RS2A TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
/cuspopen For surface mounted application /cuspopen Glass passivated junction chip /cuspopen Built-in strain relief, ideal for automated placement /cuspopen Plastic material used carries Underwriters Laboratory Classification 94V-O /cuspopen Fast switching for high efficiency /cuspopen High temperature soldering: 2 6 0 ℃/ 10 seconds at terminals Mechanical Data /cuspopen Cases: Molded plastic /cuspopen Terminals: Solder plated /cuspopen Polarity: Indicated by cathode band /cuspopen Packing: 12mm tape per E1A STD RS-481 /cuspopen Weight: 0.093 gram SMB/DO-214AA Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbol RS RS RS RS RS RS RS Units Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current See Fig. 1 @T L=100OC I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 A Maximum Instantaneous Forward Voltage @ 2.0A VF 1.3 V Maximum DC Reverse Current @ TA =25℃ at Rated DC Blocking Voltage @ TA=125℃ IR 5 200 uA uA Maximum Reverse Recovery Time ( Note 1 ) Trr 150 250 500 nS Typical Junction Capacitance ( Note 2 ) Cj 50 pF Typical Thermal Resistance (Note 3) RθJA RθJL 55.0 18.0 ℃/W ℃/W Operating Temperature Range TJ -55 to +150 ℃ Storage Temperature Range TSTG -55 to +150 ℃ Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1 MHz and Applied V R=4.0 Volts 3. Thermal Resistance from Junction to Ambient and Junction to Lead Mounted on P.C.B . with 0.4”x0.4” ( 10 x 10 mm ) Copper Pad Areas.
- 389 - FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.1 0.01 FORWARD VOLTAGE. (V) Pulse Width=300 s 1% Duty Cycle Tj=25 C0 RATINGS AND CHARACTERISTIC CURVES (RS2A THRU RS2M) FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 50 60 70 80 90 100 110 120 140130 150 160 0.5 1.0 1.5 2.0 LEAD TEMPERATURE. ( C) o RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED COPPER PAD AREAS FIG.2- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz TL=100 C 8.3ms Single Half Sine Wave JEDEC Method FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 1 10 100 REVERSE VOLTAGE. (V) Tj=25 C f=1.0MHz Vsig=50mVp-p FIG.4- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT .( A ) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) 0.1 100 Tj=125 C0 Tj=25 C0 2.25 55 0