RS601 MOSPEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 6.0 Ampere
FEATURES
＊Low cost ＊High forward surge current capability ＊Ideal for printed circuit board ＊High temperature soldering guaranteed: 260oc/10 second,0.375”(9.5mm)lead length at 5 lbs. (2.3kg) tension. MECHANICAL DATA ＊Case: Transfer molded plastic ＊Epoxy: UL94V-O rate flame retardant ＊Terminals：Lead Solderable Per MIL-STD-202E method 208C ＊Polarity：Polarity symbols marked on case ＊Mounting :Thru hole for #6 screw, 5 in,-lbs.Torqute Max. ＊Weight： 0.27 ounce, 7.59 gram MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Characteristic Symbol RS601 RS602 RS603 RS604 RS605 RS606 RS607 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VDC 50 100 200 400 600 800 1000 V RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V TC=100℃ 6.0 Average Rectifier Forward Current at TA=40℃(Note 3) IO(AV) 6.0 A Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load IFSM 150 A Forward Voltage (per element) ( IF =6.0 Amp) VFM 1.0 V TA = 25℃ 10 uA Peak Reverse Current at rated DC blocking voltage per element TA = 100℃ IR 1.0 mA I2 t Rating for Fusing( t<8.3ms) I2t 93 A2s Typical Junction Capacitance per element (Note1) CJ 105 pF Typical Thermal Resistance (per leg)(note 2) Rθ jc 4.7 oC/W Operating and Storage Temperature Range TJ , Tstg -65 to +150 ℃
FIG-1 FORWARD CURRENT DERATING CURVE FIG-2 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) NSTANTANEOUS FORWARD CURRENT (Amp.) CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) Ambient Temperature P.C.B Mounting Copper Pads 0.375”(9.5mm) Lead Length TC TA Heat Sink Mounting (6.5×6.5×0.15 cm AL Plate Single phase Half Wave 60 Hz Resistive or Inducttive Load TJ=25OC Pulse Width=300us 1% Duty Cycle FIG-3 PEAK FORWARD SURGE CURRENT FIG-4 TYPICAL JUNCTION CAPACITANCE IIFSM, PEAK FWD SURGE CURRENT (A) JUNCTION CAPACITANCE (PF) NUMBER OF CYCLES AT 60 Hz REVERSE VOLTAGE (Volts) TJ=25OC f=1MHz TJ=25OC Single Half Sine Wave (JEDEC Method) FIG-5 TYPICAL REVERSE CHARACTERISTICS IR, INSTANTANEOUS REVERSE CURRENT (uA) PERCENT OF RATED REVERSE VOLTAGE (﹪) TJ=100OC TJ=25OC