S1A-S1M TGS | Alldatasheet
Document overview
- PDF pages: 1
Technical content
VOLTAGE: 50 TO 1000VCURRENT: 1.0A
FEATURES
- Ideal for surface mount pick and place application
- Low profile package
- Built-in strain relief
- High surge capability
- High temperature soldering guaranteed: 260 oC/10sec/at terminal MECHANICAL DATA
- Terminal: Plated leads solderable per MIL-STD 202E, method 208C
- Case: Molded with UL-94 Class V-O recognized flame retardant epoxy
- Polarity: Color band denotes cathode MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS SYMBOL S1A S1B S1D S1G S1J S1K S1M UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current (TL=100oC) Peak Forward Surge Current (8.3ms single half sine-wave superimposed on rated load) Maximum Instantaneous Forward Voltage (at rated forward current) Maximum DC Reverse Current T a=25oC µA (at rated DC blocking voltage) Ta=125oC µA Typical Junction Capacitance (Note 1) CJ pF Typical Thermal Resistance (Note 2) Rθ(ja) oC/W Storage and Operation Junction Temperature TSTG,TJ oC Note: 1.Measured at 1.0 MHz and applied voltage of 4.0Vdc 2.Thermal resistance from junction to terminal mounted on 5×5mm copper pad area PASSIVATED RECTIFIER SURFACE MOUNT GLASS S1A THRU S1M V -65 to +150 IR 5.0 200 (Single-phase, half-wave, 60Hz, resistive or inductive load rating at 25oC, unless otherwise stated, for capacitive load, derate current by 20%) RATINGS IF(AV) 1.0 A IFSM A VF 1.1 TECHNICAL SPECIFICATION SMA/DO-214AC Dimensions in inches and (millimeters) ABCD EFG H B CA D G H F TIGER ELECTRONIC CO.,LTD