 0.205 4.95 5.21 K 0.095 0.105 2.41 2.67 L 0.060 0.075 1 .52 1 .91 M 0.085 0.095 2.16 2.41 N 0.018 0.024 0.46 0.61 O 0.178 0.188 4.52 4.78 P 0.045 0.060 1 .14 1 .52 R 0.038 0.048 0.97 1 .22 K J A H G B F E C D L R TC MEASURING POINT ANODE O P N M .276 7. 0 1 .526 13.36 .320 8.13 AREA (REF .) 0.17 IN2 NOTCH IN GATE LEAD TO ID. NON-ISOLATED TAB GATECATHODE ANODE Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm).

301©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx55x Series Dimensions – TO-263AA (N-package) — D2-Pak Surface Mount Dimension Inches Millimeters Min Max Min Max A 0.360 0.370 9.14 9.40 B 0.380 0.420 9.65 10.67 C 0.178 0.188 4.52 4.78 D 0.025 0.035 0.63 0.89 E 0.048 0.055 1 .22 1 .40 F 0.060 0.075 1 .52 1 .91 G 0.095 0.105 2.41 2.67 H 0.083 0.093 2.11 2.36 J 0.018 0.024 0.46 0.61 K 0.090 0.110 2.29 2.79 S 0.590 0.625 14.99 15.87 V 0.035 0.045 0.89 1 .14 U 0.002 0.010 0.05 0.25 W 0.040 0.070 1 .02 1 .78 G B A W D F V S CATHODE ANODE TC MEASURING POINT C E K H J U .320 8.13 .276 7. 01 .331 8.41 GATE .460 11 .68 .665 16.89 .260 6.60 .150 3.81 .080 2.03 .085 2.16 .055 1 .40 .350 8.89 .276 7. 01 .276 7. 01 AREA: 0.11 in 2 Dimensions – TO-218X (W Package) — Non-Isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.810 0.835 20.57 21 .21 B 0.610 0.630 15.49 16.00 C 0.178 0.188 4.52 4.78 D 0.055 0.070 1 .40 1 .78 E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.7 4 H 0.075 0.095 1 .91 2.41 J 0.575 0.625 14.61 15.88 K 0.256 0.264 6.50 6.71 L 0.220 0.228 5.58 5.79 M 0.080 0.088 2.03 2.24 N 0.169 0.177 4.29 4.49 P 0.034 0.042 0.86 1 .07 R 0.113 0.121 2.87 3.07 S 0.086 0.096 2.18 2.44 T 0.156 0.166 3.96 4.22 U 0.164 0.165 4.10 4.20 V 0.603 0.618 15.31 15.70 W 0.000 0.005 0.00 0.13 X 0.003 0.012 0.07 0.30 Y 0.028 0.032 0.71 0.81 Z 0.085 0.095 2.17 2.42 G R Y H D C K B A E F N T M P J L S V U (diameter) W X CATHODE ANODE ANODE Tc Measurement Point GATE Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). Z

Revised: May 10, 2010 09:33 PM ©2010 Littelfuse, Inc T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Dimensions – TO-218AC (M Package) — Non-isolated Mounting T ab Common with Center Lead Dimension Inches Millimeters Min Max Min Max A 0.810 0.835 20.57 21 .21 B 0.610 0.630 15.49 16.00 C 0.178 0.188 4.52 4.78 D 0.055 0.070 1 .40 1 .78 E 0.487 0.497 12.37 12.62 F 0.635 0.655 16.13 16.64 G 0.022 0.029 0.56 0.7 4 H 0.075 0.095 1 .91 2.41 J 0.575 0.625 14.61 15.88 K 0.211 0.219 5.36 5.56 L 0.422 0.437 10.72 11 .10 M 0.058 0.068 1 .47 1 .73 N 0.045 0.055 1 .14 1 .40 P 0.095 0.115 2.41 2.92 Q 0.008 0.016 0.20 0.41 R 0.008 0.016 0.20 0.41 U 0.164 0.165 4.10 4.20 W 0.085 0.095 2.17 2.42 C D H G F B A E Tc Measurement Point U (diameter) ANODE P GATE J ANODE CATHODE M N K L R Q Note: Maximum torque to be applied to mounting tab is 8 in-lbs. (0.904 Nm). W Product Selector Part Number Voltage Gate Sensitivity Type Package 400V 600V 800V 1000V Sxx55R XXXX 40mA Standard SCR TO-220R Sxx55N XXXX 40mA Standard SCR TO-263 Sxx55W X X X 40mA Standard SCR TO-218X Sxx55M XXXX 40mA Standard SCR TO-218AC Note: xx = Voltage Packing Options Part Number Marking Weight Packing Mode Base Quantity Sxx55R Sxx55R 2.2g Bulk 500 Sxx55RTP Sxx55R 2.2g Tube 500 (50 per tube) Sxx55NTP Sxx55N 1 .6g Tube 500 (50 per tube) Sxx55NRP Sxx55N 1 .6g Embossed Carrier 500 Sxx55WTP Sxx55W 5.23g Tube 250 (25 per tube) Sxx55MTP Sxx55M 4.40g Tube 250 (25 per tube) Note: xx = Voltage

303©2010 Littelfuse, Inc Revised: May 10, 2010 09:33 PM T eccor® brand Thyristors Specifications are subject to change without notice. Please refer to http://www.littelfuse.com for current information. Sxx55x Series TO-263 Embossed Carrier Reel Pack (RP) Specification Gate Cathode Anode 0.512 (13.0) Arbor Hole Dia. 0.945 (24.0) 0.63 (16.0) 1.01 (25.7) 12.99 (330.0) 0.827 (21.0) 0.157 (4.0) Direction of Feed Dimensions are in inches (and millimeters). * Cover tape 0.059 DIA(1.5) Meets all EIA-481-2 Standards Part Numbering System Part Marking System DEVICE TYPE S: SCR xx: Lead Form Option PACKAGE TYPE R: TO-220 (Non-isolated) M: TO-218AC (Non-isolated) W: TO-218X (Non-isolated) N: TO-263 (D CURRENT RATING Lead Form Dimensions 55: 55A VOLTAGE RATING 40: 400V 60: 600V 80: 800V K0: 1000V SENSITIVITY & TYPE S6 0 55 R [blank]: 40mA 2 - Pak) TO-218AC - (M Package) TO-218X - (W Package) TO-220 AB (R Package) TO-263 (N Package) yxxxx S6055R yxxxx S6055M