RS401 MOSPEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
SINGLE-PHASE BRIDGE RECTIFIER VOLTAGE RANGE 50 to 1000 Volts CURRENT 4.0 Ampere
FEATURES
＊Low cost ＊High forward surge current capability ＊Ideal for printed circuit board ＊High temperature soldering guaranteed: 260oc/10 second at 5 lbs. (2.3kg) tension MECHANICAL DATA ＊Case: Transfer molded plastic ＊Epoxy: UL94V-O rate flame retardant ＊Terminals：Lead Solderable Per MIL-STD-202E method 208C ＊Polarity：As Marking on Body ＊Mounting Position: Any ＊Weight：0.22 ounce, 6.21 gram MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase, half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Characteristic Symbol RS401 RS402 RS403 RS404 RS405 RS406 RS407 Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 200 400 600 800 1000 V RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V
4.0 Average Forward Rectified
Output Current , at TC=50℃(Note 2) T A=50℃(Note 3) IO(AV) 3.0 A Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load ( JEDEC Method) IFSM 150 A Forward Voltage (per element) ( IF =4.0 Amp) VFM 1.0 V TA = 25℃ 10 uA Maximum DC reverse current at rated DC blocking voltage per element TA = 100℃ IR 1.0 mA Rating for Fusing( t<8.3 ms) I2t 93 A2s Typical Junction Capacitance per element (Note1) CJ 55 pF Typical Thermal Resistance (note 3) Rθ jA 20 k/W Operating and Storage Temperature Range TJ , Tstg -65 to +150 ℃ Note: 1 Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C.
FIG-1 FORWARD CURRENT DERATING CURVE FIG-2 TYPICAL FORWARD CHARACTERISITICS AVERAGE FORWARD RECTIFIED CURRENT (Amp.) NSTANTANEOUS FORWARD CURRENT (Amp.) CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 PEAK FORWARD SURGE CURRENT FIG-4 TYPICAL JUNCTION CAPACITANCE IIFSM, PEAK FWD SURGE CURRENT (A) JUNCTION CAPACITANCE (PF) NUMBER OF CYCLES AT 60 Hz REVERSE VOLTAGE (Volts) 8.3 ms Single Half Sine Wave (JEDEC Method) TJ=25OC Mounting on (7.5×7.5×0.3 cm AL Plate
60 Hz Resistive or
P.C.B Mounting Copper Pads 0.375”(9.5mm) Lead Length TC TA TJ=25OC f=1Mhz Vstg=50m Vp-p TJ=25OC Pulse Width=300us 1% Duty Cycle FIG-5 TYPICAL REVERSE CHARACTERISTICS IR, INSTANTANEOUS REVERSE CURRENT (uA) PERCENT OF RATED REVERSE VOLTAGE (﹪) TJ=100OC TJ=25OC