RSP-1000-24

RSP-1000 TOTAL-POWER | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

OUTPUT VOLTAGE ADJ. RANGE LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE Note.5 FREQUENCY RANGE EFFICIENCY (Typ.)INPUT FUNCTION INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVER TEMPERATURE WORKING TEMP. CURRENT SHARING(CS) Note.7 OUTPUT VOLTAGE TRIM Note.6 DC OK SIGNAL REMOTE ON/OFF CONTROL Note.6 AUXILIARY POWER(AUX) WORKING HUMIDITY STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION MTBF DIMENSIONOTHERS NOTE PACKING OVERLOAD OVER VOLTAGE AC CURRENT (Typ.) 300ms, 50ms at full load 16ms/230VAC 16ms/115VAC at full load 90 ~ 264VAC 127 ~ 370VDC 47 ~ 63Hz 12A/115VAC 6A/230VAC 25A/115VAC 40A/230VAC <2.0mA / 240VAC 105 ~ 125% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed Protection type : Shut down o/p voltage, re-power on to recover 85 5 (TSW2 ) detect on heatsink of O/P diode; 7 5 5 (TSW1 ) detect on heatsink of power transistor Protection type : Shut down o/p voltage, recovers automatically after temperature goes down -20 ~ +60 (Refer to output load derating curve) Power on : short between on/off(pin6) & -S(pin2) on CN50 Power off : open between on/off(pin6) & -S(pin2) on CN50 The TTL signal out, PSU turn on = 3.3 ~ 5.6V ; PSU turn of f=0~1 V Adjustment of output voltage is possible between 40 ~ 110% of rated output Please refer to function manual 20 ~ 90% RH non-condensing 0.02%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes 35K hrs min. MIL-HDBK-217F (25 ) 295*127*41mm (L*W*H) 1.95Kg; 6pcs/12.7Kg/0.99CUFT 150mVp-p 10 ~ 13.5V 150mVp-p 13.5 ~ 16.5V 150mVp-p 20 ~ 26.4V 150mVp-p 24 ~ 30V 150mVp-p 43 ~ 55V 12V 60A 0 ~ 60A 720W 15V 50A 0 ~ 50A 750W 24V 40A 0 ~ 40A 960W 27V 37A 0 ~ 37A 999W 48V 21A 0 ~ 21A 1008W RSP-1000-12 RSP-1000-15 RSP-1000-24 RSP-1000-27 RSP-1000-48 /c49/c46/c32/c65/c108/c108/c32/c112/c97/c114/c97/c109/c101/c116/c101/c114/c115/c32/c78/c79/c84/c32/c115/c112/c101/c99/c105/c97/c108/c108/c121/c32/c109/c101/c110/c116/c105/c111/c110/c101/c100/c32/c97/c114/c101/c32/c109/c101/c97/c115/c117/c114/c101/c100/c32/c97/c116/c32/c50/c51/c48/c86/c65/c67/c32/c105/c110/c112/c117/c116/c44/c32/c114/c97/c116/c101/c100/c32/c108/c111/c97/c100/c32/c97/c110/c100/c32/c50/c53 /c111/c102/c32/c97/c109/c98/c105/c101/c110/c116/c32/c116/c101/c109/c112/c101/c114/c97/c116/c117/c114/c101/c46 /c50/c46/c32/c82/c105/c112/c112/c108/c101/c32/c38/c32/c110/c111/c105/c115/c101/c32/c97/c114/c101/c32/c109/c101/c97/c115/c117/c114/c101/c100/c32/c97/c116/c32/c50/c48/c77/c72/c122/c32/c111/c102/c32/c98/c97/c110/c100/c119/c105/c100/c116/c104/c32/c98/c121/c32/c117/c115/c105/c110/c103/c32/c97/c32/c49/c50/c34/c32/c116/c119/c105/c115/c116/c101/c100/c32/c112/c97/c105/c114/c45/c119/c105/c114/c101/c32/c116/c101/c114/c109/c105/c110/c97/c116/c101/c100/c32/c119/c105/c116/c104/c32/c97/c32/c48/c46/c49/c117/c102/c32/c38/c32/c52/c55/c117/c102/c32/c112/c97/c114/c97/c108/c108/c101/c108/c32/c99/c97/c112/c97/c99/c105/c116/c111/c114/c46 /c51/c46/c32/c84/c111/c108/c101/c114/c97/c110/c99/c101/c32/c58/c32/c105/c110/c99/c108/c117/c100/c101/c115/c32/c115/c101/c116/c32/c117/c112/c32/c116/c111/c108/c101/c114/c97/c110/c99/c101/c44/c32/c108/c105/c110/c101/c32/c114/c101/c103/c117/c108/c97/c116/c105/c111/c110/c32/c97/c110/c100/c32/c108/c111/c97/c100/c32/c114/c101/c103/c117/c108/c97/c116/c105/c111/c110/c46 /c52/c46/c32/c84/c104/c101/c32/c112/c111/c119/c101/c114/c32/c115/c117/c112/c112/c108/c121/c32/c105/c115/c32/c99/c111/c110/c115/c105/c100/c101/c114/c101/c100/c32/c97/c32/c99/c111/c109/c112/c111/c110/c101/c110/c116/c32/c119/c104/c105/c99/c104/c32/c119/c105/c108/c108/c32/c98/c101/c32/c105/c110/c115/c116/c97/c108/c108/c101/c100/c32/c105/c110/c116/c111/c32/c97/c32/c102/c105/c110/c97/c108/c32/c101/c113/c117/c105/c112/c109/c101/c110/c116/c46/c32/c84/c104/c101/c32/c102/c105/c110/c97/c108/c32/c101/c113/c117/c105/c112/c109/c101/c110/c116/c32/c109/c117/c115/c116/c98/c101/c32/c114/c101/c45/c99/c111/c110/c102/c105/c114/c109/c101/c100/c32/c116/c104/c97/c116/c32/c105/c116/c32/c115/c116/c105/c108/c108/c32/c109/c101/c101/c116/c115 /c69/c77/c67/c32/c100/c105/c114/c101/c99/c116/c105/c118/c101/c115/c46 /c53/c46/c32/c68/c101/c114/c97/c116/c105/c110/c103/c32/c109/c97/c121/c32/c98/c101/c32/c110/c101/c101/c100/c101/c100/c32/c117/c110/c100/c101/c114/c32/c108/c111/c119/c32/c105/c110/c112/c117/c116/c32/c118/c111/c108/c116/c97/c103/c101/c115/c46/c32/c80/c108/c101/c97/c115/c101/c32/c99/c104/c101/c99/c107/c32/c116/c104/c101/c32/c100/c101/c114/c97/c116/c105/c110/c103/c32/c99/c117/c114/c118/c101/c32/c102/c111/c114/c32/c109/c111/c114/c101/c32/c100/c101/c116/c97/c105/c108/c115/c46 /c54/c46/c32/c84/c104/c101/c32/c112/c111/c119/c101/c114/c32/c115/c117/c112/c112/c108/c121/c32/c117/c110/c105/c116/c32/c119/c105/c108/c108/c32/c104/c97/c118/c101/c32/c110/c111/c32/c111/c117/c116/c112/c117/c116/c32/c105/c102/c32/c116/c104/c101/c32/c115/c104/c111/c114/c116/c105/c110/c103/c32/c99/c111/c110/c110/c101/c99/c116/c111/c114/c32/c105/c115/c32/c110/c111/c116/c32/c97/c115/c115/c101/c109/c98/c108/c101/c100/c46/c32/c73/c116/c32/c99/c111/c110/c116/c97/c105/c110/c115/c32/c116/c119/c111/c32/c115/c104/c111/c114/c116/c105/c110/c103/c32/c119/c105/c114/c101/c115/c58/c32/c111/c110/c101/c32/c105/c115/c32/c102/c114/c111/c109/c32/c111/c110/c47/c111/c102/c102/c40/c112/c105/c110/c54/c41/c116/c111/c32/c45/c115/c40/c112/c105/c110/c50/c41 /c97/c110/c100/c32/c116/c104/c101/c32/c111/c116/c104/c101/c114/c32/c105/c115/c32/c102/c114/c111/c109/c32/c86/c99/c111/c40/c112/c105/c110/c56/c41/c32/c116/c111/c32/c86/c99/c97/c40/c112/c105/c110/c49/c48/c41/c46/c32/c80/c108/c101/c97/c115/c101/c32/c114/c101/c102/c116/c101/c114/c32/c116/c111/c32/c102/c117/c110/c99/c116/c105/c111/c110/c32/c109/c97/c110/c117/c97/c108/c32/c102/c111/c114/c32/c100/c101/c116/c97/c105/c108/c115/c46 /c55/c46/c32/c32/c73/c110/c32/c112/c97/c114/c97/c108/c108/c101/c108/c32/c99/c111/c110/c110/c101/c99/c116/c105/c111/c110/c44/c32/c109/c97/c121/c98/c101/c32/c111/c110/c108/c121/c32/c111/c110/c101/c117/c110/c105/c116/c32/c111/c112/c101/c114/c97/c116/c101/c32/c105/c102/c32/c116/c104/c101/c32/c116/c111/c116/c97/c108/c32/c111/c117/c116/c112/c117/c116/c32/c108/c111/c97/c100/c32/c105/c115/c32/c108/c101/c115/c115/c32/c116/c104/c97/c110/c32/c53/c37/c32/c111/c102/c32/c114/c97/c116/c101/c100/c32/c108/c111/c97/c100/c32/c99/c111/c110/c100/c105/c116/c105/c111/c110/c46 /c56/c46/c32/c80/c108/c101/c97/c115/c101/c32/c99/c111/c110/c115/c117/c108/c116/c32/c77/c69/c65/c78/c32/c87/c69/c76/c76/c32/c102/c111/c114/c32/c97/c112/c112/c108/c105/c99/c97/c116/c105/c111/c110/c115/c32/c111/c102/c32/c109/c111/c114/c101/c32/c117/c110/c105/c116/c115/c32/c99/c111/c110/c110/c101/c99/c116/c105/c110/c103/c32/c105/c110/c32/c112/c97/c114/c97/c108/c108/c101/c108/c46 POWER FACTOR (Typ.) 0.95/230VAC 0.98/115VAC at full load SAFETY STANDARDS HARMONIC CURRENT EMS IMMUNITY UL60950-1, TUV EN60950-1 approved Compliance to EN55022 (CISPR22) Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A 1000W Single Output Power Supply RSP-1000 series RIPPLE & NOISE (max.) Note.2 VOLTAGE TOLERANCE Note.3 EMI CONDUCTION & RADIATION WITHSTAND VOLTAGE ISOLATION RESISTANCE I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC ENVIRONMENT SAFETY & EMC (Note 4) PROTECTION /c85/c110/c105/c118/c101/c114/c115/c97/c108/c32/c65/c67/c32/c105/c110/c112/c117/c116/c32/c47/c32/c70/c117/c108/c108/c32/c114/c97/c110/c103/c101 /c65/c67/c32/c105/c110/c112/c117/c116/c32/c97/c99/c116/c105/c118/c101/c32/c115/c117/c114/c103/c101/c32/c99/c117/c114/c114/c101/c110/c116/c32/c108/c105/c109/c105/c116/c105/c110/c103 /c66/c117/c105/c108/c116/c45/c105/c110/c32/c53/c86/c47/c48/c46/c53/c65/c32/c97/c117/c120/c105/c108/c105/c97/c114/c121/c32/c112/c111/c119/c101/c114 /c66/c117/c105/c108/c116/c45/c105/c110/c32/c97/c99/c116/c105/c118/c101/c32/c80/c70/c67/c32/c102/c117/c110/c99/c116/c105/c111/c110/c44/c32/c80/c70/c62/c48/c46/c57/c53 /c80/c114/c111/c116/c101/c99/c116/c105/c111/c110/c115/c58/c32/c83/c104/c111/c114/c116/c32/c99/c105/c114/c99/c117/c105/c116/c32/c47/c32/c79/c118/c101/c114/c108/c111/c97/c100/c32/c47/c32/c79/c118/c101/c114/c32/c118/c111/c108/c116/c97/c103/c101/c32/c47/c32/c79/c118/c101/c114/c32/c116/c101/c109/c112/c101/c114/c97/c116/c117/c114/c101 /c79/c117/c116/c112/c117/c116/c32/c118/c111/c108/c116/c97/c103/c101/c32/c99/c97/c110/c32/c98/c101/c32/c116/c114/c105/c109/c109/c101/c100/c32/c98/c101/c116/c119/c101/c101/c110/c32/c52/c48/c32/c126/c32/c49/c49/c48/c37/c32/c111/c102/c32/c116/c104/c101/c32/c114/c97/c116/c101/c100/c32/c111/c117/c116/c112/c117/c116/c32/c118/c111/c108/c116/c97/c103/c101 /c70/c111/c114/c99/c101/c100/c32/c97/c105/c114/c32/c99/c111/c111/c108/c105/c110/c103/c32/c98/c121/c32/c98/c117/c105/c108/c116/c45/c105/c110/c32/c68/c67/c32/c102/c97/c110 /c65/c99/c116/c105/c118/c101/c32/c99/c117/c114/c114/c101/c110/c116/c32/c115/c104/c97/c114/c105/c110/c103/c32/c117/c112/c32/c116/c111/c32/c52/c48/c48/c48/c87/c40/c51/c43/c49/c41 /c68/c67/c32/c79/c75/c32/c83/c105/c103/c110/c97/c108 /c66/c117/c105/c108/c116/c45/c105/c110/c32/c114/c101/c109/c111/c116/c101/c32/c79/c78/c45/c79/c70/c70/c32/c99/c111/c110/c116/c114/c111/c108 /c66/c117/c105/c108/c116/c45/c105/c110/c32/c114/c101/c109/c111/c116/c101/c32/c115/c101/c110/c115/c101/c32/c102/c117/c110/c99/c116/c105/c111/c110 /c51/c32/c121/c101/c97/c114/c115/c32/c119/c97/c114/c114/c97/c110/c116/c121 /c40/c78/c111/c116/c101/c46/c56/c41 /c72/c105/c103/c104/c32/c112/c111/c119/c101/c114/c32/c100/c101/c110/c115/c105/c116/c121/c32/c49/c48/c46/c55/c119/c47/c105/c110/c99/c104 /c49/c85/c32/c108/c111/c119/c32/c112/c114/c111/c102/c105/c108/c101/c32/c52/c49/c109/c109 /c51 /c70/c101/c97/c116/c117/c114/c101/c115/c32/c58

Derating Curve Static Characteristics Case No. 952B Unit:mm LOAD (%) INPUT VOLTAGE (VAC) 60Hz 90 95 100 115 264 100 Block Diagram AMBIENT TEMPERATURE ( ) LOAD (%)20 100 - 2 001 02 03 04 05 06 07 0 Ta=25 P F Cf o s c:1 1 0 K H z PWM fosc : 90KHz AC Input Terminal Pin No. Assignment Pin No. Assignment FG AC/L AC/N TB1 20.5 Air flow direction 127 18.5 3-M4 L=4 277.7 25.4 7.8 21 34.5 295 277.7 25.4 7.86 20.5 Control Pi (CN50) :n No. Assignment HRS DF11-12DP-2DS or equivalent Pin No.Pin No.Pin No. 951 106 11,127 AssignmentAssignmentAssignment VciDC-OK+S Vca GND CS ON/OFF Vco G-AUX 5V-AUX Mating Housing HRS DF11-12DS or equivalent Terminal HRS DF11-**SC or equivalent CN50 SVR51 3-M4 L=6 3-M4 L=6 PFC FILTER RECTIFIERS AUX POWER(5V/0.5A) PFC CONTROL O.L.P. AUX GND SHARE CURRENT CURRENT V_TRIM DC OK SHARE O.V.P. ON/OFF RECTIFIERS CONTROL ON/OFF FAN LIMITING ACTIVE CURRENT INRUSH CONTROL I/P -V +VRECTIFIERS FILTERSWITCHING POWERRECTIFIERS FILTER EMI PWM CIRCUIT DETECTION POWER AUX 1000W Single Output Power Supply RSP-1000 series Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com (HORIZONTAL) , () p

Fig 1.1 LOAD SVR51 CN50 11 1 21 2 -V+V The power supply unit will have no output if the shorting connector (accessory comes along with the PSU) is not assembled. It contains two shorting wires : one is from ON/OFF (pin6) to -S (pin2) and the other is from Vco (pin8) to Vca (pin10). AUXG AUX DC_OK ON/OFF CS CN50 (Shorting connector) Vco Vci Vca GND GND 1000W Single Output Power Supply RSP-1000 series Function Description of CN50 Function Manual 1."Remote ON/OFF" and "Output voltage trim" functions are not used. Pin No. Function Description 11,12 5V-AUX DC_OK CS Vco Vca GND G-AUX ON/OFF Vci diodes and is not controlled by the "remote ON/OFF control". Open collector signal, referenced to pin11,12(GND). Low when PSU turns on. The maximum sink current is 10mA and the maximum external voltage is 5.6V. Current sharing signal. When units are connected in parallel, the CS pins of the units should be connected to allow current balance between units. Short connecting between Vco (pin8) and Vca (pin10) if output voltage trim function is not used. Connect to external resistor (1/8W) for output voltage triming. Output voltage can be trimmed between 40 ~ 110% of the rated output voltage. Please refer to function manual for details. These pins connect to the negative terminal (-V). Return for DC_OK Signal output. Turns the output on and off by electrical or dry contact between pi n 6 ( ON/OFF) and pin 2 (-S). Short: Power ON, Open: Power OFF. Connect to external DC voltage source for output voltage triming, referenced to pin 2 (-S). Output voltage can be trimmed between 40 ~ 110% of the rated output voltage. Negative sensing. The -S signal should be connected to the negative terminal of the load. The -S and +S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Positive sensing. The +S signal should be connected to the positive terminal of the load. The +S and -S leads should be twisted in pair to minimize noise pick-up effect. The maximum line drop compensation is 0.5V. Auxiliary voltage output ground. The signal return is isolated from the output terminals (+V & -V). Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com

1000W Single Output Power Supply RSP-1000 series The remote sensing compensates voltage drop on the load wiring up to 0.5V. Fig 4.1 -V+V TB1CN50SVR51 LOAD -S (pin2) Sense lines should be twisted in pairs+S (pin1) 4.Remote Sense Fig 3.1 CN50 11 1 21 2 11 1 21 2 -V+V TB1SVR51 3.DC_OK signal "DC_OK" is an open collector signal. It indicates the output status of the PSU. It can operate in two ways : One is sinking current from external TTL signal ; the other is sending out a TTL voltage signal. The maximum sink current is 10mA and the maximum external voltage is 5.6V. 3-1 Sink current : 3-2 TTL voltage signal : Between DC- OK(pin5) and GND(pin11&12) Between ON/OFF(pin6) and -S(pin2) 0~1 V SW ON (Short) 3.3 ~ 5.6V SW OFF (Open) Output Status Output Status ON ON OFF OFF 2.Remote ON/OFF TB1 Fig 2.1 LOAD SVR51 CN50 11 1 21 2 SW -V+V The PSU can be turned ON/OFF by using the "Remote ON/OFF" function AUXG AUXG AUXG AUX AUX AUX DC_OK DC_OK DC_OK ON/OFF ON/OFF ON/OFF CS CS CS CN50 CN50 CN50 Vco Vco Vco Vci Vci Vci Vca Vca Vca GND GND GND GND GND GND Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com

(1)Using external voltage source between "Vci"(pin9) and "-S"(pin2) that is shown in Fig5.1 Output voltage of RSP-1000 can be trimmed between 40% ~ 110% of its rated value by the following methods : (2)Connecting a resistor externally that in shown in Fig 5.2 & Fig 5.3 (A) O/P voltage goes down (B)O/P voltage goes up EXTERNAL VOLTAGE (VDC) EXTERNAL RESISTOR ( ) EXTERNAL RESISTOR ( ) 390 560 open 820 1K2 18K 2K2 4K7 7K5 open Vci(Referenced to -S) R1, 1/8W(Typ.) R2, 1/8W(Typ.) 100 110 120 100 Vout Vout Vout OVP 120%(Typ.) OVP 120%(Typ.) Non-Linear80 Non-Linear Non-Linear 105 100 TB1SVR51 -V+V AUXG AUXG AUX AUX DC_OK ON/OFF DC_OK ON/OFF CS CS CN50 CN50 Vco Vco Vci Vci Vca Vca GND GND GND GND 5.Output Voltage TRIM OUTPUT VOLTAGE (%)OUTPUT VOLTAGE (%)OUTPUT VOLTAGE (%) CN50 11 1 21 2 Fig 5.1 Fig 5.2 Fig 5.3 External Voltage AUXG AUX DC_OK ON/OFF CS CN50 Vco Vci Vca GND GND 1000W Single Output Power Supply RSP-1000 series Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com

6.Current Sharing with Remote Sensing RSP-1000 has the built-in active current sharing function and can be connected in parallel to provide higher output power : (1)Parallel operation is available by connecting the units shown as below. (+S,-S and CS are connected mutually in parallel). (2)Difference of output voltages among parallel units should be less than 2%. (3)The total output current must not exceed the value determined by the following equation. (4)In parallel operation 4 units is the maximum, please consult the manufacturer for applications of more connecting in parallel. (5)The power supplies should be paralleled using short and large diameter wiring and then connected to the load. (output current at parallel operation)=(Rated current per unit) (Number of unit) 0.9 Note : In parallel connection, maybe only one unit (master) operate if the total output load is less than 5% of rated load condition. The other PSUs (slaves) may go into standby mode and their output LEDs will not turn on. +S+S+S+S -S-S-S-S AUXGAUXGAUXGAUXG AUXAUXAUXAUX DC_OKDC_OKDC_OKDC_OK ON/OFFON/OFFON/OFFON/OFF CSCSCSCS VcoVcoVcoVco VciVciVciVci VcaVcaVcaVca GNDGNDGNDGND GNDGNDGNDGND PSU PSU PSU PSU -V Sense lines should be twisted in pairs SVR51 SVR51 SVR51 SVR51 LOAD CN50 CN50 CN50 CN50TB1 TB1 TB1 TB1+V +V +V +V-V -V -V -V 11 1 21 2 11 1 21 2 11 1 21 2 11 1 21 2 1111 11111111 CN50CN50CN50CN50 Fig 6.1 CS(pin7) +S(pin1) -S(pin2) 2222 12121212 1000W Single Output Power Supply RSP-1000 series Authorized Distributor: Total Power International, Inc. Toll Free: 877-646-0900(US) PH# 978-453-7272 www.total-power.com