RS2-0512D10A1T

RS2-0505S10AXT RSG | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (4) STAND Juni 2016 Rev 01 1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RS2-S10T/D10T 1.0W High temperature Single & Dual Output we energize electronics! an acal group company we energize electronics!

• 7 Pin SIL Package
• 1500VDC Isolation
• Up to 3000VDC Isolation
• Continuous Short Circuit Protection
• Low Ripple and Noise
• Efficiency up to 81%
• Operating Temperature Range: -40° ~ +105°C
• Non Conductive Black Plastic Case
• EMI Complies with EN55022 Class B OUTPUT SPECIFICATION Voltage accuracy: see tolerance envelope curve Line regulation: per 1%Vin Change: ±1.2% LOAD REGULATION: from 10% to 100% Load: ±7.5 ~ ±10% Cross Regulation (Dual Output): ±4% Short Circuit Protection : continuous, auto recovery Ripple noise (20Mhz bandwidth): 75mV pk-pk Temperature coefficient: ±0.02% °C Capacitor load: see table INPUT SPECIFICATIONS Voltage Range: ±10% Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: Capacitors Input Reflected Ripple Current: 15mA pk-pk Start up time: 20ms typ. (nominal Vin and constant resistance load) GENERAL SPECIFICATIONS Efficiency: See table I/O Isolation Voltage (60sec): 1500 ~ 3000VDC I/O Isolation Capacitance: 50pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: Variable 50kHz Humidity: 95% rel H Reliability Calculated MTBF : >3.6MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+105°C (see Derating Curve) Maximum Case Temperature: 115°C Storage Temperature : -55°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Non-conductive Black Plastic (UL94V-0 rated) PIN Material SIP Case: C5191R-H Solder coated Potting Material: Epoxy (UL94V-0 rated) Weight Case- Sip: 2.4g Dimmension SIP: 0.76 x 0.24 x 0.39“ ABSOLUTE MAXIMUM RATINGS (1) Input Surge Voltage (100ms)/

5 V Models: 9VDC max

12V Models: 18VDC max 24V Models: 30VDC max Soldering Temperature (2): 260°C max. EMC SPECIFICATIONS Radiated-/Conducted Emissions: EN55022 Class B ESD: IEC 61000-4-2 Perf.Criteria A RS: IEC 61000-4-3 Perf.Criteria A EFT: IEC 61000-4-4 Perf.Criteria A SURGE: IEC 61000-4-5 Perf.Criteria A CS: IEC 61000-4-6 Perf.Criteria A PFMF IEC 61000-4-8 Perf.Criteria A RoHS

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 2 (4) STAND Juni 2016 Rev 01 MODEL SELECTION GUIDE MOD EL N U MBE R IN PU T Volt age R an ge (Vd c) IN PU T C urrent OUTP UT V olta ge (Vd c) OU TPU T C urrent Full loa d (m A) E FFI CIEN CY @ FL (%) C ap acito r L oa d(uF) N o-Loa d (m A) Full Lo ad (m A) RS2-05 05 S10AXT 5 ( 4.5 ~ 5. 5 ) 4 0 253 5 2 00 80 22 0 RS2-05 12 S10AXT 5 ( 4.5 ~ 5. 5 ) 4 0 253 1 2 8 3.3 80 10 0 RS2-05 15 S10AXT 5 ( 4.5 ~ 5. 5 ) 4 0 253 1 5 6 6.7 80 10 0 RS2-12 05 S10AXT 12 ( 10. 8 ~ 1 3.2 ) 1 8 105 5 2 00 80 22 0 RS2-12 12 S10AXT 12 ( 10. 8 ~ 1 3.2 ) 1 8 105 1 2 8 3.3 80 10 0 RS2-12 15 S10AXT 12 ( 10. 8 ~ 1 3.2 ) 1 8 104 1 5 6 6.7 81 10 0 RS2-24 05 S10AXT 24 ( 21. 6 ~ 2 6.4 ) 9 53 5 2 00 80 22 0 RS2-24 12 S10AXT 24 ( 21. 6 ~ 2 6.4 ) 9 53 1 2 8 3.3 80 10 0 RS2-24 15 S10AXT 24 ( 21. 6 ~ 2 6.4 ) 9 53 1 5 6 6.7 80 10 0 RS2-050 5D10AXT 5 ( 4.5 ~ 5. 5 ) 4 0 253 ±5 ±1 00 80 ±10 0 RS2-051 2 D10AXT 5 ( 4.5 ~ 5. 5 ) 4 0 253 ±1 2 ±41 .67 80 ±47 RS2-051 5 D10AXT 5 ( 4.5 ~ 5. 5 ) 4 0 250 ±1 5 ±33 .33 81 ±47 RS2-120 5 D10AXT 12 ( 10. 8 ~ 1 3.2 ) 1 8 105 ±5 ±1 00 80 ±10 0 RS2-121 2 D10AXT 12 ( 10. 8 ~ 1 3.2 ) 1 8 105 ±1 2 ±41 .67 80 ±47 RS2-121 5 D10AXT 12 ( 10. 8 ~ 1 3.2 ) 1 8 105 ±1 5 ±33 .33 80 ±47 RS2-240 5 D10AXT 24 ( 21. 6 ~ 2 6.4 ) 9 53 ±5 ±1 00 80 ±10 0 RS2-241 2 D10AXT 24 ( 21. 6 ~ 2 6.4 ) 9 53 ±1 2 ±41 .67 80 ±47 RS2-241 5 D10AXT 24 ( 21. 6 ~ 2 6.4 ) 9 53 ±1 5 ±33 .33 80 ±47 Suffix “3”means 3 K Vdc isolation The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : info@rsg -electronic.de DC/DC-Converter RS2-S10T/D10T 1.0W High temperature Single & Dual Output we energize electronics! an acal group company we energize electronics! RS2 - XX XX X XX Power (W) Input Type A X T Code internal Isolation (kVDC) RS2 - XX XX X XX Power (W) Input Type A X T Code internal Isolation (kVDC)

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (4) STAND Juni 2016 Rev 01 +Vout +Vin L DC/DC Converter Load -Vin -Vout Copper Strip +Vout Single DC/DC Converter 0. 1uF Cout Scope -Vout Input Reflected Ripple Current Test Step Input reflected ripple current is measured through a source inductor Lin(12uH) and a source capacitor Cin(47uF, ESR<1.0© aRS200KHz) at nominal input and full load. +Vout Output Voltage Tolerance Envelope Curve The voltage tolerance envelope shows typical load regulation characteristics for this product series. The tolerance envelope is the maximum output voltage variation due to changes in output loading. Lin Current Probe Cin +Vin DC/DC Converter Load 10 7.5 -Vin -Vout 5 2.5 Output Ripple & Noise Measurement Test Use a capacitor Cout(0.1uF) measurement. The Scope measurement bandwidth is 0-20MHz. Resistive Load SURGE Filter Input components (C2,D1 ) are used to help meet surge test requirement for the module. -2.5 -7.5 -10 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% Load (%) ( NominalInput Voltage ) EMI Filter Input filter components (C1, L ) are used to help meet conducted emiS10A1Tions requirement for the module. These components should be mounted as close as poS10A1Tible to the module; and all leads should be minimized to decrease radiated noise. +Vin +Vout C2 D1 DC/DC Converter Load -Vin -Vout C1 L RS2-05XXS10/D10AXT 1206, 4.7uF/50V 6.8uH RS2-12XXS10/D10AXT 1206, 4.7uF/50V 6.8uH RS2-24XXS10/D10AXT 1206, 4.7uF/50V 6.8uH C2 D1 RS2-05XXS10/D10AXT 1000uF/35V 3.0SMCJ9.0AG RS2-12XXS10/D10AXT 1000uF/35V 3.0SMCJ18AG RS2-24XXS10/D10AXT 330uF/50V 3.0SMCJ28AG Output Voltage accuracy(%) DC/DC-Converter RS2-S10T/D10T 1.0W High temperature Single & Dual Output we energize electronics! an acal group company we energize electronics!

RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 4 (4) STAND Juni 2016 Rev 01 RS2-XXXXS10A1T RS2-XXXXS10A1T DC/DC-Converter RS2-S10T/D10T 1.0W High temperature Single & Dual Output we energize electronics! an acal group company we energize electronics! The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28