RV0003F SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet └ Screening 7/ __ = Not Screened TX = TX Level TXV = TXV S = S Level └ Recovery Time UF = Ultra Fast └ Voltage/Family 10 = 1000V 15 = 1500V 20 = 2000V 25 = 2500V 30 = 3000V 35 = 3500 V SGB10UF and SGB35UF 60 mA 1000 ─ 3500 VOLTS 60 nsec HIGH VOLTAGE RECTIFIER FEATURES:

  • Ultra Fast Recovery: 60nsec Maximum
  • PIV to 3500 Volts
  • Hermetically Sealed
  • Void-Free Construction
  • Metallurgically Bonded
  • 175°C Maximum Operating Temperature
  • Micro Miniature Package
  • TX, TXV, and Space Level Screening Available7/

ELECTRICAL CHARACTERISTICS

m Forward Voltage Maximum Surge Current (1 Cycle) Maximum Reverse Recovery Time Maximum Junction Capacitance Typical Thermal Impedance Symbol PIV I0 IR @ PIV VF 2/ IFSM tRR 5/ CJ θJL Units Volts mA μA Volts Amps nsec pF °C/W Conditions 25°C 100°C 25°C 100°C 25°C 25°C 25°C VR = 100V fT = 1MHZ L = 1/4" SGB10UF 1000 60 45 0.1 10 9.5 5 60 1.0 185 SGB15UF 1500 60 45 0.1 10 9.5 5 60 1.0 185 SGB20UF 2000 60 45 0.1 10 9.5 5 60 1.0 185 SGB25UF 2500 60 45 0.1 10 9.5 5 60 1.0 185 SGB30UF 3000 60 45 0.1 10 9.5 5 60 1.0 185 SGB35UF 3500 60 45 0.1 10 9.5 5 60 1.0 185 NOTES: 1. Operating and testing over 10,000 V/inch may require encapsulation or immersion in suitable dielectric material. 2. IF = I0; Maximum forward voltage measured with instantaneous forward pulse of 300msec minimum. 3. Maximum lead temperature for soldering is 250oC, 3/8" from case for 5 sec maximum. 4. Operating and Storage temperature: -65 to +175oC. 5. Reverse Recovery Test Conditions: IF = 50mA, IR = 100mA, IRR = 25mA, TA = 25oC. 6. Consult manufacturing for operating curves. 7. Screening based on MIL-PRF-19500. Screening flows available on request. Axial NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0003F DOC

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RV0003F DOC Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 s sdi@ssdi-power.com * www.ssdi-power.com SGB10UF and SGB35UF PACKAGE OUTLINE: AXIAL RECTIFIER DIMENSIONS DIM MIN MAX A -- .150” B -- .090” C 1.00” -- D .022” .028”