RS3K MULTICOMP | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
www.element14.com www.farnell.com www.newark.com Page <1> V1.029/11/12 RS3 Series Fast Recovery Power Diode Features:
- For surface mounted application
- Glass passivated junction chip
- Built-in strain relief, ideal for automated placement
- Fast switching for high efficiency
- High temperature soldering : 260°C/10 seconds at terminals Mechanical Data: Cases : Moulded plastic Terminals : Solder plated Polarity : Indicated by cathode band Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Type Number Symbol RS3B RS3K Unit Maximum Recurrent Peak Reverse Voltage Vrrm 100 800 VMaximum RMS Voltage Vrms 70 560 Maximum DC Blocking Voltage Vdc 100 800 Maximum Average Forward Rectified Current See Figure 1 at Tl= 75°C I(AV) 3 APeak Forward Surge Current, 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Ifsm 100 Maximum Instantaneous Forward Voltage at 3A Vf 1.3 V Maximum DC Reverse Current at Ta = 25°C at Rated DC Blocking Voltage at Ta = 125°C Ir 250 μA Maximum Reverse Recovery Time (Note 1) Trr 150 500 nS Typical Junction Capacitance (Note 2) cj 60 pF Typical Thermal Resistance (Note 3) RθJA RθJL 15 °C/W Operating Temperature Range Tj -55 to +150 °C Storage Temperature Range TsTg Notes: 1. Reverse Recovery Test Conditions : If = 0.5A, Ir = 1A, Irr = 0.25A 2. Measured at 1MHz and Applied Vr = 4V 3. Thermal Resistance from Junction to Ambient and from Junction to Lead Mounted on PCB with 0.6" × 0.6" (16mm × 16 mm) Copper Pad Areas.
www.element14.com www.farnell.com www.newark.com Page <3> V1.029/11/12 RS3 Series Fast Recovery Power Diode Important Notice : This data sheet and its contents (the “Information”) belong to the members of the Premier Farnell group of companies (the “Group”) or are licensed to it. No licence is granted for the use of it other than for information purposes in connection with the products to which it relates. No licence of any intellectual property rights is granted. The Information is subject to change without notice and replaces all data sheets previously supplied. The Information supplied is believed to be accurate but the Group assumes no responsibility for its accuracy or completeness, any error in or omission from it or for any use made of it. Users of this data sheet should check for themselves the Information and the suitability of the products for their purpose and not make any assumptions based on information included or omitted. Liability for loss or damage resulting from any reliance on the Information or use of it (including liability resulting from negligence or where the Group was aware of the possibility of such loss or damage arising) is excluded. This will not operate to limit or restrict the Group’s liability for death or personal injury resulting from its negligence. Multicomp is the registered trademark of the Group. © Premier Farnell plc 2012. SMC/DO-214AB Dimensions: Dimensions : Inches (Millimetres) Dimensions : Millimetres Foot Print Length Width Depth X Y Z If(av) (A) Vrrm (V) Ifsm (A) trr Max (nS) Vf (V) at If = 3(A) Package Part Number 100 100 150
1.3 DO-214AB
(SMC) RS3B 800 500 RS3K Part Number Table