RS2A_1 DIODES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

AA, BA, DA, GA, JA, KA, MA Suffix Designates SMA Package A, B, D, G, J, K Suffix Designates SMB Package Dim SMA SMB Min Max Min Max A 2.29 2.92 3.30 3.94 B 4.00 4.60 4.06 4.57 C 1.27 1.63 1.96 2.21 D 0.15 0.31 0.15 0.31 E 4.80 5.59 5.00 5.59 G 0.10 0.20 0.10 0.20 H 0.76 1.52 0.76 1.52 J 2.01 2.30 2.00 2.40 All Dimensions in mm A B C D GH E J

  • Glass Passivated Die Construction
  • Fast Recovery Time For High Efficiency
  • Surge Overload Rating to 50A Peak
  • Ideally Suited for Automated Assembly
  • Lead Free Finish/RoHS Complaint (Note 4) Mechanical Data
  • Case: SMA/SMB
  • Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0
  • Moisture Sensitivity: Level 1 per J-STD-020C
  • Terminals: Lead Free Plating (Matte Tin Finish). Solderable per MIL-STD-202, Method 208
  • Polarity: Cathode Band or Cathode Notch
  • Marking Information: See Page 3
  • Ordering Information: See Page 3
  • SMA Weight: 0.065 grams (approximate)
  • SMB Weight: 0.09 grams (approximate) Maximum Ratings and Electrical Characteristics TA = 25°C unless otherwise specified Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Symbol RS2 A/AA RS2 B/BA RS2 D/DA RS2 G/GA RS2 J/JA RS2 K/KA RS2 M/MA Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage (Note 5) VRRM VRWM VR 50 100 200 400 600 800 1000 V RMS Reverse Voltage VR(RMS) 35 70 140 280 420 560 700 V Average Rectified Output Current @ TT = 120°C IO 1.5 A Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave Superimposed on Rated Load IFSM 50 A Forward Voltage @ IF = 1.5A VFM 1.3 V Peak Reverse Current @ TA = 25°C at Rated DC Blocking Voltage (Note 5 ) @ TA = 125°C IRM 5.0 200 mA Reverse Recovery Time (Note 3) trr 150 250 500 ns Typical Total Capacitance (Note 2) CT 30 pF Typical Thermal Resistance, Junction to Terminal (Note 1) RqJT 20 °C/W Operating and Storage Temperature Range Tj, TSTG -65 to +150 °C Notes: 1. Thermal Resistance: Junction to terminal, unit mounted on PC board with 5.0 mm2 (0.013 mm thick) copper pads as heat sink. 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 5. Short duration pulse test used to minimize self-heating effect.

DS15004 Rev. 9 - 2 2 of 3 RS2A/A - RS2M/A www.diodes.com 0.5 1.0 1.5 25 50 75 100 125 150 175 I , AVERAGE RECTIFIED CURRENT (A)O T , TERMINAL TEMPERATURE (°C)T Fig. 1 Forward Current Derating Curve 0.01 0.1 1.0 0 0.4 0.8 1.2 1.6 T = 25°Cj I INSTANTANEOUS FORWARD CURRENT (A)F, V , INSTANTANEOUS FORWARD VOLTAGE (V)F Fig. 2 Typical Forward Characteristics 1 10 100 I , PEAK FORWARD SURGE CURRENT (A)FSM NUMBER OF CYCLES AT 60 Hz Fig. 3 Forward Surge Current Derating Curve Single Half-Sine-Wave T = 150°Cj 50V DC Approx Oscilloscope (Note 1) Pulse Generator (Note 2) Device Under Test trr Set time base for 50/100 ns/cm +0.5A -0.25A -1.0A Fig. 5 Reverse Recovery Time Characteristic and Test Circuit (+) (+) (-) (-) 0.1 1.0 100 1000 0 20 40 60 80 100 120 140 I , INSTANTANEOUS REVERSE CURRENT (µA)R PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Fig. 4, Typical Reverse Characteristics T = 125°Cj T = 25°Cj

DS15004 Rev. 9 - 2 3 of 3 RS2A/A - RS2M/A www.diodes.com IMPORTANT NOTICE Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to any product herein. Diodes Incorporated does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights, nor the rights of others. The user of products in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on our website, harmless against all damages. LIFE SUPPORT Diodes Incorporated products are not authorized for use as critical components in life support devices or systems without the expressed written approval of the President of Diodes Incorporated. Ordering Information (Note 6) Device* Packaging Shipping RS2xA-13-F RS2x-13-F SMA SMB 5000/Tape & Reel 5000/Tape & Reel * x = Device type, e.g. RS2DA-13-F (SMA package); RS2J-13-F (SMB package). Marking Information RS2X = Product Type Marking Code, ex: RS2G (SMB package) RS2XA = Product Type Marking Code, ex: RS2GA (SMA package) = Manufacturer’s Code Marking YWW = Date Code Marking Y = Last Digit of Year ex: 6 for 2006 WW = Week code 01 to 52 YWW RS2X(A)