RSFAL TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen For surface mounted application /cuspopen Glass passivated junction chip /cuspopen High temperature metallurgically bonded c o n s t r u c t i o n /cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-O /cuspopen Fast switching for high efficiency /cuspopen High temperature soldering: 2 6 0 ℃/ 10 seconds at terminals Mechanical Data /cuspopen Cases: Sub SMA plastic case /cuspopen Terminals: Solder plated /cuspopen Polarity: Indicated by cathode band /cuspopen Packing: 12mm tape per E1A STD RS-481 /cuspopen Weight: 15mg Sub SMA Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25 ℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol RSF AL RSF BL RSF DL RSF GL RSF JL RSF KL RSF ML Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Marking Code ( Note 4 ) FALYM FBLYM FDLYM FGLYM FJLYM FKLYM FMLYM Maximum Average Forward Rectified Current See Fig. 1 @T L=55OC I(AV) 0.5 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 10 A Max. Full Load Reverse Current, Full cycle Average T A =55℃ IR 30 uA Maximum Instantaneous Forward Voltage @ 0.5A VF 1.3 V Maximum DC Reverse Current @ T A =25℃ at Rated DC Blocking Voltage @ T A=125℃ IR 5 uA uA Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 500 nS Typical Junction Capacitance ( Note 2 ) Cj 4.0 pF Typical Thermal Resistance (Note 3) RθJA RθJL 150 ℃/W ℃/W Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: I F=0.5A, I R=1.0A, I RR=0.25A 2. Measured at 1 MHz and Applied V R=4.0 Volts 4. FALYM: F=0.5A, A=50V, L-Low Profile, Y-Year Code, M-Month Code.
- 385 - FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG INSTANTANEOUS FOR WARD CURRENT . (A) 0.1 0.01 FORWARD VOLTAGE. (V) Pulse Width=300 s 1% Duty Cycle Tj=25 C0 RATINGS AND CHARACTERISTIC CURVES (RSFAL THRU RSFML) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 0 20 40 60 80 100 120 140 160 180 0.6 0.5 0.4 0.3 0.2 0.1 LEAD TEMPERATURE. ( C) o RESISTIVE OR INDUCTIVE LOAD (5.0X5.0mm) COPPER PAD AREAS FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz TL=90 C 8.3ms Single Half Sine Wave JEDEC Method O FIG.4- TYPICAL REVERSE CHARACTERISTICS 0 20 40 60 100 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 0.001 0.1 0.01 Tj=25 C0 Tj=100 C0 FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 1 10 100 REVERSE VOLTAGE. (V) INSTANTANEOUS REVERSE CURRENT .( A ) Tj=25 C f=1.0MHz Vsig=50mVp-p