S200-1-W1-22-9 MACOM | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
300 Constitution
Menlo Park, CA 94025, U.S.A. TITLE: SOLDERSLEEVE SHIELD TERMINATOR WITH LEADS, IMMERSION RESISTANT, 200 DEG C, ROHS COMPLIANT Unless otherwise specified dimensions are in millimeters. [Inches dimensions are shown in brackets] Raychem Devices DOCUMENT NO.: S200-X-W1-22-9 TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A ROUGHNESS IN MICRON Tyco Electronics reserves the right to amend this drawing at any time. Users should evaluate the suitability of the product for their application. REV: C DATE: June 2, 2009 REVISED BY: YUNGUYEN CAGE CODE: 06090 ECO NUMBER: ECO-09-013095 SCALE: NTS SIZE: A SHEET: 1 of 1 Print Date: 2-Jun-09 © 2005-2009 Tyco Electronics Corporation. All rights reserved. If this document is printed it becomes uncontrolled. Check for the latest revision. 1 3 32 4 MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified fluoropolymer. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn96 per ANSI / J-STD-006. FLUX: TYPE ROM1 per ANSI / J-STD-004. THERMAL INDICATOR: Fusible ring. 3. MELTABLE RINGS: Environment resistant modified thermoplastic fluoroelastomer. Color: light blue. 4. PRE-INSTALLED LEAD: Stranded silver-plated copper in accordance with SAE-AS22759/91-22-9. Color: white. APPLICATION 1. These parts are designed to provide an environment resistant shield termination on cables, rated for 150°C minimum, meeting the dimensional criteria listed, having silver or nickel-plated shields and insulations compatible with the insert material. 2. Install using Tyco Electronics approved convection or infrared heating tools in accordance with Tyco Electronics process standard RCPS-100-71. When installed with approved convection or infrared heating tools, assemblies will meet the performance requirements of SAE AS83519. Infrared tools are not recommended for use with black cable jackets. 3. Parts shall be marked with identification code per table. 4. Temperature range: -65°C to +200°C. For best results, prepare the cable as shown: “G” is the minimum diameter on which the sleeve will seal. Product Dimensions Cable Dimensions Product Name Ident. Code L±1.75 (L±0.075) øB min øC min øD max øE max øF min øG min S200-1-W1-22-9 S2001R 16.50 (0.650) 1.90 (0.075) 2.67 (0.105) 1.90 (0.075) 2.67 (0.105) 0.90 (0.035) 0.50 (0.020) S200-2-W1-22-9 S2002R 16.50 (0.650) 2.67 (0.105) 3.68 (0.145) 2.67 (0.105) 3.68 (0.145) 1.40 (0.055) 0.75 (0.030) S200-3-W1-22-9 S2003R 16.50 (0.650) 4.32 (0.170) 5.08 (0.200) 4.32 (0.170) 5.08 (0.200) 2.15 (0.085) 1.25 (0.050) S200-4-W1-22-9 S2004R 19.10 (0.750) 5.97 (0.235) 6.48 (0.255) 5.97 (0.235) 6.48 (0.255) 3.30 (0.130) 1.80 (0.070) S200-5-W1-22-9 S2005R 19.10 (0.750) 6.98 (0.275) 7.62 (0.300) 6.98 (0.275) 7.62 (0.300) 4.30 (0.170) 2.50 (0.100)