RTY360LVNAX HONEYWELL | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 10

Technical content

Hall-effect Rotary Position Sensors RTY Series with Integral Actuator RTP Series with External Actuator Datasheet

sensing.honeywell.com RTY Series and RTP Series Hall-effect Rotary Position Sensors The RTY Series and RTP Series Hall-effect Rotary Position Sensors provide non-contact sensing in harsh transportation and industrial applications at a competitive cost.

  • RTY Series: These shaft activated products are available in two versions: an integral shaft with or without a lever. The lever may allow customers to reduce the number of mechanical linkages required for their applications, which may reduce the cost of the overall customer solution.
  • RTP Series: Takes non-contact sensing to the next level by separating the magnet from the sensor body. The absence of the actuator shaft removes the wear and tear on the bearings caused by radial forces. A choice of a bare or a housed magnet is available. These products use a magnetically biased, Hall-effect integrated circuit (IC) to sense rotary movement of the actuator over a set operating range. Rotation of the actuator changes the magnet’s position relative to the IC. The resulting flux density change is converted to a linear output. The IC, together with conditioning and protection circuitry, is sealed in an IP69K-qualified rugged package for durability in most harsh environments. Eight operating ranges from 50 ° to 360° are tolerant to over-travel and allow use in most common applications. Low voltage and high voltage versions cover an input voltage range of 4.5 Vdc to 30 Vdc. Honeywell’s industry-leading capabilities in research and development provide the customer with known quality and support. RUGGED • LONG PRODUCT LIFE • NON-CONTACT SENSING

Features

  • True, non-contact operation
  • 35 M cycle product life (RTY Series); unlimited rotation (RTP Series)
  • Solid-state Hall-effect technology
  • Rugged IP69K-sealed package with integral connector
  • Automotive-grade EMI/EMC testing, integrated reverse polarity, and short circuit protection
  • Industry-standard AMP termination, 32 mm mounting pitch, North American or European pinout styles, and compact package
  • Eight operating ranges up to 360° Potential Applications TRANSPORTATION
  • Position and movement detection (pedals, throttles, gear shift, levers, steering, linkages, and hitches) in trucks, buses, off-road vehicles, cranes, and industrial/ construction/agricultural vehicles and equipment)
  • Suspension/kneeling position (buses, trucks)
  • Tilt/trim position (boat engines, tilling equipment) INDUSTRIAL
  • Valve control
  • HVAC damper control
  • Irrigation equipment pivot control

Table 2. Mechanical Specifications Table 1. Electrical Specifications Output signal delay 4 ms typ. (pull down to ground) 10 kOhm typ.

Table 3. Environmental Specifications 1 Does not apply RTY Series sensor shaft with lever. Figure 1. All Available Configurations

Figure 2. Product Nomenclature Copyright © 2015 Honeywell International Inc. All Rights Reserved.

5 Vdc

10 Vdc to 30 Vdc

1 360° Sensing Range Angle available upon request. 2 Customized housed magnet actuators available upon request. Copyright © 2015 Honeywell International Inc. All Rights Reserved.

Figure 3. RTY Series Mounting Dimensions (For reference only: mm [in.])

Figure 4. RTP Series Mounting Dimensions (For reference only: mm [in].)

sensing.honeywell.com RTY Series and RTP Series Table 4 RTY Series Functional Characteristics1 Characteristic Standard Output Inverted OutputSensing Angle Linearity Error2 Accuracy Error3 50° (±25°) ±1.0% ±1.6% 60° (±35°) 70° (±35°) 90° (±45°) 120° (±60°) 180° (±90°) 270° (±135°) 360° (±180°) 1 See Figure 3 for references to . 2 Linearity error is the deviation of the measured value from the best fit line and is the quotient of the measured output ratio deviation from the best fit line at the measured temperature to the best fit line output ratio span at the measured temperature. 3 Accuracy is measured as a deviation from the index line, where the index line is defined as the line with the ideal slope and sensor output voltage corrected at 0º position for its ideal value at 25 °C ±5 °C. Accuracy is valid only when the sensor output is correct at 0º position for its ideal value in the application. Output Voltage (Vdc) Actuator Position (°) 0.5 2.5 4.5 -25 -30 -35 -45 -60 -90 -135 +25 +30 +35 +45 +60 +90 +135 0.0 A B C Clamp High Clamp Low Output Voltage (Vdc) Actuator Position (°) 0.5 2.5 4.5 -25 -30 -35 -45 -60 -90 -135 +25 +30 +35 +45 +60 +90 +135 0.0 A B C Clamp High Clamp Low Output Voltage (Vdc) Actuator Position (°) 0.5 2.5 4.5 -180 +1800 0.0 A B C Output Voltage (Vdc) Actuator Position (°) 0.5 2.5 4.5 -180 +1800 0.0 A B C BA C

Table 5. RTP Series Functional Characteristics1 1 See Figure 4 for references to . fit line at the measured temperature to the best fit line output ratio span at the measured temperature.

Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell Sensing and Productivity Solutions’ products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Productivity Solutions Honeywell

9680 Old Bailes Road

Fort Mill, SC 29707 honeywell.com WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell’s standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer’s sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION

  • The information presented in this datasheet is for reference only. Do not use this document as a product installation guide.
  • Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. 32307665-B-EN IL50 March 2016 © 2016 Honeywell International Inc. All rights reserved. ADDITIONAL INFORMATION The following associated literature is available at sensing.honeywell.com:
  • Product Range Guide
  • Product Line Guide
  • Installation Instructions
  • Application Note