RV4NAYSD505B

380 HONEYWELL | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 7

Technical content

Series 380, 53/RV4, 485 Series 380, 53/RV4, 485, Electrical Specifications

2 Watt, Conductive Plastic ;

Potentiometer Resistance Range 502 to 5 Megohms, linear. 250. to 2.5 Megohms, tapered. 485 series only, 100Q to 2.5 Megohm, linear. i * Resistance Tolerance is Linear, up to 1 Megohm +10%, above 1 Megohm +20%. : Tapers, up to 500KQ +10%; above 500KQ +20%. a : _ ae Power Rating (Watts) ae ‘3 o a 2 watts maximum continuous power rating for linear Bi i ila taper, but voltage not to exceed rating. Full rating bisa, ae a @ 70°C, derated linearly to zero watts at 120°C. Derate all non-linear tapers by multiplying wattage rating by 0.5. See Chart A, page 44. __ ee Electrical Rotation 312° +3° without switch; 333° +3° with switch. oO Effective Rotation mn 270°, -0°/ +10°

Description

. Tapers The Series 380 “Quiet One” is a 2-watt conductive Right or left-hand available. plastic potentiometer offering superior dynamic noise See Chart B, page 45. and a long rotational life. And it’s manufactured to MIL-R-94 specifications where applicable. End Resistance . Linear units: 4Q maximum for total resistances up to Our 53/RV4 is a dual-marked potentiometer with all the — 250K; 10Q for resistances 250K and higher. fine features of the Series 380 in a more economical Taper units: High end of element 1% of total resistance package. And it’s built in strict accordance with MIL- or 4Q whichever is greater; low end same as for R-94, linear units. Series 485 has all the exceptional features of the 380 Dielectric Strength with a bonus of ten times the rotational life. (Special 1000 Vac for 60 seconds @ ATM pressure. order only.) 450 Vac for 60 seconds @ 3.4 in. Hg. Working Voltage Features 500 Vdc across end terminals, but power not to exceed rating. Series 380 ° 1% dyn amic noise Resistance Temperature Characteristics 100,000 cycle life See Chart C, page 45. tainless-steel shaft Stainless-steel shaft Dynamic Noise © Series 53/RV4 Linear single controls maximum initial noise level of Economical 1% of total resistance, Measurement made using a Wide range of values and tapers constant current source and oscilloscope detection Shaft and mounting seals available technique.

5 Static noise

© Series 485 1% dynamic noise See Chart D, page 45. I million cycle life Linearity Availabl ial ord y vailable on special order only +5% independent — linear tapers only Voltage Coefficient .005%/Volt, maximum Switch Characteristics Rotary See Chart E, page 47.

Mechanical Rotation Operating Temperature Range 312° +3° without switch; 333° +3° with switch -55°C to +120°C Stop Torque Withstanding Strength Rotational Life (Standard) 12 Ib. in. minimum, single shaft Series 380: Rotational life for linear control; 100,000 8 Ib. in. minimum, concentric shaft cycles for units up to and including 100,000Q, change not to exceed 5% R; above 100,000Q change not to Torque Range exceed 10% R. through mechanical rotation within a control. Series 485: 10% maximum change in total resistance as Single control with shaft seal 1 0z. in. to 6 oz. in. a result of 1,500,000 shaft rotations life test under full Single control with shaft locking feature and jam nut load for resistance values 1K to 2.5 Megohms; tightened to 10 Ib. in. Starting torque is 30 oz. in. 1,000,000 shaft rotations under full load for resistance values 100 to 1KQ. Standard Bushing Lengths (12.7mm) Chart A Panel Seal, 3/8 in. (9.53mm) Tread 38 (53mm). 32 NEFA — Other bushings available on special order. we LETT TTT TT TT TT TT LTT TTT TART TTT TT yt Standard Shafts (Single Control Only) [TTT TEEN Err Standard diameter 1/4 in. (6.35mm). Standard lengths ° CEE iweLe_ eee every 1/8 in. (3.18mm) from 3/8 in. (9.53mm) minimum iy to 5 in. (127 mm) maximum. 380, stainless steel. Ld BRR enEe Coenen 53/RV4 and 485 brass, nickel-plated. | Available in round, slotted or flatted configurations. All » Ltt Tt tT shafts measured from mounting surface. Other shaft i Ltt ty ery tT tT tt configurations available on special order. ° TTT TT Err y erty we BCoccceee ee ‘eight g Single .072 lbs. approximate 8 bed HH HE Hardware on Must be ordered separately. Pye eye Ty (a) Hex mounting nut, 3/8 in. (9.53mm) x 32 -NEF-2A oa-LET TT TTT TAT Te thread, 1/2 in. (12.7mm) across flats, 3/32 in. Pt Tey eT ery yy (2.38mm) thick. ; o-tLTTT TTT Tr ry TT Ty (c)Jam hex nut, 1/2 in. (12.7mm) across flats, 7/32 in. ° eA AA (5.56mm) thick, supplied on locking-type bushing. COCCELELEEELLeeeeo Marking ° ° o 10 wo Will appear on rear surface without switch, On periphery when switch is used. Unless otherwise ‘TEMPERATURE IN DEGREES CENTIGRADE specified, marking will consist of: (a) Customer part number or Clarostat part number, (b) EIA source and date code. NOTE: SPECIFICATIONS SUBJECT TO CHANGE, WITHOUT NOTICE.

me”: gee Chart B Chart D ; * “TAT T TTT coe we coe Y A 7 Trier voi EE PEEREE rer \\|

4 A Yt | AL

reco ttn an ar FTE tit tt | ‘The "Z" taper attains 10% resistance value at 50% of clockwise NOISE IN DB rotation (left-hand). ‘The reverse "Z" taper attains 10% resistance values at 50% of counter-clockwise rotation (right-hand). For conformity and special output curves, consult factory. Chart C Resistance Temperature Characteristics NOMINAL | ___ MAXIMUM PERCENT TEMPORARY RESISTANCE FROM 25°C | RESISTANCE | 55°C | -40°C_ tas 425°C _| 85°C _ +105°C | +120°C | woooHms | +50 | +30 | #15 o | 45 | 25 | 85 WOKOHMS | 355 +40 | +20 | 0 | 425 | 330 | m0 | 100K OHMS | +6.5 +55 +20 | 0 4.0 | 155 | 1MEGOHMS | +90 | +80 | +25 0 5 | 155 | 47.0

Series 380, 53/RV4 Dimensions + 1/32 [0.97] 9/16 [14.20mm] 1/64 (2.78 13/32 WAX. NEF-2A ef of _ + i ae } 250 DA[6.35em] i} 17/32 a ne | i! i} \\ L L a 3 5 | 4 SHAT LENGTH cvoahaaey 13/82 [27-78mm] MOUNTING SURFACE MOUNTING SURFACE Tia Yoen]| [ ESenen) 07 +20 J [1.90mm +2931 im ii; feta AD Ce uy son OPTIONAL SPLIT BUSHING JAM NUT SUPPLIED

e/ 7, tar) Tren) . 100 4. POSTION ee Y . (| wo \\ =o GS AA B WSS are 5 -U v4 Po LR NY _ mm ton Ne F& % Sees Type Terminal Max. Operating No. Switch Variations Positions Torque-0z. In. OOP I AE-21 DP. 1 Pole on, 1 Pole off—1A, 250V.; 3A, 125V. (AcorDC) 1-2-3-4 16 Sees * May be employed as a single pole, single throw, two circuit switch. To Designate this application add an “A” to the end of switch type. Example: AE-20A

Series 380 Standard Resistance Values Series 53 Standard Resistance Values Stock Values (Ohms) Series 380C1 Series 53: Brass, nickel-plated shaft. Economical version of 380. 50 1000 10K eid I mee, Series 53 Stock Values (Ohms) 1 15K 1 . 10 ON ae OKO meg. 53CI, 53C2, 53C3 Linear 250 2500 = 25K 250K 2.5 * 350" 3500" 35K «350K. 3 meg 50 1500 20K 250K = 3. Meg 500 5000 50K 500K —-3.5 meg* 100 2000 25K 350K 3.5 Meg 750" 7500* 75K* 750K 4meg 150 2500 35K 500K 4 Meg 5 meg 250 3500 SOK 750K 5 Meg *Made-to-order; please consult Factory. 350 5000 75K 1 Meg 7.5 Meg 500 7500 100K 1.5 Meg 10 Meg Stock Values (Ohms) Series 38062 750 10K 150K 2.5 Meg 1000 15K 200K 50* 1000 10K 100K 1 meg 100 1500* ISK 150K 1.5 meg Dual Taper Z-Taper Reversed Z-Taper 1502000 20K 200K" 2 meg* DS3C1 53C1-Z S3CI-RZ 250 2500 25K 250K 2.5 meg* tf 350 3500 35K* 350K = 3 meg* 10K 500. 150K 10K 500 5000 SOK 500K 3.5 meg 25K 1K 200K 25K * \\* * * a 750* 7500" 75K* 750K* 4 meg SOK O(2SK (280K 50K *Made-to-order; please consult Factory. ior ok OK OK Stock Values (Ohms) Series 380C3 500K 15K 1 Meg 500K

1 Meg 20K 2 Meg

50 1000. 10K 100K 1 meg 25K 2.5 Meg 100 1500 15K 150K 1.5 meg 50K 5 Meg 150* 2000 20K 200K 2 meg 100K 250 2500 25K 250K 2.5 meg 350* 3500 35K* 350K* 3 meg 500 5000 50K 500K 3.5 meg* Series 53 How to Order 750* 7500* 75K 750K 4meg Smeg Catalog *Made-to-order; please consult Factory. Number Description 53C1 2 in. (.50.5mm) round shaft FMS; 3/8 in. Series 380 How To Order (9.52mm) long bushing with 3/8 in. (9.52mm) x 32-NEF-2A thread. Catalog 53C2 5/8" screwdriver slotted shaft FMS; Number Description with a 1/2 in. (.50.5mm) split locking SR en ye ee bushing. 380C1_ 2" round shaft FMS; 3/8" long bushing with = 53C3 7/8 in (22.22mm) screwdriver slotted shaft 3/8 x 32-NEF-2A thread. FMS; 3/8 in. (9.52mm) long bushing with 38 in. (203.2mm) x 32-NEF 2A thread. 380C2 5/8" screwdriver slotted shaft FMS; with a 53CISW Unsealed version of 53C1 available 1/2" split locking bushing. for use with field assembled switches. Order as 53C1 SW 380C3 7/8" screwdriver slotted shaft FMS; 3/8” long see table 1 for switch ordering. bushing with 3/8 x 32-NEF-2A thread. 53C1-Z Same as 53C1 but with Z taper (see chart B, page 45). Example: 380-€1-10K-S 53C1-RZ Same as 53C1 but with Reversed Z taper (see chart B, page 45). DS3C1 Dual ganged. Bushing and shaft same am of 1K i as 53C1. Series Shaft & Bushing Resistance Value Taper ‘See Catalog Number (Ohms) See Chart B Table 1 and Description (Figure 2, Switches for 53C1 SW only. Must be ordered page 45) " separately on a made-to-order basis. 53-10 SPST-3A-125 Vac 53-20 DPST-3A-125 Vac 53-21 (Mod.) DPST-3A-125 Vac/de Series 53 How to Order, continued next page

Seven £9 es 6 Other contin. Series RV4 How To Order Example: 53-C1-SW-1Meg-S Example: RV4-N-A-Y-S-D-10-4-A i | amy # Series ‘Shaft & Bushing ‘Switch* Taper jes sistance See Catalog Number See Table 1, See Chart B Series ran Sionfows and Description Page 48 (Figure 2, Page 45) B= Rotary Digits ‘Resistance Value Bushing ‘Shaft Length FMS (Ohms) N = Standard, See table below “Leave blank if switch is not required. 3/8 in. (9.52mm) i x 3/8- Series RV4 Standard Resistance Values SUNER-IA Shall Ste Number of Le ee ~mm) F = Flatted kad That in, (12.7mm| ollow Series RV4: Military version of Series 53 long x 3/8- 32-NEF-2A, Standard Temperature S = Shaft & panel seal, Characteristic RV4 Stock Values (Ohms, Tolerance and Tapers) sender ct bashing, a _ — ~ T = Shaft & panel seal, B = +20% Linear RV4NAYSD RV4NAYSK locking bushing *C = Log CW £10% *D = Log CW £20% 500A 252A 753A 205B 101A*_ 503A tPoLee cow a208 101A 352A 104A 255B 251A* 104A* 10% restsrance ot 151A 502A 154A 355B SOIA* 254A 50% metannat 251A 752A 204A 505B 102A 504A rotation. 351A 103A 254A 252A* 105A* SO1A 153A 354A 502A 255B Shaft Length from Mounting Surface Table 751A 203A 504A 103A 505B — ee 102A 253A 754A 253A Shaft With 3/8 in. (9.52mm)Lg — With 1/2 in. (12.7mm) Lg 152A 353A 105A Length Code Bushings N & S Bushings L & T 202A 503A 155B 7 — A N/A 5/8 in. (15.88 mm) *Made-to-order; please consult Factory. B 1/2 in. (12.7 mm) N/A RVALAYSA RVANAYSB G 1 1/4in. B1.75 mm) N/A SOOA 252A 753A 205B 101A* 503A K 21/2 in. (63.5 mm) N/A 101A 352A 104A 255B 251A 104A . 151A 502A 154A 355B SOLA 254A N/A = Not available 251A 752A 204A 505B 102A 504A 351A 103A 254A 252A* 105A Series 485 How To Order SOIA 153A 354A 502A 255B 751A* 203A 504A 103A 50SB* Series 485 available on a made-to-order basis only. eA aie oN 253A, Please consult Factory for pricing, delivery, and 202A 503A 155B* minimums. *Made-to-order; please consult Factory. RV4LAYSD 101A 503A 251A 104A, SOIA = 254A 102A 504A 252A 105A 502A = 255B* 103A 505B 253A *Made-to-order; please consult Factory.