RS2AW_V01 CHENDA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

Ideal for surface mouted applications Low reverse leakage Metallurgically bonded construction High temperature soldering guaranteed: 250°C/10 seconds,0.375”(9.5mm) lead length, 5 lbs. (2.3kg) tension Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere Mechanical Data Case: JEDEC 6OD-123FL molded plastic body Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Polarity symbol marking on body Mounting Position: Any Weight : 0.007 ounce, 0.02 grams Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum Ratings And Electrical Characteristics Parameter SYMBOLS RS2AW RS2BW RS2DW RS2GW RS2JW RS2KW RS2MW UNITS Marking Code MDD 2F1 MDD 2F2 MDD 2F3 MDD 2F4 MDD 2F5 MDD 2F6 MDD 2F7 Maximum repetitive peak reverse voltage V RMM 50 100 200 400 600 800 1000 V Maximum RMS voltage V RMS 35 70 140 280 420 560 700 V Maximum DC blocking voltage V DC 50 100 200 400 600 800 1000 V Maximum average forward rectified current at TL(see fig.1) I (AV) 2.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) I FSM A Maximum instantaneous forward voltage at 2.0A V F 1.3 V Maximum DC reverse current TA=25 at rated DCblocking voltage TA=125 I R 50 mA Typical junction capacitance (NOTE 1) C J pF Maximum Reverse Recovery Time t rr 150 250 500 ns Typical thermal resistance (NOTE 2) R JA 90.0 W Operating junction temperature range T J - 5 5t o+ 1 2 5 Storage temperature range T STG - 5 5t o+ 1 5 0 Note: The typical data above is for reference only. Dimensions in inches and (millimeters) SOD-123FL 0.154(3.90) 0.141(3.60) 0.035(0.90) 0.028(0.70) 0.008(0.20) 0.005(0.12) 0.043(1.10) 0.035(0.90) 0.114(2.90) 0.102(2.60) 0.031 (0.08) 0.043 (1.10) 0.075(1.90) 0.067(1.70)

Rev:2019A0 Page :2 Typical Characterisitics The curve above is for reference only. https://www.microdiode.com RS2AW THRU RS2MW Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere 10 100 Fig.5 Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method) Fig.3 Typical Instaneous Forward Characteristics Instaneous Forward Current (A) 0.01 0.1 1.0 Instaneous Forward Voltage (V) TJ=25°C pulse with 300 μs 1% duty cycle Fig.2 Typical Reverse Characteristics 0.1 1.0 100 20 40 60 80 100 12000 140 percent of Rated Peak Reverse Voltage (%) Instaneous Reverse Current（μ A） TJ=125°C TJ=25°C 25 50 75 100 125 150 175 Average Forward Current (A) Ambient Temperature (°C) Single phase half-wave 60 Hz resistive or inductive load Fig.1 Forward Current Derating Curve 0.5 1.0 1.5 2.0 2.5 0.0 100LFM Junction Capacitance (pF) 1.0 10 1000.1 100 Reverse Voltage (V) TJ=25°C Fig.4 Typical Junction Capacitance 200

https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout 0.079 0.173 Symbol Unit (mm) A C D 0.047 4.4 E B Unit (inch) 0.126 1.2 0.0471.2 E B d F W PA D D1D2 C T Item Tolerance SOD-123FL Carrier width Carrier length Carrier depth Sprocket hole 7" Reel outside diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D Reel width W1 Symbol 0.1 0.1 0.1 min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 unit:mm 1.55 178.00 50.0 13.00 1.75 3.50 4.00 4.00 2.00 0.25 8.15 10.5 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2.1 4.0 1.60 Reel packing SOD-123FL 7" 3,000 4.0 45,000 210*208*203 178 430*430*235 180,000 9.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) 3.2 RS2AW THRU RS2MW Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere