S10A20FR SENSITRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
- 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
- World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SEMICONDUCTOR TECHNICAL DATA DATA SHEET 2014, REV. A THREE PHASE FULL WAVE BRIDGE RECTIFIER ASSEMBLY DESCRIPTION: A 200/400/600 VOLT , 7.5 AMP, 150 NANOSECOND THREE PHASE BRIDGE RECTIFIER ASSEMBLY. MAX. RATINGS / ELECTRICAL CHARACTERISTICS All ratings are at T A = 25oC unless otherwise specified. RATING CONDITIONS MIN TYP MAX UNIT Peak Inverse Voltage (PIV) S10A20FR S10A40FR S10A60FR - - - 200 400 600 Vdc Average DC Output Current (TC = Case Temp) (Io) TC = 55 oC TC = 100 oC TC = 125 oC - - 10 7.5 5.0 Amps Average DC Output Current Ambient Temp. (no heat sink) (Io) TA = 25 oC TA = 55 Oc TA = 100 Oc - - 4.0 3.0 2.0 Amps Peak Single Cycle Surge Current (IFSM) tp = 8.3 ms Single Half Cycle Sine Wave, Superimposed On Rated Load - - 100 Amps(pk) Peak Recurring Surge Current (IFRM) TA = 25 oC - - 50 Amps Operating and Storage Temp. (Top & Tstg) - -55 - +150 °C Maximum Forward Voltage (Vf) If = 9.0A (300 µsec pulse, duty cycle < 2%) - - 1.6 Volts Maximum Instantaneous Reverse Current At Rated (PIV) TA = 25° C TA = 100° C - - 2.0 100 µAmps Reverse Recovery Time (trr) If = 0.5A, Ir = 1.0A, Irr = 0.25A - - 250 nsec Thermal Resistance (θJL) - - - 2.0 °C/W S10A20FR S10A40FR S10A60FR
- 221 West Industry Court Deer Park, NY 11729-4681 Phone (631) 586 7600 Fax (631) 242 9798 •
- World Wide Web - http://www.sensitron.com • E-Mail Address - sales@sensitron.com • SENSITRON TECHNICAL DATA DATA SHEET 2014, REV. - MECHANICAL DIMENSIONS: In Inches / mm AC AC .750 (19.05) .750 (19.05) .40 (10.16) .090 (2.286) .070 (1.778) .109 (2.768) .300 Max. (7.62) .500 Max. (12.70) .147 Dia. (3.734) C'Bore .235(5.97) Dia. x 0.15(3.81) Dp. AC AC Note: Case finish - Black Anodized S10A20FR S10A40FR S10A60FR DISCLAIMER: 1- The information given herein, including the specifications and dimens ions, is subject to change without prior notice to impr ove product characteristics. Before ordering, purchas ers are advised to contact the Sensitron Semiconductor sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliabilit y is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall Sensitron Semiconductor be liable for any dam ages that may result from an accident or any other cause duri ng operation of the user’s units according to the datas heet(s). Sensitron Semiconductor assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall Sensitron Semiconductor be liable for any fa ilure in a semiconductor device or any secondary damage result ing from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or Sensitron Semiconductor. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or par t, without the expressed written permissio n of Sensitron Semiconductor. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations. FIG. 401