S1ZB60 AITSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
AiT Semiconductor Inc. www.ait-ic.com S1ZB60 BRIDGE RECTIFIER REVERSE VOL TAGE 600V FORWARD CURRET 50A REV1.0 - JAN 2015 RELEASED - - 1 - DESCRIPTION FEATURES The S1ZB60 is available in TO-269AA package. Plastic package has Underwriters Laboratory Flammability Classification 94V-0 This series is UL recognized under Component Index, file number E54214 Glass passivated chip junctions High surge overload rating: 35A peak Saves space on printed circuit boards High temperature soldering guaranteed: 260°C/10 seconds at 5 lbs. (2.3kg) tension Available in TO-269AA package
ORDERING INFORMATION
Note SPQ: 3,000pcs/Reel AiT provides all RoHS Compliant Products MECHANICAL DATA Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Polarity: Polarity symbols marked on body Mounting Position: Any Weight: 0.0078 ounce, 0.22 gram
AiT Semiconductor Inc. www.ait-ic.com S1ZB60 BRIDGE RECTIFIER REVERSE VOL TAGE 600V FORWARD CURRET 50A REV1.0 - JAN 2015 RELEASED - - 2 - MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Parameter Symbol Symbol Value Unit Maximum Repetitive Peak Reverse Voltage VRRM 600 V Maximum RMS Voltage VRMS 420 V Maximum DC blocking voltage VDC 600 V Maximum Average Forward Rectified Current At TA=30℃ On Glass-Epoxy P.C.B NOTE1 On Aluminum Substrate NOTE2 I(AV) 0.5 0.8 A Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed On Rated Load (JEDEC Method) IFSM 35.0 A Rating for Fusing (t<8.3ms) I2t 5.0 A2sec Maximum Instantaneous Forward Voltage Drop Per Leg at 0.4A VF 1.0 V Maximum DC Reverse Current at Rated DC Blocking Voltage Per Leg TA=25°C TA=125°C IR 5.0 100 uA Typical Junction Capacitance Per LegNOTE3 CJ 13.0 pF Typical Thermal Resistance Per Leg NOTE1 NOTE2 NOTE1 RθJA RθJA RθJL 85.0 70.0 20.0 °C/W Operating Junction and Storage Temperature Range TJ, TSTG –55 to +150 °C Stresses above may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated in the Electrical Characteristics are not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. NOTE3: Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts
Figure 2. Maximum Non-Repetitive Peak Forward
AiT Semiconductor Inc. www.ait-ic.com S1ZB60 BRIDGE RECTIFIER REVERSE VOL TAGE 600V FORWARD CURRET 50A REV1.0 - JAN 2015 RELEASED - - 4 -
PACKAGE INFORMATION
Dimension in TO-269AA Package (Unit: mm)
AiT Semiconductor Inc. www.ait-ic.com S1ZB60 BRIDGE RECTIFIER REVERSE VOL TAGE 600V FORWARD CURRET 50A REV1.0 - JAN 2015 RELEASED - - 5 - IMPORTANT NOTICE AiT Semiconductor Inc. (AiT) reserves the right to make changes to any its product, specifications, to discontinue any integrated circuit product or service without notice, and advises its customers to obtain the latest version of relevant information to verify, before placing orders, that the information being relied on is current. AiT Semiconductor Inc. 's integrated circuit products are not designed, intended, authorized, or warranted to be suitable for use in life support applications, devices or systems or other critical applications. Use of AiT products in such applications is understood to be fully at the risk of the customer. As used herein may involve potential risks of death, personal injury, or servere property, or environmental damage. In order to minimize risks associated with the customer's applications, the customer should provide adequate design and operating safeguards. AiT Semiconductor Inc . assumes to no liability to customer product design or application support. AiT warrants the performance of its products of the specifications applicable at the time of sale.