RS2A

RS2A_V01 CHENDA | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

Features

Ratings at 25 C ambient temperature unless otherwise specified. Single phase half-wave 60Hz,resistive or inductive load,for capacitive load current derate by 20%. Maximum repetitive peak reverse voltage 200 400 800 1000 V Maximum RMS voltage VRMS 70 140 280 560 700 V Maximum DC blocking voltage VDC 100 200 400 800 1000 V Maximum average forward rectified current at TL=90℃ I(AV) 2.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 50 A Maximum instantaneous forward voltage at 2.0A VF V Maximum DC reverse current at rated DC blocking voltage TA=25℃ TA=125℃ IR 5.0 100.0 Typical junction capacitance (NOTE 2) CJ 15.0 pF Typical thermal resistance (NOTE 3) RθJA 65.0 ℃/W RS2B RS2D UNITS Parameter RS2G RS2J RS2K RS2M MDD RS2B MDD RS2D MDD RS2G MDD RS2J MDD RS2K MDD RS2M SYMBOLS 1.30 μA TJ,TSTG -55 to +150 ℃Operating junction and storage temperature range Maximum Ratings And Electrical Characteristics VRMM MDDMarking Code RS2A RS2A 100 600 420 600 Note:1.Reverse recovery condition IF=0.5A,IR=1.0A,Irr=0.25A 3.The typical data above is for reference only. Maximum reverse recovery time (NOTE 1) trr 150 250 500 ns Mechanical Data The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 Idea for printed circuit board Open Junction chip Low reverse leakage High forward surge current capability High temperature soldering guaranteed: 250℃/ 10 seconds at terminals Glass passivated chip junction Case : JEDEC DO-214AC/SMA Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Weight : 0.002 ounce, 0.055 grams DO-214AC/SMA Dimensions in inches and (millimeters) 0.177(4.50) 0.157(3.99) 0.110(2.80) 0.094(2.40) 0.060(1.52) 0.030(0.76) 0.222(5.66) 0.194(4.93) 0.012(0.305) 0.006(0.152) 0.008(0.203)MAX. 0.096(2.42) 0.078(1.98) 0.067 (1.70) 0.039 (1.00)

Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere RS2A THRU RS2M 0.5 1.0 1.5 2.0 2.5 3.0 0.0 25 50 75 100 125 150 175 Fig.1 Forward Current Derating Curve Average Forward Current (A) Case Temperature (°C) Single phase half-wave 60 Hz resistive or inductive load Fig.3 Typical Instaneous Forward Instaneous Forward Current (A) 0.01 0.1 1.0 Instaneous Forward Voltage (V) Characteristics TJ=25°C pulse with 300μs 1% duty cycle Fig.2 Typical Reverse Characteristics 0.1 1.0 100 20 40 60 80 100 12000 140 percent of Rated Peak Reverse Voltage (%) Instaneous Reverse Current（μA） TJ=125°C TJ=25°C Junction Capacitance (pF) 1.0 10 1000.1 100 Reverse Voltage (V) TJ=25°C Fig.4 Typical Junction Capacitance TJ=25°C f = 1.0MHz Vsig = 50mVp-p 10 100 Fig.5 Maximum Non-Repetitive Peak Forward Surge Current Peak Forward Surge Current (A) Number of Cycles 8.3 ms Single Half Sine Wave (JEDEC Method)

https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout 0.095 0.215 Symbol Unit (mm) A C3 .90 D 0.060 5.45 2.41 E B Unit (inch) 0.154 1.52 0.0661.68 E B d F W PA D D1D2 C T Item Tolerance SMA Carrier width Carrier length Carrier depth Sprocket hole 13" Reel outside diameter 7" Reel outside diameter 13" Reel inner diameter 7" Reel inner diameter Feed hole diameter Sprocket hole position Punch hole position Punch hole pitch Sprocket hole pitch Embossment center Overall tape thickness Tape width P E B C d F T W P A D D D Reel width W1 Symbol 0.1 0.1 0.1 min min 0.5 0.1 0.3 1.0 0.1 0.05 0.1 0.1 0.1 0.1 2.0 2.0 unit:mm 1.50 330.00 178.00 50.00 62.00 13.00 1.75 5.50 4.00 4.00 2.00 0.28 12.00 18.00 Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. 2.80 5.33 2.36 Reel packing SMA 7" 2,000 4.0 4,000 183*155*183 178 382*356*392 160,000 16.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) SMA 11" 5,000 4.0 10,000 290* 290*38 330 310*3 10*360 80,000 11.0 Reverse Voltage - 50 to 1000 Volts Forward Current - 2.0 Ampere RS2A THRU RS2M SMA 13" 7,500 4.0 15,000 335*335*38 330 350*330*360 120,000 14.5