RSP-500

RSP-500 MEANWELL | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

RSP-500-15RSP-500-12 RSP-500-24 RSP-500-27 RSP-500-48RSP-500-5RSP-500-4RSP-500-3.3MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER RIPPLE & NOISE (max.) Note.2 OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE Note.4 FREQUENCY RANGE POWER FACTOR (Typ.) EFFICIENCY (Typ.)INPUT ENVIRONMENT INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER TEMPERATURE SAFETY STANDARDS SAFETY & EMC (Note 4) WITHSTAND VOLTAGE ISOLATION RESISTANCE WORKING TEMP. REMOTE CONTROL REMOTE SENSE FAN CONTROL (Typ.) WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MTBF DIMENSIONOTHERS NOTE PACKING OVERLOAD OVER VOLTAGEPROTECTION FUNCTION 15V12V 24V 27V 48V5V4V3.3V 33.4A41.7A 21A 18.6A 10.5A90A90A90A 0 ~ 33.4A0 ~ 41.7A 0 ~ 21A 0 ~ 18.6A 0 ~ 10.5A0 ~ 90A0 ~ 90A0 ~ 90A 501W500.4W 504W 502.2W 504W450W360W297W 150mVp-p150mVp-p 150mVp-p 150mVp-p 150mVp-p150mVp-p120mVp-p120mVp-p 1500ms, 80ms/230VAC 3000ms, 80ms/115VAC at full load 18ms/230VAC 14ms/115VAC at full load 85 ~ 264VAC 120 ~ 370VDC 47 ~ 63Hz PF>0.95/230VAC PF>0.98/115VAC at full load 20A/115VAC 40A/230VAC <2mA / 240VAC 105 ~ 130% rated output power Protection type : , recovers automatically after fault condition is removedConstant current limiting Protection type : Shut down o/p voltage, re-power on to recover Shut down o/p voltage, recovers automatically after temperature goes down UL60950-1, TUV EN60950-1 approved Compliance to EN55032 (CISPR32) Class B, EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2, EN61204-3 heavy industry level, criteria A I/P-O/P:3KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH -30 ~ +70℃ (Refer to "Derating Curve") POWER ON:open or 0~0.8VDC between RC+(Pin 4)&RC-(Pin3) on CN100 Compensate voltage drop on the load wiring up to 0.3V RTH2≧50℃±10℃Fan on ; RTH2≦40℃±10℃ Fan off (Fan always on for 3.3~5V,Fan ON/OFF control for 12~48V) 20 ~ 90% RH non-condensing ±0.03%/℃ (0 ~ 50℃) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 187.7K hrs min. MIL-HDBK-217F (25℃ ) 1.3Kg; 9pcs/12.7Kg/0.7CUFT EMC IMMUNITY EMC EMISSION RSP-500 seri es500W Single Output with PFC Function File Name:RSP-500-SPEC 2017-07-14 Bauar Sicherheit egel gema t gepruft od be www. ID 2000000000 tuv.com wac g o s POWER OFF: 4~10VDC between RC+(Pin 4)&RC-(Pin3) on CN100

USP- 2 2 5 s e riesUSP- 2 2 5 s e riesSP- 3 2 0 s e ries Mechanical Specification Case No.226A Unit:mm 500W Single Output with PFC Function Block Diagram Derating Curve Static Characteristics AMBIENT TEMPERATURE (℃) INPUT VOLTAGE (VAC) 60Hz 9085 95 100 115 135 155 175 195 230 264 LOAD (%) LOAD (%) 10 20 30 40 50 60 70 100 -30 0 (HORIZONTAL) fosc : 70KHz PWM & PFC CIRCUIT DETECTIONO.L.P. O.T.P. EMI FILTER POWER SWITCHING FILTERPFC RECTIFIERSRECTIFIERS +V RC+ RC- I/P FG CONTROL O.T.P. O.V.P. INRUSH CURRENT ACTIVE LIMITING FANFAN CONTROL ON/OFF Air flow direction LED 1 3 2 4 +V ADJ. SVR1 CN100 TB1 TB2 230 40 170 4-M4(Both Sides) L=5mm6.5 6.5 2.5 39.3 159.7 RSP-500 seri es 100 HRS DF11-04DP-2DS or equivalent Connector Pin No. Assignment (CN100) : Pin No. Assignment Mating Housing HRS DF11-4DS or equivalent Terminal HRS DF11-**SC or equivalent RC+ RC- AC Input Terminal Pin No. Assignment (TB1) Pin No. Assignment FG AC/N AC/L DC Output Terminal Pin No. Assignment (TB2) Pin No. 1~3 4~6 Assignment DC OUTPUT -V DC OUTPUT +V 147 11 9.29.5 8.2 19 89 127 5-M4 L=4mm 6.913.3 12.5 18 40.5 File Name:RSP-500-SPEC 2017-07-14

The PSU can be turned ON/OFF by using the "Remote Control" function. The remote sensing compensates voltage drop on the load wiring up to 0.3V Function Description of CN100 Function Manual 1.Remote Control 2.Remote Sense Pin No. Function Description RC+ Turns the output on and off by electrical or dry contact between pin 4 ( RC+) and pin 3 (RC-). 0~0.8VDC or open: Power ON, 4~10VDC: Power OFF. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.3V. Between RC-(pin3) and RC+(pin4) on CN100 SW OFF (0 ~ 0.8VDC) or open SW ON (4 ~ 10V) PSU Status ON OFF 3 RC- Return for RC+ signal input. 2 +S Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.3V. +V -V RC- -S +S 3 4 1 2 RC+ RC- -S +S 3 4 1 2 RC+ +V -V USP- 2 2 5 s e riesUSP- 2 2 5 s e riesSP- 3 2 0 s e ries500W Single Output with PFC Function RSP-500 seri es LED 1 3 2 4 +V ADJ. SVR1 CN100 TB1TB2 SW LOAD I=6~20mAExternal Power Source LED 1 3 2 4 +V ADJ. SVR1 CN100 TB1TB2 LOAD Sense lines should be twisted in pairs CN100 (pin1) (pin2) CN100 File Name:RSP-500-SPEC 2017-07-14