S1JL MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
Features
- For surface mounted applications
- Low reverse leakage current
- Low forward voltage drop
- High surge capacity
- Meet UL flammability classification 94V-0 Mechanical Data
- Case: JEDEC SOD-123FL molded plastic
- Polarity: Colour band denotes cathode
- Mounting position: Any
Applications
- For use in low voltage, high frequency inverters, polarity protection applications Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristics Symbol S1JL S1ML Unit Marking S1JL S1ML Maximum Repetitive Peak Reverse Voltage VRRM 600 1000 VMaximum RMS Voltage VRMS 420 700 Maximum DC Blocking voltage VDC 600 1000 Maximum Average Forward Rectified Current @TL=100°C I(AV) 1 APeak Forward Surge Current, 8.3mS Single Half Sine-Wave, Superimposed on Rated Load (JEDEC Method) IFSM 25 I2t Rating for Fusing (t<8.3mS) I2t 2.6 A2s Peak Forward Voltage at 1.0A DC (Note1) VF 1.1 V Maximum DC Reverse Current @TJ=25°C at Rated DC Blocking Voltage @TJ=125°C IR μA Typical Thermal Resistance Junction to Lead RθJL 35 nS Typical Thermal Resistance Junction to Ambient RθJA 150 °C/W Operating Junction Temperature Range TJ -55 to +150 Storage Temperature Range TSTG -55 to +150 NOTE: 1. 300uS pulse width, 2%duty cycle. 3. The typical data above is for reference only .
Page <2> V1.007/09/22 Rectifier Diodes Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Rating and Characteristic Curves
Page <3> V1.007/09/22 Rectifier Diodes Newark.com/multicomp-pro Farnell.com/multicomp-pro sg.element14.com/b/multicomp-pro Important Notice : This data sheet and its contents (the “Information”) belong to the members of the AVNET group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp Pro is the registered trademark of Premier Farnell Limited 2019. Packaging Dimensions Part Number Table Description Part Number Rectifier Diode, 1A, 600V, SOD-123FL S1JL Rectifier Diode, 1A, 1000V, SOD-123FL S1ML Dimensions : Inches (Millimetres) Cathode Anode SOD-123FL