RTA-2405R30D1WR

RTA-2405R30D1WR RSG | Alldatasheet

Document overview

• PDF pages: 5

Technical content

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (5) RTA-R30D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de R-SERIES 3W, Ultra wide input isolated & regulated single output DC/DC converter Patent Protection RoHS

• Wide range of input voltage (4:1)
• Efficiency up to 84%
• No-load power consumption as low as 0.12W
• Isolation voltage:1.5K VDC
• Input under-voltage protection, output over-
• current protection, short-circuit protection
• Operating temperature range: -40℃ to +85℃
• Low ripple & noise
• International standard pin-out
• Meet IEC60950, UL60950,EN60950 standards RTA-R30D1WR series products are of 3W output power, extremely wide range of voltage input of 9 -36VDC, 18- 75VDC, isolation voltage of 1500VDC, outpu t short circuit protection, these products are widely used in fields such as industrial control, electric power, instruments and communication. Selection Guide Part No. Input Voltage (VDC) Output Efficiency (%,Typ.) @ Full Load Max. Capacitive Load(µF)Nominal (Range) Max. ① Output Voltage (VDC) Output Current (mA) (Max./Min.) RTA-2405R30D1WR (9-36) 5 600/0 78/80 2200 RTA-2412R30D1WR 12 250/0 80/82 680 RTA-2415R30D1WR 15 200/0 81/83 470 RTA-2424R30D1WR 24 125/0 80/82 100 RTA-4815R30D1WR 48 (18-75) 80 15 200/0 82/84 470 Notes: ①Exceeding the maximum input voltage may cause permanent damage; ②The efficiency value is measured in the input nominal voltage and output rated load. Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) 24VDC input -- 158/4 173/6 mA 48VDC input -- 79/3 81/5 Reflected Ripple Current 24VDC input -- 120 -- 48VDC input -- 60 -- Input impulse Voltage (1sec. max.) 24VDC input -0.7 -- 50 VDC 48VDC input -0.7 -- 100 Starting Voltage 24VDC input -- -- 9 48VDC input -- -- 18 Input under-voltage protection 24VDC input 5.5 6.5 -- 48VDC input 13 15.5 -- Starting Time Nominal input& constant resistance load -- 10 -- ms Input Filter C filter Ctrl* Module turn-on Ctrl pin floating or connected to TTL high level(3.5-12VDC) Module turn-off Ctrl pin connected to GND or low level(0-1.2VDC) Input current when switched off -- 6 10 mA Hot Plug Unavailable Note: *The voltage of Ctrl pin is relative to input pin GND. FEATURES: RTA-R30D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de R-SERIES 3W, Ultra wide input isolated & regulated single output DC/DC converter Patent Protection RoHS
• Wide range of input voltage (4:1)
• Efficiency up to 84%
• No-load power consumption as low as 0.12W
• Isolation voltage:1.5K VDC
• Input under-voltage protection, output over-
• current protection, short-circuit protection
• Operating temperature range: -40℃ to +85℃
• Low ripple & noise
• International standard pin-out
• Meet IEC60950, UL60950,EN60950 standards RTA-R30D1WR series products are of 3W output power, extremely wide range of voltage input of 9 -36VDC, 18- 75VDC, isolation voltage of 1500VDC, outpu t short circuit protection, these products are widely used in fields such as industrial control, electric power, instruments and communication. Selection Guide Part No. Input Voltage (VDC) Output Efficiency (%,Typ.) @ Full Load Max. Capacitive Load(µF)Nominal (Range) Max. ① Output Voltage (VDC) Output Current (mA) (Max./Min.) RTA-2405R30D1WR (9-36) 5 600/0 78/80 2200 RTA-2412R30D1WR 12 250/0 80/82 680 RTA-2415R30D1WR 15 200/0 81/83 470 RTA-2424R30D1WR 24 125/0 80/82 100 RTA-4815R30D1WR 48 (18-75) 80 15 200/0 82/84 470 Notes: ①Exceeding the maximum input voltage may cause permanent damage; ②The efficiency value is measured in the input nominal voltage and output rated load. Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) 24VDC input -- 158/4 173/6 mA 48VDC input -- 79/3 81/5 Reflected Ripple Current 24VDC input -- 120 -- 48VDC input -- 60 -- Input impulse Voltage (1sec. max.) 24VDC input -0.7 -- 50 VDC 48VDC input -0.7 -- 100 Starting Voltage 24VDC input -- -- 9 48VDC input -- -- 18 Input under-voltage protection 24VDC input 5.5 6.5 -- 48VDC input 13 15.5 -- Starting Time Nominal input& constant resistance load -- 10 -- ms Input Filter C filter Ctrl* Module turn-on Ctrl pin floating or connected to TTL high level(3.5-12VDC) Module turn-off Ctrl pin connected to GND or low level(0-1.2VDC) Input current when switched off -- 6 10 mA Hot Plug Unavailable Note: *The voltage of Ctrl pin is relative to input pin GND. FEATURES: DC/DC-Converter we energize electronics! an acal group company we energize electronics!
• 3W ultra wide input 4:1
• Isolated & regulated single output
• Efficiency up to 84%
• No load power consumption as low as 0.1W
• Isolation voltage: 1.5KVDC
• Input under-voltage protection, output over- current protection, short-circuit protection
• Operating temperature range: -40°C to 85°C
• Low ripple & noise
• International standard pin-out
• Meet IEC60950, UL60950, EN60950 standards RoHS 3W ultra wide input isolated & regulated single output RTA-R30D1WR

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 2 (5) DC/DC-Converter 3W ultra wide input isolated & regulated single output we energize electronics! an acal group company we energize electronics! RTA-R30D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de R-SERIES Output Specifications Item Operating Conditions Min. Typ. Max. Unit Output Voltage Accuracy -- ±1 ±3 %Line Regulation Full load, the input voltage is from low voltage to high voltage -- ±0.2 ±0.5 Load Regulation 0%-100% load -- ±0.5 ±1 Transient Recovery Time 25% load step change -- 300 500 µs Transient Response Deviation -- ±3 ±5 % Temperature Coefficient Full load -- -- ±0.03 %/℃ Ripple & Noise* 20MHz bandwidth,5%-100% load -- 30 120 mV p-p Over-current Protection Input voltage range -- 150 250 %Io Short circuit Protection Hiccup protection Note: *Ripple and noise are measured by “parallel cable” method, please see DC-DC Converter Application Notes for specific operation. 0%-5% load ripple&Noise is no more than 5%Vo. General Specifications Item Operating Conditions Min. Typ. Max. Unit Insulation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 1500 -- -- VDC Insulation Resistance Input-output, insulation voltage 500VDC 1000 -- -- MΩ Isolation Capacitance Input-output, 100KHz/0.1V -- 1000 -- pF Operating Temperature Derating if the temperature is ≥71℃ (see Fig. 1) -40 -- +85 Storage Temperature -55 -- +125 Casing Temperature Rise Ta=25℃, nominal input, full load output -- +65 -- Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- +300 Storage Humidity Non-condensing 5 -- 95 %RH Reflow Soldering Temperature Peak temp.≤245℃, maximum duration time≤60s at 217℃. For actual application, please refer to IPC/JEDEC J-STD-020D.1. Vibration 10-55Hz, 10G, 30 Min. along X, Y and Z Switching Frequency* PWM Mode -- 350 -- KHz MTBF MIL-HDBK-217F@25℃ 1000 -- -- K hours Note:*This series of products using low er frequency technology, the switching frequency value is the test value in full load, when the load is reduced to 50% or less, the switching frequency decreases with decreasing load. Physical Specifications Casing Material Black flame-retardant heat-proof plastic Dimensions 19.20*18.10*10.16 mm Weight 3.50g(Typ.) Cooling Method Free convection EMC Specifications EMI RE CISPR22/EN55022 CLASS B (see Fig.3 -② for recommended circuit) EMS ESD IEC/EN61000-4-2 Contact ±4KV perf. Criteria B RS IEC/EN61000-4-3 10V/m perf. Criteria A EFT IEC/EN61000-4-4 ±2KV (see Fig.3-① for recommended circuit) perf. Criteria B Surge IEC/EN61000-4-5 ±2KV (see Fig.3-① for recommended circuit) perf. Criteria B CS IEC/EN61000-4-6 3 Vr.m.s perf. Criteria A Immunities of voltage dip, drop and short interruption IEC/EN61000-4-29 0- 70% perf. Criteria B RTA-R30D1WR

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (5) DC/DC-Converter 3W ultra wide input isolated & regulated single output we energize electronics! an acal group company we energize electronics! RTA-R30D1WR RTA-R30D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de R-SERIES Product Characteristic Curve O p e ra ting T e mp e ra ture ( )℃ T e mp era ture De rating C urve Output Power Percentage(% ) -40 0 40 71 85 120 100 120 Sa fe O p e ra ting A re a Fig. 1 URB2405MT- 3WR3 100 9 12 15 18 21 24 27 30 33 36 E fficiency(% ) Input Voltage (V) E ffi ci ency Vs I nput Vol tage (F ul l L oad) URB2405MT- 3WR3 100 10 20 30 40 50 60 70 80 90 100 E fficiency(% ) Output Current Percentage (% ) Efficiency Vs Output Load(Vin=24V) URB4815MT- 3WR3 100 18 24 30 36 42 48 54 60 66 75 E fficiency(% ) Input Voltage (V) E ffi ci ency Vs I nput Vol tage (F ul l L oad) URB4815MT- 3WR3 100 10 20 30 40 50 60 70 80 90 100 E fficiency(% ) Output Current Percentage (% ) Efficiency Vs Output Load(Vin=48V) RTA-2405R30D1WR RTA-2405R30D1WR RTA-4815R30D1WR RTA-4815R30D1WR

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 4 (5) DC/DC-Converter 3W ultra wide input isolated & regulated single output we energize electronics! an acal group company we energize electronics! RTA-R30D1WR RTA-R30D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de R-SERIES Design Reference 1. Typical application All the DC/DC converters of this series are tested according to the recommended circuit (see Fig. 2) before delivery. If it is required to further reduce input and output ripple, properly increase the input & output of additional capacitors Cin and Cout or select capacitors of low equivalent impedance provided that the capacitance is no larger than the max. capacitive load of the product. Vin GND +Vo DCC in DC C out Fig. 2 Vn Cin Cout 24VDC 100µF 10µF 48VDC 10µF ~47µF 10µF 2. EMC solution-recommended circuit Vin G ND +Vo DC/ DC LO A DC3 LD M 1 C1MOV FUSE CY Vin G ND Fig. 3 Notes: Part ① in the Fig. 3 is used for EMS test and part ② for EMI filtering; selected based on needs. Parameter description Model Vin:24V Vin:48V FUSE Choose according to actual input current MOV S14K35 S14K60 C0,C1 330µF/50V 330µF/100V C2,C3 4.7µF/50V 4.7µF/100V C4 Refer to the Cout in Fig.2 LDM1 12µH CY1 1nF/2KV EMC solution-recommended circuit PCB layout Fig. 4 Note: the min. distance of the bonding pads between input & output isolation capacitors (CY1) shall be ≥ 2mm. 3. It is not allowed to connect modules output in parallel to enlarge the power For more information about Mornsun EMC Filter products, please visit rsg-electronic.de to download the Selection Guide of EMC Filter

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 5 (5) DC/DC-Converter 3W ultra wide input isolated & regulated single output we energize electronics! an acal group company we energize electronics! RTA-R30D1WR RTA-R30D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de R-SERIES Dimensions and Recommended Layout Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from rsg-electronic.de. Tube Packing Bag Number : 58010114, Reel Packing Bag Number : 58010115 ; 2. Recommended used in more than 5% load, if the load is lower than 5%, then the ripple index of the product may exceed the specification, but does not affect the reliability of the product; 3. The max. capacitive load should be tested within the input voltage range and under full load conditions; 4. If the product needs to be cleaned after welding, please wait to completely dried before electrical use it; 5. Unless otherwise specified, d ata in this datasheet should be tested under the conditions of Ta= 25℃, humidity<75% when inputting nominal voltage and outputting rated load; 6. All index testing methods in this datasheet are based on our Company\s corporate standards; 7. The performance inde xes of the product models listed in this datasheet are as above, but some indexes of non -standard model products will exceed the above-mentioned requirements, and please directly contact our technicians for specific information; 8. We can provide product customization service; 9. Specifications of this product are subject to changes without prior notice. RTA-R30D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de R-SERIES Dimensions and Recommended Layout Notes: 1. Packing information please refer to Product Packing Information which can be downloaded from rsg-electronic.de. Tube Packing Bag Number : 58010114, Reel Packing Bag Number : 58010115 ; 2. Recommended used in more than 5% load, if the load is lower than 5%, then the ripple index of the product may exceed the specification, but does not affect the reliability of the product; 3. The max. capacitive load should be tested within the input voltage range and under full load conditions; 4. If the product needs to be cleaned after welding, please wait to completely dried before electrical use it; 5. Unless otherwise specified, d ata in this datasheet should be tested under the conditions of Ta= 25℃, humidity<75% when inputting nominal voltage and outputting rated load; 6. All index testing methods in this datasheet are based on our Company\s corporate standards; 7. The performance inde xes of the product models listed in this datasheet are as above, but some indexes of non -standard model products will exceed the above-mentioned requirements, and please directly contact our technicians for specific information; 8. We can provide product customization service; 9. Specifications of this product are subject to changes without prior notice. The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28