SS12FP ONSEMI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 6

Technical content

Features

  • Larger Cathode Pad for Improved Power Dissipation
  • Ultra Thin Profile − Package Height < 1.0 mm
  • High Surge Current Capability
  • Low Power Loss, High Efficiency
  • UL Flammability 94V−0 Classification
  • MSL 1 per J−STD−020
  • These Devices are Pb−Free and are RoHS Compliant ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise noted) Symbol Parameter Value Unit SS12 FP SS13 FP SS14 FP SS16 FP S110 FP S115 FP VRRM Repetitive Peak Reverse Voltage 20 30 40 60 100 150 V VRMS RMS Reverse Voltage 14 21 28 42 70 105 V VR DC Blocking Voltage 20 30 40 60 100 150 V IF(AV) Average Forward Rectified Current 1 A IFSM Peak Forward Surge Current: 8.3 ms Single Half Sine−Wave Superimposed on Rated Load 30 A TJ Operating Junction Temperature Range −55 to +125 −55 to +150 °C TSTG Storage Temperature Range −55 to +150 °C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. SOD−123EP CASE 425AC See detailed ordering and shipping information on page 2 of this data sheet.

ORDERING INFORMATION

&ZXFP&G &Y = Binary Calendar Year Coding &Z = Assembly Plant Code XFP = Specific Device Code &G = Single Digit Week Code Cathode Anode 1 1 Band Indicates Cathode

SS12FP − S115FP www.onsemi.com THERMAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Note 1) Symbol Parameter Value Unit /C0089JL Thermal Characteristics, Junction−to−Lead (Note 2) 10 °C/W R/C0113JA Thermal Resistance, Junction−to−Ambient 140 °C/W 2. Thermocouple soldered at cathode lead. ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Symbol Parameter Conditions Value Unit SS12 FP SS13 FP SS14 FP SS16 FP S110 FP S115 FP VF Maximum Instantaneous Forward Voltage (Note 3) IR Maximum Reverse Current at Rated VR TJ = 25°C 0.40 0.05 mA TJ = 125°C 0.50 CJ Typical Junction Capacitance VR = 4 V, f = 1 MHz 54 28 pF Trr Typical Reverse Recovery Time IF = 0.5 A, IR = 1 A, IRR = 0.25 A 6 14 ns Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse test with PW = 300 /C0109s, 1% duty cycle. Part Number Device Code Marking Package Packing Method† SS12FP 2FP SOD−123EP Tape and Reel SS13FP 3FP SOD−123EP Tape and Reel SS14FP 4FP SOD−123EP Tape and Reel SS16FP 6FP SOD−123EP Tape and Reel S110FP 0FP SOD−123EP Tape and Reel S115FP AFP SOD−123EP Tape and Reel †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.

SOD−123EP CASE 425AC ISSUE O DATE 31 AUG 2016 2.30 1.40 1.25 0.55 3.90 3.50 0.30 0.101.00 0.75 3.00 2.60 1.95 1.65 1.15 0.85 2.30 1.90 1.20 0.55 0.40 2.05 1.65 2.05 1.65 0.25 1.25 0.85 NOTES: A. NO INDUSTRY STANDARD APPLIES TO THIS PACKAGE. B. ALL DIMENSIONS ARE IN MILLIMETERS. C. DIMENSIONS ARE EXCLUSIVE OF BURRS, MOLD FLASH AND TIE BAR PROTRUSIONS. LAND PATTERN RECOMMENDATION LONG PAD IS CATHODE MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS 98AON13723GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1SOD−123EP onsemi and are trademarks of Semiconductor Components Industries, LLC dba onsemi or its subsidiaries in the United States and/or other countries. onsemi reserves the right to make changes without further notice to any products herein. onsemi makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. onsemi does not convey any license under its patent rights nor the rights of others. © Semiconductor Components Industries, LLC, 2016 www.onsemi.com

onsemi, , and other names, marks, and brands are registered and/or common law trademarks of Semiconductor Components Industries, LLC dba “onsemi” or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemi’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided “as−is” and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. “Typical” parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. ADDITIONAL INFORMATION TECHNICAL PUBLICATIONS: Technical Library: www.onsemi.com/design/resources/technical−documentation onsemi Website: www.onsemi.com ONLINE SUPPORT: www.onsemi.com/support For additional information, please contact your local Sales Representative at www.onsemi.com/support/sales