RT4-D10D1WR RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (5) RT4-D10D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de 1W, fixed input voltage, isolated & unregulated dual output DC/DC-Converter Ï Patent Protection Ï RoHS RT4-D10D1WR series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for: 1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin); 2. Where isolation between input and output is necessary (isolation voltage ≤1500VDC); 3. Where the output voltage regulation is not strictly required; 4. Typical application: preceding-stage interference isolation condition; ground-interference canceled condition; digit circuit condition; Voltage-isolation converting condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc. Selection Guide Part No. Input Voltage (VDC) Output Efficiency (%,Min./Typ.) @ Full Load Max. Capacitive Load (µF) Nominal (Range) Output Voltage (VDC) Output Current (mA)(Max./Min.) RT4-0305D10D1WR 3.3 (2.97-3.63) ±5 ±100/±10 72/76 100 RT4-0312D10D1WR ±12 ±42/±5 73/77 RT4-0315D10D1WR ±15 ±33/±3 74/78 RT4-0505D10D1WR (4.5-5.5) ±5 ±100/±10 76/80 RT4-0509D10D1WR ±9 ±56/±6 76/80 RT4-0512D10D1WR ±12 ±42/±5 75/79 RT4-0515D10D1WR ±15 ±33/±3 77/81 RT4-0524D10D1WR ±24 ±21/±2 77/81 RT4-1205D10D1WR (10.8-13.2) ±5 ±100/±10 76/80 RT4-1209D10D1WR ±9 ±56/±6 76/80 RT4-1212D10D1WR ±12 ±42/±5 77/81 RT4-1215D10D1WR ±15 ±33/±3 77/81 RT4-1224D10D1WR ±24 ±21/±2 77/81 RT4-1515D10D1WR (13.5-16.5) ±15 ±33/±3 77/81 RT4-2405D10D1WR (21.6-26.4) ±5 ±100/±10 76/80 RT4-2409D10D1WR ±9 ±56/±6 76/80 RT4-2412D10D1WR ±12 ±42/±5 77/81 RT4-2415D10D1WR ±15 ±33/±3 78/82 RT4-2424D10D1WR ±24 ±21/±2 74/80 Note: *The capacitive loads of positive and negative outputs are identical. Ï Operating temperature range: -40℃ to +105℃ Ï High efficiency up to 82% Ï Miniature SMD package Ï Isolation voltage: 1.5K VDC Ï Internal surface mounted design Ï No external component required Ï International standard pin-out FEATURES: DC/DC-Converter RT4-D10D1WR 1W fixed input voltage isolated & un regulated dual output we energize electronics! an acal group company we energize electronics!

  • Operating temperature range: -40°C to +105°C
  • High efficiency up to 82%
  • Miniature SMD package
  • Isolation voltage: 1.5K VDC
  • Internal surface mounted design
  • No external component required
  • International standard pin-out
  • Continuous Short Circuit Protection RT4-D10D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de 1W, fixed input voltage, isolated & unregulated dual output DC/DC-Converter Ï Patent Protection Ï RoHS RT4-D10D1WR series are specially designed for applications where an isolated voltage is required in a distributed power supply system. They are suitable for: 1. Where the voltage of the input power supply is stable (voltage variation: ±10%Vin); 2. Where isolation between input and output is necessary (isolation voltage ≤1500VDC); 3. Where the output voltage regulation is not strictly required; 4. Typical application: preceding-stage interference isolation condition; ground-interference canceled condition; digit circuit condition; Voltage-isolation converting condition; normal low-frequency artificial circuit condition; relay drive circuit condition, etc. Selection Guide Part No. Input Voltage (VDC) Output Efficiency (%,Min./Typ.) @ Full Load Max. Capacitive Load (µF) Nominal (Range) Output Voltage (VDC) Output Current (mA)(Max./Min.) RT4-0305D10D1WR 3.3 (2.97-3.63) ±5 ±100/±10 72/76 100 RT4-0312D10D1WR ±12 ±42/±5 73/77 RT4-0315D10D1WR ±15 ±33/±3 74/78 RT4-0505D10D1WR (4.5-5.5) ±5 ±100/±10 76/80 RT4-0509D10D1WR ±9 ±56/±6 76/80 RT4-0512D10D1WR ±12 ±42/±5 75/79 RT4-0515D10D1WR ±15 ±33/±3 77/81 RT4-0524D10D1WR ±24 ±21/±2 77/81 RT4-1205D10D1WR (10.8-13.2) ±5 ±100/±10 76/80 RT4-1209D10D1WR ±9 ±56/±6 76/80 RT4-1212D10D1WR ±12 ±42/±5 77/81 RT4-1215D10D1WR ±15 ±33/±3 77/81 RT4-1224D10D1WR ±24 ±21/±2 77/81 RT4-1515D10D1WR (13.5-16.5) ±15 ±33/±3 77/81 RT4-2405D10D1WR (21.6-26.4) ±5 ±100/±10 76/80 RT4-2409D10D1WR ±9 ±56/±6 76/80 RT4-2412D10D1WR ±12 ±42/±5 77/81 RT4-2415D10D1WR ±15 ±33/±3 78/82 RT4-2424D10D1WR ±24 ±21/±2 74/80 Note: *The capacitive loads of positive and negative outputs are identical. Ï Operating temperature range: -40℃ to +105℃ Ï High efficiency up to 82% Ï Miniature SMD package Ï Isolation voltage: 1.5K VDC Ï Internal surface mounted design Ï No external component required Ï International standard pin-out FEATURES: RoHS

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 2 (5) RT4-D10D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de Input Specifications Item Operating Conditions Min. Typ. Max. Unit Input Current (full load / no-load) mA 5V input -- 250/20 --/60 12V input -- 104/15 --/50 15V input -- 83/12 --/35 24V input -- 52/10 --30 Reflected Ripple Current -- 15 -- mA Surge Voltage (1sec. max.) 3.3V input -0.7 -- 5 VDC5V input -0.7 -- 9 12V input -0.7 -- 18 15V input -0.7 -- 21 24V input -0.7 -- 30 Input Filter Filter capacitor Hot Plug Unavailable Output Specifications Item Operating Conditions Min. Typ. Max. Unit Output Voltage Accuracy See tolerance envelope curve(Fig. 1) Line Regulation Input voltage change: ±1% -- -- ±1.2 -- Load Regulation 10%-100% load 5VDC output -- 12 -- 9VDC output -- 9 -- 12VDC output -- 8 -- 15VDC output -- 7 -- 24VDC output -- 6 -- Ripple & Noise* 20MHz bandwidth -- 60 150 mVp-p Temperature Coefficient Full load -- -- ±0.03 %/℃ Short Circuit Protection** RT4-24xxD10D1WR/RT4-0524D10D1WR/ RT4-03xxD101WR -- -- 1 s Others Continuous, self-recovery Note: *Ripple and noise are measured by parallel cable method, please see DC-DC Converter Application Notes for specific operation; **Supply voltage must be discontinued at the end of short circuit duration for RT4-524D10D1WR model and RT4-4xxD10D1WR series. General Specifications Item Operating Conditions Min. Typ. Max. Unit Isolation Voltage Input-output, with the test time of 1 minute and the leak current lower than 1mA 1500 -- -- VDC Isolation Resistance Input-output, isolation voltage 500VDC 1000 -- -- M© Isolation Capacitance Input-output, 100KHz/0.1V -- 20 -- pF Operating Temperature Derating when operating temperature up to 100℃, (see Fig. 2) -40 -- 105 ℃Storage Temperature -55 -- 125 Casing Temperature Rise Ta=25℃, nominal input, full load output -- 25 -- Pin Welding Resistance Temperature Welding spot is 1.5mm away from the casing, 10 seconds -- -- 300 Storage Humidity Non-condensing -- -- 95 %RH Reflow Soldering Temperature Peak temp.≤245℃, maximum duration time≤60s at 217℃. For actual application, please refer to IPC/JEDEC J-STD-020D.1. Switching Frequency Full load, nominal input voltage -- 100 -- KHz MTBF MIL-HDFK-217F@25℃ 3500 -- -- K hours DC/DC-Converter RT4-D10D1WR 1W fixed input voltage isolated & un regulated dual output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (5) RT4-D10D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de Physical Specifications Casing Material Epoxy resin (UL94-V0) Dimensions 15.24*11.20*7.25 mm Weight 2.0g (Typ.) Cooling Method Free air convection EMC Specifications EMI RE CISPR22/EN55022 CLASS B (see Fig. 5 for recommended circuit) EMS ESD IEC/EN61000-4-2 C o n t a c t ±6KV perf. Criteria B Product Characteristic Curve -10% 80%20%10% 40% 60% -5% +5% +10% +15% 100% T yp1 Min. Ma x. -7.5% -2.5% +2.5% Output Current Percent(%) (Nominal Input Voltage) Output Voltage ( %)Accur acy T olerance Envelope Curve Fig. 1 Fig. 2 A0505XT-1WR2 100 10 20 30 40 50 60 70 80 90 100 Efficie ncy(% ) Output Current Percentage (% ) E ffi ci ency Vs Output L oad(Vi n=5V) A1205XT-1WR2 100 E fficiency(% ) Input Voltage(V) E ffi ci ency Vs I nput Vol tage (F ul l L oad) A1205XT-1WR2 100 10 20 30 40 50 60 70 80 90 100 E fficiency(% ) Output Current Percentage (% ) Efficiency Vs Output Load(Vin=12V) 100 Efficiency(%) Input Voltage(V) Efficiency Vs Input Voltage (Full Load) RT4-0505D10D1WR RT4-0505D10D1WR RT4-1205D10D1WR RT4-1205D10D1WR DC/DC-Converter RT4-D10D1WR 1W fixed input voltage isolated & un regulated dual output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 4 (5) RT4-D10D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de Design Reference 1. Typical application circuit If it is required to further reduce input and output ripple, a filter capacitor may be connected to the input and output terminals, see Fig.3. Moreover, choosing a suitable filter capacitor is very important, start-up problems may be caused if the capacitance is too large. Under the condition of safe and reliable operation, the recommended capacitive load values are shown in Table 1. The simplest device for output voltage regulation, over-voltage and over-current protection is a linear voltage regulator with overheat protection that is connected to the input or output end in series (see Fig. 4). Vin GND +Vo 0VDCC in DC Cout Cout -Vo Fig.3 Vin GND +Vo DC DC -Vo REG REG REG Fig.4 Recommended capacitive load value table (Table 1) Vin(VDC) Cin(µF) Vo (VDC) Cout(µF) 3.3 4.7 ±5 4.7 5 4.7 ±9 2.2 12 2.2 ±12 1 15 2.2 ±15 1 24 1 ±24 0.47 2. EMC solution-recommended circuit Vin GND +Vo -Vo DC/ DC LO A D LD M Vin GND CY Fig. 4 Input voltage (VDC) 3.3/5/12 15/24 EMI C1 4.7µF /50V C2 Refer to the Cout in Fig.3 LDM 6.8µH CY -- 1nF /2KV Note: 1. 24V input series, 24V output series is subject to CY (CY : 1nF/2KV). 2. It is not needed to add the component in the peripheral circuit when parameter with the symbol of "--". 3. Output load requirements W h e n u s i n g , t h e m i n i m u m l o a d o f t h e m o d u l e o u t p u t s h o u l d n o t b e l e s s t h a n 1 0 % o f t h e n o m i n a l l o a d . I n o rder to meet the performance parameters of this datasheet, please connect a 10% dummy load in parallel at the output end, the dummy load is generally a re sistor, Please note that the resistor needs to be used in derating. For more information please find DC-DC converter application notes on rsg-electronic.de DC/DC-Converter RT4-D10D1WR 1W fixed input voltage isolated & un regulated dual output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 5 (5) RT4-D10D1WR Series RSG Electronic Components • Sprendlinger Ldstr. 115 • 63069 Offenbach • phone: +49 69/984047-0 • info@rsg-electronic.de Dimensions and Recommended Layout 2EXT1WAR201-A0 Note: Grid 2.54*2.54mm Note: Unit: mm[inch] Pin section tolerances: ±0.10[±0 .004] General tolerances: ±0.25[±0.010 ] NC: No Connection A 7.25 [0.285] 7.00 [0.276] 0.88 [0.035] 1 5 710 0~5° 0.25 [0.010]42 8.30 [0.327] Top View Front View Right View 1 5 710 2 4 FunctionPin Pin-Out Top View -Vo5 Vin2 GND +Vo NC 1.00 [0.039] 2.54 [0.100] 2.10 [0.083] 12.20 [0.480] 0.60 [0.024] 2.54 [0.100] 10.16 [0.400] 10.16 [0.400] A 0.10 THIRD ANGLE PROJECTION DC/DC-Converter RT4-D10D1WR 1W fixed input voltage isolated & un regulated dual output we energize electronics! an acal group company we energize electronics! DIMENSIONS and recommended layout The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28