RS3AFG CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Fast switching for high efficiency Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 260°C/10 seconds at terminals Glass passivated chip junction Dimensions in inches and (millimeters) Case : JEDEC DO-214AC/SMAF Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.00095ounce, 0.027 grams Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unlss otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Parameter SYMBOLS RS3AFG RS3BFG RS3DFG RS3GFG RS3JFG RS3KFG RS3MFG UNITS Marking Code MDD RS3AF MDD RS3BF MDD RS3DF MDD RS3GF MDD RS3JF MDD RS3KF MDD RS3MF Maximum repetitive peak reverse voltage VRMM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at TL=90¥ I(AV) 3.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 80 A Maximum instantaneous forward voltage at 3 .0A VF 1.30 V Maximum DC reverse current TA=25℃ at rated DCblocking voltage TA=125℃ IR 5.0 100.0 μA Maximum reverse recovery time (NOTE 1) trr 150 250 500 ns Typical junction capacitance (NOTE 2) CJ 32.0 pF Typical thermal resistance (NOTE 3) RJA 50.0 ℃/W Operating junction and storage temperature range TJ,TSTG -55 to +150 ℃ Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A 3.The typical data above is for reference only. SMBF 0.216(5.50) 0.200(5.10) 0.048(1.20) 0.031(0.80) 0.010(0.26) 0.007(0.18) 0.051(1.30) 0.043(1.10) 0.173(4.40) 0.165(4.20) 0.086 (2.20) 0.075 (1.90) 0.146(3.70) 0.138(3.50)
Rev:2019A0 Page :2 Ratings And Characteristic Curves https://www.microdiode.com Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Ampere RS3AFG THRU RS3MFG The curve above is for reference only. 0.2 0.4 0.6 0.8 1.0 1.2 0.0 25 50 75 100 125 150 175 Fig.1 Forward Current Derating Curve Average Forward Current (A) Case Temperature (°C) Single phase half-wave 60 Hz resistive or inductive load Fig.3 Typical Instaneous Forward Instaneous Forward Current (A) 0.01 0.1 1.0 Instaneous Forward Voltage (V) Characteristics TJ=25°C pulse with 300 μs 1% duty cycle Fig.2 Typical Reverse Characteristics 0.1 1.0 100 20 40 60 80 100 12000 140 percent of Rated Peak Reverse Voltage (%) Instaneous Reverse Current（μ A） TJ=125°C TJ=25°C Fig.4 Typical Junction Capacitance Junction Capacitance (pF) 1.0 10 1000.1 100 Reverse Voltage (V) TJ=25°C 10 100 Fig.5 Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method)
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing Reverse Voltage - 50 to 1000 Volts Forward Current - 3.0 Ampere RS3AFG THRU RS3MFG 0.118 0.260 Symbol Unit (mm) A C D 0.071 6.6 3.0 E B Unit (inch) 0.189 1.8 0.1002.54 4.8 SMBF 13" 5 ,000 4.0 10,000 190*190*41 330 365* 365* 360 80,000 14.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(mm)(mm)(mm)(pcs)(mm)(pcs) Item Tolerance SMBF Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 13" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 unit:mm 1 . 50 330.00 50.00 13.00 1.75 5.50 4.00 4.00 2.00 0.30 12.00 3.81 12.30W1Reel width