Datasheet search site | www.alldatasheet.com
Document overview
- Manufacturer or author: Julie Dargie
- PDF pages: 3
Technical content
standexelectronics.comDatasheet Rev BEA Page 1 +1 970.879.9900 | sensorsales@standexelectronics.com S18-275VPD-RICB1E Digital Ferrous Metal Detection Sensor Ferrous Metal Hall Proximity Sensor .375” detection gap PNP output Stainless 18x1mm x 53mm housing 4 pin male micro connector on 11” jacketed pur cable Part Description: S 18 - 275 VPD - RICB 1 E Housing Sensor Type & Function Electrical Option Connection Type S = Stainless Steel, Thread Pitch M18x1, 53mm Long Digital Ferrous Metal Proximity Sensor RI Regulated In, PNP 4 Pin Male Micro Conn. on 11” Jacketed Pur Cable ‘Digital Output switches on when Ferrous Metal is present’
DESCRIPTION
- Digital output turns on when ferrous metal is detected
- Programmed to detect a large steel target at 0.375”
- Target detection gap is dependent on shape/size/ferrous content.
- Custom programming available for precision repeatable detection of targets, contact Sensor Solutions.
- Provided lock nuts used to set air gap from target.
FEATURES
- True Zero Speed
- Large Detection Gap
- Internal Hysteresis
- Detects Through Aluminum CUSTOMER FOCUSED ENGINEERING + MODULAR DESIGN HOUSING - Aluminum, stainless steel, plastic, threaded, flange mount, customer specific ELECTRICAL - Every sensor function available in various electrical options (NPN, PNP, TTL, etc.) CONNECTION - Deutsch, Amphenol, many other brands, free end wires, pigtails, any length Need a Custom Sensor Solution?... Send us your application specific requirements at sensorso.com Modify, update, or enhance any sensor with our modular features and functionality.
standexelectronics.comDatasheet Rev BEA Page 2 +1 970.879.9900 | sensorsales@standexelectronics.com Environmental Specifications Corrosion Resistance 500 hours salt spray ASTM B-117 Installation Torque 60 Foot-Pounds Maximum Enclosure Nema 1,3,4,6,13 & IEC IP67 Vibration 10 G’s 2 to 2000 Hz Sinusodal Mechanical Shock 100 G’s, 11 mS Half-Sine S18-275VPD-RICB1E Digital Ferrous Metal Detection Sensor Electrical Specifications Conditions Min Max Unit Temperature Range* Operating -20 +85 Deg C Supply Voltage, Vcc Operating +8.0 +30 Volts DC Supply Current Into Vcc, Vout Low (typ 8) +16 mA Output Resistance Inside Sensor, Vo-Vout 256 285 mA Frequency Range 0 500* Hz Digital Voltage Low Vol Rload = 1k 0 0.6 Volts Digital Voltage High Voh Vcc = 24, Rload =1k 18 20 Volts Output Rise Time 10-90% Rload=1k, C<100 pF - 1 µS Output Fall Time 90-10% Rload=1k, C<100 pF - 10 µS Output Capacitance, Vout-Gnd Inside Sensor - 540 pF Input Capacitance, Vcc-Gnd Inside Sensor - 5400 pF * Can be programmed for operation up to 2000 Hz, contact factory. Functional Characteristics @25°C Min Typ Max Sensor Programming + target ferrous content, shape, & size will affect gaps Output State, No Target Present: Low (~0V) Detect Large Steel Target Hysteresis, Large Steel Target T=25C .020” .050” .080” Detect 0.5” ø Steel Target - .360” - Detect 0.1” ø Steel Target - .215” - ** Frequency, Detection and Hysteresis are Factory Programmable and can be decreased upon request. Rev B Absolute Max Limits Min Max Unit Supply Voltage, Vcc -24 +30 Volts DC Voltage at Output -5 +30 Volts Reverse Supply Current - 5.0 mA Peak Output Current -10 +10 mA Vout Short Circuit Duration - 10 Minutes Connections Chart Pin 1 Vcc Pin 3 Ground Pin 2 Digital Vout Pin 4 Program, Leave Open CB1E-275VPD Note: Check our website or contact us for details on all our ferrous metal detection options. Caution: A short from the Pin 4 (Green) Program wire to either Pin 1 (Red) Vccor Pin 2 (Black) Ground wire will cause component failure.
standexelectronics.comDatasheet Rev BEA Page 3 +1 970.879.9900 | sensorsales@standexelectronics.com Marking Handling Instructions Please note: All technical specifications on this series datasheet refer to the standard product range. Modifications in the sense of technical progress are reserved. For general information only. For more specific information, please consult the product datasheet, available upon request. This series datasheet could contain technical inaccuracies or typographical errors. Changes are periodically made to the information herein. These change will be incorporated in future revisions. For deviating values, most current specifications and products please contact your nearest sales office. S18-275VPD-RICB1E Digital Ferrous Metal Detection Sensor DO NOT CONTACT FACE TO FACE CONTACT WITH OTHER MAGNETS MAY REDUCE THE MAXIMUM OPERATING GAP Date Code ‘YYM’ YY = YEAR, M = MONTH A JAN D APR H JUL L OCT B FEB E MAY J AUG M NOV C MAR G JUN K SEP N DEC RI, Regulated in, PNP CHARACTERISTIC-OPTION_PROGRAMMING MARKED ON THIS SURFACE yy = PROGRAM # 275VPD-RI_yy 06A DATE CODE, THIS SURFACE SENSOR 5V REG 270 PNP 470pF 4700pF LOAD