RS50 ASTRODYNE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
50W Single Output Switching Power Supply RS50 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Universal AC input Protections:Short circuit/Over load/Over voltage Cooling by free air convection LED indicator for power on All using 105°C long life electrolytic capacitors High efficiency, long life and high reliability Model Number Output Volts Output Amps Ripple & Noise Min Load DC Volt Adjust Load Reg Volt Tolerance SINGLE OUTPUT RS50-5 5 Volts(DC) 10 Amps 80mV pk-pk 0~10Amps 4.75~5.5Volt(DC) ±1.0% ±2.0% RS50-48 48 Volts(DC) 1.1 Amps 200mV pk-pk 0~1.1Amps 42~54Volt(DC) ±0.5% ±1.0%
50W Single Output Switching Power Supply RS50 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 INPUT SPECIFICATIONS Input Voltage Range 90 ~ 264 VAC; 125~373 Volts(DC) Frequency Range 47-63 Hz Inrush Current, typ: (cold start) 33Amps / 230VAC Input Current 1.3 Amps. @ 115VAC 0.8 Amps. @ 230VAC Leakage current < 2mAmps /240VAC Min Load See Selection Chart OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Line Regulation (Note 3) ±0.5% Load Regulation (Note 4) See Selection Chart Voltage Tolerance (Note2) See Selection Chart Ripple/Noise (Note 1) See Selection Chart Hold Up Time @ FL 60mS/230VAC 14mS/115VAC Setup, Rise Time @ FL 500ms, 20m/230VAC 1200mS, 30mS/115VAC Over Voltage Protection 3.8 ~ 4.45Volt(DC): 3.3Volts(DC) 5.75 ~ 6.75Volt(DC): 5Volts(DC) 13.8 ~ 16.2Volt(DC): 12Volts(DC) 17.25 ~ 20.25Volt(DC): 15Volts(DC) 27.6~ 32.4Volt(DC): 24Volts(DC) 55.2~ 64.8Volt(DC): 48Volts(DC) Hiccup mode, auto recover Over Current Protection 110 ~ 150% rated output power Hiccup mode, auto recover DC Volt Adjust See Selection Chart GENERAL SPECIFICATIONS Safety UL60950-1, TUV EN60950-1 Approved Insulation Resistance ≥ 100MΩ / 500Volts(DC) EMI Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,-3 Efficiency 72% (RS50-3.3) 78% (RS50-5) 81% (RS50-12) 83% (RS50-15) 84% (RS50-24) 86%(RS50-48) Isolation 3000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground EMS Compliance to ENV50204,EN61000-6-2(EN50082-2) heavy Industry Level, Criteria A ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -25°C to +70°C (See Derate Curve) Storage Temperature -40°C to +85°C, 10~95% RH Relative Humidity 20~90% RH non cond Temperature Coefficient ±0.03% / °C (0-50°C) MTBF 228KHrs min,MIL-HDBK-217F(25°C) Vibration 10~500Hz, 5G10min./1cycle, period for 60min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Size Millimeters 99 x 97 x 36 Inches 3.90” x 3.23 ” x 3.82 ” Weight 14.46 oz (410g) NOTE 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Tolerance : includes set up tolerance, line regulation and load regula- tion. 3. Line regulation is measured from low line to high line at rated load. 4. Load regulation is measured from 0% to 100% rated load. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted
50W Single Output Switching Power Supply RS50 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458
50W Single Output Switching Power Supply RS50 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458