RT9-0505RD30D1 RSG | Alldatasheet

Document overview

  • PDF pages: 3

Technical content

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (5) DC/DC-Converter RT9-RD30D1 3W, wide input, isolated & regulated dual output we energize electronics! an acal group company we energize electronics!

  • 2:1 Wide input voltage range
  • Operating temperature: -40°C ~ +85°C
  • 1500VDC isolation
  • No heatsink required
  • Internal SMD construction
  • MTBF>1,000,000 hours
  • Short circuit protection (automatic recovery)
  • Industry standard pinout
  • RoHS Compliance RoHS RT9-R30D1 Series R-SERIES 3W, wide input, isolated & regulated single/dual output DC/DC-converter Ï Patent Protection Ï RoHS PRODUCT PROGRAM

APPLICATIONS

The RT9-RD30D1 & RT9-R30D1 series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range(voltage range d 2:1); 2) Where isolation is necessary between input and output (isolation voltage d1500VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanded. M ODEL SELECTION RT9-0505RD30D1 Part Number Input Output Efficiency (%, Typ.) Voltage (VDC) Voltage (VDC) Current (mA) Nominal Range Max Max. Min. RT9-0505RD30D1 5 4.5-9 11 ±5 ±300 ±30 72 RT9-0515RD30D1 ±15 ±100 ±10 75 RT9-1205RD30D1 12 9-18 22 ±5 ±300 ±30 76 RT9-1212RD30D1 ±12 ±125 ±13 79 RT9-1215RD30D1 ±15 ±100 ±10 79 RT9-2405RD30D1 24 18-36 40 ±5 ±300 ±30 76 RT9-2412RD30D1 ±12 ±125 ±13 79 RT9-2415RD30D1 ±15 ±100 ±10 79 RT9-4812RD30D1 48 36-72 80 ±12 ±125 ±13 79 Note: Input voltage can´t exceed this value, or will cause the permanent damage COMMON SPECIFICATIONS Item Test conditions Min. Typ. Max. Units Storage humidity 95 % Operating temperature -40 85 Storage temperature -55 125 Temp. rise at full load 15 Lead temperature 1.5mm from case for 10 seconds 300 Short circuit protection Continuous, automatic recovery Cooling Free air convection MTBF 1000 k hours Weight 5.2 g Reflow Soldering Temperature ISOLATION SPECIFICATIONS TYPICAL TEMPERATURE CURVE Item Test conditions Min. Typ. Max. Units Temperature Derating Graph Safe Operating Area Output Power Percent (%) -40 0 40 71 85 120 100 120 Isolation voltage Tested for 1 minute and 1mA 1500 VDC Isolation Test at 500VDC 1000 M© Isolation Input/output, 100KHz/1V 1000 pF Ï 2:1 Wide input voltage range Ï Operating temperature: -40°C ~ +85°C Ï 1500VDC isolation Ï No heatsink required Ï Internal SMD construction Ï MTBF>1,000,000 hours Ï Short circuit protection (automatic recovery) Ï Industry standard pinout Ï RoHS Compliance Package Style Rated Power Output Voltage Input Voltage Product Series FEATURES:

Item Test conditions Min. Typ. Max. Units Output power See above products program 0.3 3 W Positive v oltage Refer to recommended ±1 ±3 Negative Refer to recommended ±3 ±5 Load regulation From 10% to 100% load ±0.5 ±1* Line regulation Input v oltage from low to ±0.2 ±0.5 Temperature Refer to recommended ±0.03 %/°C Output ripple & 20MHz Bandwidth 35 100 mVp-p Switching 100% load, nominal input 300 kHz *Dual output models unbalanced load: ±5% . **Test rippl e and noise by parallel cable method. APPLICATION NOTE RECOMMENDED CIRCUIT Requirement On Output Load In order to ensure the product operate efficiently and reliably, in addition to a max load (namely full load), a minimum load is specified for this kind of DC/DC converter. Make sure the specified range of input voltage is not exceeded, the minimum output load no less than 10% load. If the actual load is less than the specified minimum load, the output ripple may increase sharply while its efficiency and reliability will reduce greatly. If the actual output power is very small, please add an appr opriate resistor as extra loading, or contact our company for other lower output power products. Recommended Circuit All the RT9-RD30D1 series have been tested according to the following recommended testing circuit before leaving factory. This series should be tested under load (See Figure 1). If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees (Table 1). General: Cin: 5V&12V 100µF 24V&48V 10µF~47µF Cout: 10µF/100mA Input Current When it is used in unregulated power supply, be sure that the fluctuating range of the power supply and the rippled voltage do not exceed the module standard. Input current of power supply should afford the flash startup average current of this kind of DC/DC module (Figure 2). General: Vin:05V Iave =1334mA Vin:12V Iave =648mA Vin:24V Iave =316mA Vin:48V Iave =158mA No parallel connection or plug and play Vin GND +Vo 0VCin DC DC -Vo (Figure 1) Input Current(A) Input Voltage (V) Input Voltage Range Iave (Figure 2) Output External Capacitor Table(Table 1) Single Vout Cout (µF) Dual Vout (VDC) Cout (µF) 5 1000 ±5 680 12 470 ±12 330 15 330 ±15 220 RT9-R30D1 Series R-SERIES OUTPUT SPECIFICATIONS Item Test conditions Min. Typ. Max. Units Output power See above products program 0.3 3 W Positive v oltage Refer to recommended ±1 ±3 Negative Refer to recommended ±3 ±5 Load regulation From 10% to 100% load ±0.5 ±1* Line regulation Input v oltage from low to ±0.2 ±0.5 Temperature Refer to recommended ±0.03 %/°C Output ripple & 20MHz Bandwidth 35 100 mVp-p Switching 100% load, nominal input 300 kHz *Dual output models unbalanced load: ±5% . **Test rippl e and noise by parallel cable method. APPLICATION NOTE RECOMMENDED CIRCUIT Requirement On Output Load In order to ensure the product operate efficiently and reliably, in addition to a max load (namely full load), a minimum load is specified for this kind of DC/DC converter. Make sure the specified range of input voltage is not exceeded, the minimum output load no less than 10% load. If the actual load is less than the specified minimum load, the output ripple may increase sharply while its efficiency and reliability will reduce greatly. If the actual output power is very small, please add an appr opriate resistor as extra loading, or contact our company for other lower output power products. Recommended Circuit All the RT9-RD30D1 series have been tested according to the following recommended testing circuit before leaving factory. This series should be tested under load (See Figure 1). If you want to further decrease the input/output ripple, you can increase capacitance properly or choose capacitors with low ESR. However, the capacitance of the output filter capacitor must be proper. If the capacitance is too big, a startup problem might arise. For every channel of output, provided the safe and reliable operation is ensured, the greatest capacitance of its filter capacitor sees (Table 1). General: Cin: 5V&12V 100µF 24V&48V 10µF~47µF Cout: 10µF/100mA Input Current When it is used in unregulated power supply, be sure that the fluctuating range of the power supply and the rippled voltage do not exceed the module standard. Input current of power supply should afford the flash startup average current of this kind of DC/DC module (Figure 2). General: Vin:05V Iave =1334mA Vin:12V Iave =648mA Vin:24V Iave =316mA Vin:48V Iave =158mA No parallel connection or plug and play Vin GND +Vo 0VCin DC DC -Vo (Figure 1) Input Current(A) Input Voltage (V) Input Voltage Range Iave (Figure 2) Output External Capacitor Table(Table 1) Single Vout Cout (µF) Dual Vout (VDC) Cout (µF) 5 1000 ±5 680 12 470 ±12 330 15 330 ±15 220 RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (5) DC/DC-Converter RT9-RD30D1 3W, wide input, isolated & regulated dual output we energize electronics! an acal group company we energize electronics! RT9-R30D1 Series R-SERIES 3W, wide input, isolated & regulated single/dual output DC/DC-converter Ï Patent Protection Ï RoHS PRODUCT PROGRAM The RT9-RD30D1 & RT9-R30D1 series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range(voltage range d 2:1); 2) Where isolation is necessary between input and output (isolation voltage d1500VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanded. MODEL SELECTION RT9-0505RD30D1 Part Number Input Output Efficiency (%, Typ.) Voltage (VDC) Voltage (VDC) Current (mA) Nominal Range Max Max. Min. RT9-0505RD30D1 5 4.5-9 11 ±5 ±300 ±30 72 RT9-0515RD30D1 ±15 ±100 ±10 75 RT9-1205RD30D1 12 9-18 22 ±5 ±300 ±30 76 RT9-1212RD30D1 ±12 ±125 ±13 79 RT9-1215RD30D1 ±15 ±100 ±10 79 RT9-2405RD30D1 24 18-36 40 ±5 ±300 ±30 76 RT9-2412RD30D1 ±12 ±125 ±13 79 RT9-2415RD30D1 ±15 ±100 ±10 79 RT9-4812RD30D1 48 36-72 80 ±12 ±125 ±13 79 Note: Input voltage can´t exceed this value, or will cause the permanent damage COMMON SPECIFICATIONS Item Test conditions Min. Typ. Max. Units Storage humidity 95 % Operating temperature -40 85 Storage temperature -55 125 Temp. rise at full load 15 Lead temperature 1.5mm from case for 10 seconds 300 Short circuit protection Continuous, automatic recovery Cooling Free air convection MTBF 1000 k hours Weight 5.2 g Reflow Soldering Temperature ISOLATION SPECIFICATIONS TYPICAL TEMPERATURE CURVE Item Test conditions Min. Typ. Max. Units Temperature Derating Graph Safe Operating Area Output Power Percent (%) -40 0 40 71 85 120 100 120 Isolation voltage Tested for 1 minute and 1mA 1500 VDC Isolation Test at 500VDC 1000 M© Isolation Input/output, 100KHz/1V 1000 pF Ï 2:1 Wide input voltage range Ï Operating temperature: -40°C ~ +85°C Ï 1500VDC isolation Ï No heatsink required Ï Internal SMD construction Ï MTBF>1,000,000 hours Ï Short circuit protection (automatic recovery) Ï Industry standard pinout Ï RoHS Compliance Package Style Rated Power Output Voltage Input Voltage Product Series FEATURES: RT9-R30D1 Series R-SERIES 3W, wide input, isolated & regulated single/dual output DC/DC-converter Ï Patent Protection Ï RoHS PRODUCT PROGRAM The RT9-RD30D1 & RT9-R30D1 series are specially designed for applications where a wide range input voltage power supplies are isolated from the input power supply in a distributed power supply system on a circuit board. These products apply to: 1) Where the voltage of the input power supply is wide range(voltage range d 2:1); 2) Where isolation is necessary between input and output (isolation voltage d1500VDC); 3) Where the regulation of the output voltage and the output ripple noise are demanded. MODEL SELECTION RT9-0505RD30D1 Part Number Input Output Efficiency (%, Typ.) Voltage (VDC) Voltage (VDC) Current (mA) Nominal Range Max Max. Min. RT9-0505RD30D1 5 4.5-9 11 ±5 ±300 ±30 72 RT9-0515RD30D1 ±15 ±100 ±10 75 RT9-1205RD30D1 12 9-18 22 ±5 ±300 ±30 76 RT9-1212RD30D1 ±12 ±125 ±13 79 RT9-1215RD30D1 ±15 ±100 ±10 79 RT9-2405RD30D1 24 18-36 40 ±5 ±300 ±30 76 RT9-2412RD30D1 ±12 ±125 ±13 79 RT9-2415RD30D1 ±15 ±100 ±10 79 RT9-4812RD30D1 48 36-72 80 ±12 ±125 ±13 79 Note: Input voltage can´t exceed this value, or will cause the permanent damage COMMON SPECIFICATIONS Item Test conditions Min. Typ. Max. Units Storage humidity 95 % Operating temperature -40 85 Storage temperature -55 125 Temp. rise at full load 15 Lead temperature 1.5mm from case for 10 seconds 300 Short circuit protection Continuous, automatic recovery Cooling Free air convection MTBF 1000 k hours Weight 5.2 g Reflow Soldering Temperature ISOLATION SPECIFICATIONS TYPICAL TEMPERATURE CURVE Item Test conditions Min. Typ. Max. Units Temperature Derating Graph Safe Operating Area Output Power Percent (%) -40 0 40 71 85 120 100 120 Isolation voltage Tested for 1 minute and 1mA 1500 VDC Isolation Test at 500VDC 1000 M© Isolation Input/output, 100KHz/1V 1000 pF Ï 2:1 Wide input voltage range Ï Operating temperature: -40°C ~ +85°C Ï 1500VDC isolation Ï No heatsink required Ï Internal SMD construction Ï MTBF>1,000,000 hours Ï Short circuit protection (automatic recovery) Ï Industry standard pinout Ï RoHS Compliance Package Style Rated Power Output Voltage Input Voltage Product Series FEATURES: TYPICAL TEMPERATUR CURVE

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (5) DC/DC-Converter RT9-RD30D1 3W, wide input, isolated & regulated dual output we energize electronics! an acal group company we energize electronics! RT9-R30D1 Series R-SERIES OUTLINE DIMENSIONS & PIN CONNECTIONS Note: 1. Packing Information please refer to 'Product Packing Information'. Packing bag number: 58210019; 2. Recommend to use module with more than 10% load, if not, the ripple of the product may exceeds the speci fication, but does not affect the reliability of the product; 3. Operation under 10% load will not damage the converter; However, they may not meet all specification listed. 4. Capacitor MAX load tested at input voltage range and full load. 5. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified. Only typical models listed, other models may be different, please contact our technical person for more details. 6. In this datasheet, all the test methods of indications are based on corporate standards. The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28