RTN02-10T ABCO | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

76 Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. Type Dimensions LWHL 1 L2 PQ Resistance Number Number Operating Type Power at Working Overload (ppm/˚C) J(± 5%) of of Temperature 70˚C Voltage Voltage E-12 Terminals Resistors Range THICK FILM CHIP RESISTORS NETWORK

  • RTN02-10T ¥CONSTRUCTION ¥DIMENSIONS ¥Standard electrical specifications 473 473 473 Plating(Ni+Sn) Overcoating Alumina Substrate H Q P W L <Circuits> SR TE Unit: mm RTN02-10T 25V 50V ± 20 33 Ω~1MΩ 10 8 -55 ˚C ~+125˚C ¥EXPLANATION OF PART NUMBERS (EX) RTN 02 10 T 103 JT P Type Size Number of Circuit Nominal Resistance Resistance Packing Circuits Structure ToleranceChip Resistors Networks T : Sn(Ti) Process J= ± 5%(see above)10 TP: Taping(Paper)• 3-Digit: E12 Series Ex 10Ω=100 1KΩ=102

1 W16

Specifications given herein may be changed at any time without prior notice. Please confirm technical specifications before your order and/or use. Type W M A B C D Type TP TE Type A B W E F P 0 PP 1 T1 T2 Item 5% Test Method ¥CHARACTERISTICS ¥REEL SPECIFICATION ¥PACKAGING: TP ¥BULK CASE /KBF /K31/K2E/K35 /K50/K31/K50/K54/K31 /K42 /K41 /K50/K30 /K46 /K45 /K57 /K54/K32/K2B/K30/K2E/K31 /K2B/K30/K54/K32 Unit: mm Unit: mm Unit: pcs EMBOSSED CARRIER DIRECTION OF FEED PAPER CARRIER /K42 /K43 /K44/K4D /K41 /K57 RTN02-10T 12.5 ± 1.5 178 ± 2.0 2.0 ± 0.5 13.5 ± 0.5 21.0 ± 0.5 60.0 ± 2.0 RTN02-10T 5,000 - ¥TAPING SPECIFICATIONS Carrier Tape Temperature Cycling Low Temperature Operation Short Time Overload Resistance to Soldering Heat Loading Life in Moisture Resistance to dry heat Load Life Solderability Dielectric Withstanding Voltage JIS-C5202-7.4 Cycle between -55˚C and +125˚C for 5 cycles MIL-R-55342-D 4.7.4 Followed by 45 Minutes of RCWV. JIS-C5202-5.5 Apply rated voltage 2.5 times for 5 seconds JIS-C5202-6.10 Immerse for 10 sec. in solder at 260 ± 3˚C JIS-C5202-7.9 40˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF JIS-C5202-7.2 96Hrs at 125˚C JIS-C5202-7.10 70˚C, 1000Hrs at RCWV, 1.5Hr ON, 0.5Hr OFF JIS-C5202-6.11 Immerse for 3 sec. in solder at 245 ± 3˚C JIS-C5202-5.7 Apply 300VAC for 1min ± (1.0% + 0.05Ω) ± (1.0% + 0.05Ω) ± (2.0% + 0.10Ω) ± (1.0% + 0.10Ω) ± (2.0% + 0.10Ω) ± (2.0% + 0.10Ω) ± (3.0% + 0.10Ω) Coverage 䥱 95% No short or burned on the appearance *RCWV=Rated Continuous Working Voltage

  • RTN02-10T