S114 NKK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Low Capacity Standard Size Toggles Series S GENERAL SPECIFICATIONS FOR S100s Electrical Capacity (Resistive & Inductive Load) Power Level: Shown in the following table Ratings Contact Resistance: 10 milliohms maximum Insulation Resistance: 200 megohms minimum @ 500V DC Dielectric Strength: 1,500V AC minimum for 1 minute minimum Mechanical Life: 30,000 operations minimum Electrical Life: 10,000 operations minimum Operating Temp Range: –10°C through +70°C (+14°F through +158°F) Materials & Finishes Toggle: Brass with chrome plating Bushing: Brass with chrome or nickel plating Case: Phenolic resin Case Cover: Steel with zinc plating Movable Contactor Plate: Copper with silver plating Movable & Stationary Contacts: Silver alloy plus copper with silver plating Terminals: Copper with silver plating Installation Mounting Torque: 2.94Nm (26 lb•in) for double nut Soldering Time & Temperature: Manual Soldering: See Profile A in Supplement section. Standards & Certifications CSA Certified: Certified at 5A @ 125V AC & 2A @ 250V AC; CSA File No. 023535-0-000. Add “/C” to end of part number to order CSA mark on switch.
- Standard Hardware: AT504M Knurled Nut, AT508 Lockwasher, AT527M Backup Hex Nut. See Accessories & Hardware section. S116 Maximum Panel Thickness: .158” (4.0mm) (12.5) Dia .492 (11.5) .453 (1.5) .060 S114 & S116 S116R Black Polyamide Paddle S114 does not have terminals 3 & 6 (9.0) .354 (29.0) 1.142 (4.0) .157 Keyway (17.6) .693 (6.0) Dia .236 25° (10.35) Typ .407 (10.0) .394 (18.0) .709 (22.9) .902 (5.5) .217 (4.0) .157 (2.3) Dia .090 (3.8) Typ .150 (2.0) Dia Typ .079M12 P1 (27.8) 1.094 6 3 4 1 (0.8) Typ .031 (0.3) Typ .012 S114, S116, & S116R Toggle Position/Connected Terminals Electrical Capacity Model Approvals Pole & Throw Down Center Up Resistive Inductive Angle of Throw AC 125V AC 250V DC 30V AC 125V PF 0.6 S114 — DPST ON 2-1 5-4 NONE OFF — 5A 2A 5A 3A 25° S116 — DPDT ON 2-1 5-4 NONE ON 2-3 5-6 5A 2A 5A 3A 25° S116R — — DPDT ON 2-1 5-4 NONE ON 2-3 5-6 5A 2A 5A 3A 25° Throw & Schematics: DPST Keyway 1 4 2 5 (COM) 1 3 4 6 2 5 (COM) DPDT Note: Terminal numbers are actually on the switch