RS401L SEMTECH_ELEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
- Ideal for printed circuit board
- Surge overload rating: 200 amperes peak
- Mounting position: Any
- Weight:4.8 grams
- Molded structure Absolute Maximum Ratings and Characteristics Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols RS 401L RS 402L RS 403L RS 404L RS 405L RS 406L RS 407L Units Maximum recurrent peak reverse voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS bridge input voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 Volts Maximum average forward output current at TA = 75 OC IO Amps Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 200.0 Amps Maximum forward voltage drop per bridge element at 4A DC V F 1 Volts Typical junction Capacitance (Note) C J 40 pF @TA = 25OC 10 µAmpsMaximum reverse current at rated DC blocking voltage per element @T A =100 OC IR 1 mAmps Operating and storage temperature range T J ,TS -55 to +150 OC Notes: (1) Measured at 1 MHz and applied reverse voltage of 4volts.
Dated : 23/06/2003 SEMTECH ELECTRONICS LTD. (Subsidiary of Semtech International Holdings Limited, acompany listed on the Hong Kong Stock Exchange, Stock Code: 724) FIG.3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD VOLTAGE,(V) INSTANTANEOUS FORW ARD CURRENT,(A) 0.6 0.1 0.8 100 Pulse Width=300us 1% Duty Cycle oTj=25 C 8.3 ms Single Half Sine-Wave (JEDEC Methode) NUMBER OF CYCLES AT 60 Hz PEAK FORW ARD SURGE CURRENT,(A) 150 100 200 250 300 51 0 2 0 10050 FIG.4-TYPICAL REVERSE CHARACTERISTICS Tj=25 C PERCENT OF RATED PEAK REVERSE VOLTAGE (%) INSTANTANEOUS REVERSE CURRENT, (uA) 0.01 20 40 60 80 o 0.1 1.0 Tj=100 Co 120 140 Single Phase Half Wave 60Hz Inductive or Resistive Load FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE CASE TEMPERATURE. ( C)AVERAGE FORW ARD OUTPUT CURRENT,(A) 50 100 o 150 RATINGS AND CHARACTERISTIC CURVES (RS401L THRU RS407L) FIG.1-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 100 RS401L THRU RS407L