DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Formosa MSRS501 THRU RS507 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Issued Date Revised Date Revision Page. DS-242125 2008/02/10 2010/03/10 B 6

5.0A Single-Phase Silicon Bridge Rectifiers- 50-1000V Package outline Page 2 PARAMETER CONDITIONS Average forward rectified current Non-repetitive peak forward surge current Reverse current I t Rating for fusing TA=45°C on chassis=200 cm², See Fig.1 8.3ms single half sine-wave superimposed on rate load Symbol MIN. TYP. MAX. UNIT IO IFSM IR I t A A uA A s 5.0 250 200 5.0O V = V T = 25 CR RRM J O V = V T = 100 CR RRM J 500 RS501 RS502 RS503 100 200 140 SYMBOLS VRRM (V) VRMS VR (V) (V) *1 *2 *3 *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage *4 Maximum forward voltage @IF=5.0A VF (V) RS504 RS505 400 600 280 420 -55 to +125 RS506 RS507 800 1000 560 700 100 200 400 600 800 1000 1.0 Dimensions in inches and (millimeters) Bridge Rectifier Formosa MS O ( C) Operating temperature T ,J http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Storage temperature TSTG O C+175-65 t < 8.3 ms 312 RS-5 Features

  • Surge overload ratings to 250 amperes peak
  • Ideal for printed circuit board
  • Reliable low cost construction technique
  • High case dielectric strength
  • Low forward drop voltage & leakage current
  • Lead-free parts for green partner, meet RoHS requirements
  • UL recognized file # E321971.
  • Suffix "-H" indicates Halogen free parts, ex. RS501-H. Mechanical data
  • Case: Molded plastic RS-5 case
  • Epoxy: UL94-V0 rated flame retardant
  • Terminals: Solderable per MIL-STD-750 Method 2026
  • Polarity: As marked
  • Mounting Position: Any
  • Weight: Approximated 0.37 ounces, 9.8 grams RS501 THRU RS507 Document ID Issued Date Revised Date Revision Page. + ~ ~ – 1.550(39.4) .846(21.5) .807(20.5) .886(22.5) .825(21.0) 1.0(25.4) Min. A B B C .195(5.0) .180(4.6).295(7.5) .256(6.5) A .400(10.2) .354(9.00) B .300(7.60) .285(7.20) C .365(9.30) .345(8.80) .042(1.07) .035(0.97) TJ=25°C TJ=150°C 200 TJ=25°C TJ=150°Ct < 8.3 ms Repetitive peak forward surge current APK 30 A Maximum ratings and Electrical Characteristics (AT T =25A o C unless otherwise noted) DS-242125 2008/02/10 2010/03/10 B 6

Rating and characteristic curves (RS501 THRU RS507) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Issued Date Revised Date Revision Page. Fig. 3 - Typical Instantaneour Forward Characteristics (Per Leg) Instantaneous Forward Voltage (Volts) Instantaneous Forward Current (A) 0.1 1.0 100 Tj=25°C pulse width =300us 1% duty cycle Fig.1 - Forward Current Derating Curve Average Forward Output Current, IF(AV) (A) 0 20 40 60 80 100 120 140 160 Ambient Temperature, TA ( °C) 1.0 Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current, IFSM (A) Number of Cycles at 60 Hz 1 10 100 Percent of Rated Peak Reverse Voltage ( %) Fig. 4 - Typical Reverse Characteristics Per Leg Instantaneous Reverse Current, IR (µA) 0.01 0.1 1.0 100 TJ=25°C 0 20 40 60 80 100 TJ=100°C Reverse Voltage, VR (Volts) Junction Capacitance, CJ (pF) Fig. 5 - Typical Junction Capacitance (Per Leg) 2.0 3.0 4.0 150 120 1.0 10 100 5.0 6.0 resistive load capacitive load 60Hz resistive or inductive load 250 200 150 100 1 cycle T =25 CJ 8.3ms Single Half Sine Wave JEDEC method DS-242125 2008/02/10 2010/03/10 B 6

http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 ~ ~ Bulk packing RS-5 200 230*230*54 490*240*310 2,000 23.0 PACKAGE BOX INNER BOX CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(pcs) RS501 THRU RS507 Document ID Issued Date Revised Date Revision Page. + ~ ~ – DS-242125 2008/02/10 2010/03/10 B 6

http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 RS501 THRU RS507 Document ID Issued Date Revised Date Revision Page. Suggested thermal profiles for soldering processes Temperature(°C) 1.Lead free temperature profile wave-soldering 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) 100 120 140 160 180 200 220 240 260 280 Preheat Max gradient 2ºC/s Peak Max well time 5 Max Cool Down Max gradient-4ºC/s Suggested gradient 2ºC/s or less Peak soldering temperature not to exceed 260ºC DS-242125 2008/02/10 2010/03/10 B 6

http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 RS501 THRU RS507 Document ID Issued Date Revised Date Revision Page. 1. Solder Resistance 2. Solderability 3. High Temperature Reverse Bias 4. Forward Operation Life 5. Intermittent Operation Life 6. Pressure Cooker 7. Temperature Cycling 8. Thermal Shock 9. Forward Surge 10. Humidity 11. High Temperature Storage Life at 260 5 for 10 2sec. immerse body into solder 1/16"±1/32" O at 245±5 C for 5 sec. O V =80% rate at T =125 C for 168 hrs.R J O Rated average rectifier current at T =25 C for 500hrs.A O T = 25 C, I = IA F O On state: power on for 5 min. off state: power off for 5 min. on and off for 500 cycles. O 15P at T =121 C for 4 hrs.SIG A O O -55 C to +125 C dwelled for 30 min. and transferred for 5min. total 10 cycles. O O 0 C for 5 min. rise to 100 C for 5 min. total 10 cycles. 8.3ms single half sine-wave superimposed on rated load, one surge. O at T =85 C, RH=85% for 1000hrs.A O at 175 C for 1000 hrs. O ± C ± MIL-STD-750D METHOD-2031 MIL-STD-202F METHOD-208 MIL-STD-750D METHOD-1038 MIL-STD-750D METHOD-1027 MIL-STD-750D METHOD-1036 JESD22-A102 MIL-STD-750D METHOD-1051 MIL-STD-750D METHOD-1056 MIL-STD-750D METHOD-4066-2 MIL-STD-750D METHOD-1021 MIL-STD-750D METHOD-1031 Item Test Conditions Reference High reliability test capabilities DS-242125 2008/02/10 2010/03/10 B 6