S1A MIC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts S1A THRU S1M CURRENT 1.0 Ampere
FEATURES
- For surface mounted applications
- Glass passivated junction
- Low profile package
- Built-in strain relief, ideal for automated placement
- Plastic package has underwrites laboratory flammability Classification 94V-0
- High temperature soldering guaranteed: 250℃/10 second at terminals MECHANICAL DATA
- Case: JEDED SMA (DO-214AC) molded plastic
- Terminals: Plated axial lead solderable per MIL-STD-750, method 2026
- Polarity: Color band denotes cathode end
- Mounting position: Any
- Weight: 0.002ounce, 0.064 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
- Ratings at 25℃ ambient temperature unless otherwise specified.
- Single phase, half wave, 60Hz, resistive or inductive load.
- For capacitive load derate current by 20% SYMBOLS S1A S1B S1D S1G S1J S1K S1M UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current (see Fig.1) IF(AV) 1.0 Amps Peak Forward Surge Current 8.3ms single half sine wave superimposed on rated load (JEDEC method) TL=90℃ IFSM 30 Amps Maximum Instantaneous Forward Voltage at 1.0A VF 1.1 Volts TA = 25℃ 5.0 Maximum DC Reverse Current at rated DC Blocking Voltage at TA = 125℃ IR 50 µA RθJA 50 Typical Junction Capacitance (NOTE 1) RθJL 90 ℃/W Typical Thermal Resistance (NOTE 2) trr 1.8 µs Operating and Storage Temperature Range TJ,TSTG -55 to +150 ℃ Notes: 2. Reverse recovery test condition: IF=0.5A, IR=1.0A, Irr=0.25A DO-214AC(SMA) Dimensions in inches and (millimeters)
SURFACE MOUNT GLASS PASSIVATED JUNCTION RECTIFIER E-mail: sales@cnmic.com Web Site: www.cnmic.com VOLTAGE RANGE 50 to 1000 Volts S1A THRU S1M CURRENT 1.0 Ampere Thick Copper Pad Areas 0.2 0.6 0.4 0.8 1.0 16014012010080604020 Resistive or Inductive Load LEAD TEMPERATURE,()℃ F1G.1-FORWARD CURRENT DERATING CURVE 1.2 AVERAGE FORWARD CURRENT(A) 1,000 100 0.010.11.010100 S1(A,J) S1(K,M) X0.5mil inches (0.013mm) Thick Copper Land Areas Units Mounted on TRANSIENT THERMAL IMPEDANCE( /W)℃ T, PULSE DURATION (SEC.) F1G.6-TRANSIENT THERMAL IMPEDANCEF1G.5-TYPICAL JUNCTION CAPACITANCE 100101.00.10.01 JUNCTION CAPACITANCE,(pF) REVRESE VOLTAGE,(V) 100 Vsig=50mVp-p f=1MHz T =25℃J INSTANTANEOUS FORWARD VOLTAGE,(V) FORWARD CHARACTERISTICS F1G.3-TYPICAL INSTANTANEOUS (A) INSTANTANEOUS FORWARD CURRENT, 1% Duty Cycle Pulse Width=300us T =25℃J F1G.4-TYPICAL REVERSE CHARACTERISTICS REVERSE VOLTAGE,(%) PERCENT OF RATED PEAK INSTANTANEOUS REVERSE Leakage CURRENT,(A) JT =25℃ T =75℃J JT =125℃ FORWARD SURGE CURRENT F1G.2-MAXIMUM NON-REPETITIVE PEAK CURRENT,(A) PEAK FORWARD SURGE NUMBER OF CYCLES AT 60 Hz 2.01.61.20.8 1.0 0.4 0.1 0.010.001 0.01 1.0 801006040200 100101 0.1 LT =90℃ (JEDEC Method) 8.3ms Single Half Sine-Wave 100