RS2-0503T10AX RSG | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 1 (3) STAND Juni 2016 Rev 01 1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. OUTPUT SPECIFICATION Voltage accuracy: ±3% Line regulation: per 1%Vin Change: ±1.2% LOAD REGULATION: from 20% to 100%: Load ±10% Output 3.3V Model: ±20% Ripple noise (20Mhz bandwidth): 75mV pk-pk Temperature coefficient: ±0.02% °C Capacitor load: See table INPUT SPECIFICATIONS Voltage Range: ±10% Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: Capacitors Input Reflected Ripple Current : 20mA pk-pk GENERAL SPECIFICATIONS Efficiency: See table I/O Isolation Voltage (60sec): 1000 ~ 3000VDC I/O Isolation Capacitance: 60pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: Variable 80kHz Humidity: 95% rel H Reliability Calculated MTBF : >1.121MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 100°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Non-conductive Black Plastic (UL94V-0 rated) PIN Material SIP Case: Ø 0.5mm Alloy42 Solder-coated Potting Material: Epoxy (UL94V-0 rated) Weight Case- Sip: 2.3g Weight Case-DIP: 2.6g Dimmension SIP: 0.76 x 0.24 x 0.39“ Dimmension DIP: 0.80 x 0.40 x 0.27“ ABSOLUTE MAXIMUM RATINGS (1) Input Surge Voltage (100ms)/
5 V Models: 7VDC max
12V Models: 15VDC max 24V Models: 28VDC max 48V Models: 54VDC max Soldering Temperature (2): 260°C max.
- 7 Pin SIL/ 14Pin DIL Package
- 1000VDC Isolation
- Up to 3000VDC Isolation
- Low Ripple and Noise
- Efficiency up to 80%
- Operating Temperature Range: -40° ~ +85°C
- Non Conductive Black Plastic Case DC/DC-Converter RS2/RD2-E10/T10 1.0W Unregulated Dual Separate Output we energize electronics! an acal group company we energize electronics! RoHS
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 2 (3) STAND Juni 2016 Rev 01 RD2 - XX XX X XX Power (W) Input Type A X Code internal Isolation (kVDC) MODEL SELECTION GUIDE MODEL NUMBER INPUT Voltage Range (Vdc) INPUT Current OUTPUT Voltage(Vdc) Output1 Output2 OUTPUT Current EFFICIENCY @FL(%) Capacitor Load(uF) No-Load (mA) Full Load (mA) Full load(mA) Output1 Output2 RS2/RD2-0503T10AX 5 25 259 5 , 3.3 100 , 152 77 100 RS2/RD2-0507T10AX 5 25 266 5 , 7.2 100 , 69 75 100 RS2/RD2-0509T10AX 5 25 259 5 , 9 100 , 56 77 100 RS2/RD2-0512T10AX 5 25 259 5 , 12 100 , 42 77 100 RS2/RD2-0515T10AX 5 25 256 5 , 15 100 , 33 78 100 RS2/RD2-1203T10AX 12 15 106 5 , 3.3 100 , 152 78 100 RS2/RD2-1207T10AX 12 15 111 5 , 7.2 100 , 69 75 100 RS2/RD2-1209T10AX 12 15 108 5 , 9 100 , 56 77 100 RS2/RD2-1212T10AX 12 15 92 5 , 12 100 , 42 80 100 RS2/RD2-1215T10AX 12 15 106 5 , 15 100 , 33 78 100 RS2/RD2-2403T10AX 24 8 55 5 , 3.3 100 , 152 75 100 RS2/RD2-2407T10AX 24 8 55 5 , 7.2 100 , 69 75 100 RS2/RD2-2409T10AX 24 8 54 5 , 9 100 , 56 77 100 RS2/RD2-2412T10AX 24 8 53 5 , 12 100 , 42 78 100 RS2/RD2-2415T10AX 24 8 53 5 , 15 100 , 33 78 100 RS2/RD2-0505E10AX 5 25 266 5 , 5 100 , 100 75 100 RS2/RD2-0507E10AX 5 25 259 7.2 , 7.2 69 , 69 77 100 RS2/RD2-0509E10AX 5 25 253 9 , 9 56 , 56 79 100 RS2/RD2-0512E10AX 5 25 250 12 , 12 42 , 42 80 100 RS2/RD2-0515E10AX 5 25 243 15 , 15 33 , 33 82 100 RS2/RD2-1205E10AX 12 15 111 5 , 5 100 , 100 75 100 RS2/RD2-1207E10AX 12 15 108 7.2 , 7.2 69 , 69 77 100 RS2/RD2-1209E10AX 12 15 108 9 , 9 56 , 56 77 100 RS2/RD2-1212E10AX 12 15 104 12 , 12 42 , 42 80 100 RS2/RD2-1215E10AX 12 15 102 15 , 15 33 , 33 81 100 RS2/RD2-2405E10AX 24 8 55 5 , 5 100 , 100 75 100 RS2/RD2-2407E10AX 24 8 54 7.2 , 7.2 69 , 69 77 100 RS2/RD2-2409E10AX 24 8 52 9 , 9 56 , 56 79 100 RS2/RD2-2412E10AX 24 8 50 12 , 12 42 , 42 82 100 RD2-2415E10AX 24 8 50 15 , 15 33 , 33 82 100 Suffix “3” means 3 KVdc isolation The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e- mail to : info@rsg -electronic.de NOTE 1.Ripple/Noise measured with 20MHz bandwidth. 2.Tested by minimal Vin and constant resistive load. 3.Measured Input reflected ripple current with a simulated source inductance of 12uH. 4.Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5. Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. 1. Ripple/Noise measured with 20MHz bandwith. 2. Tested by minimal Vin and constant resistive load. 3. Measured Input reflected ripple current with a simulated source inductance of 12 µH. 4. Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5. Operation under no-load conditions will not damage these devices, however, they may not meet all listed specifications. DC/DC-Converter RS2/RD2-E10/T10 1.0W Unregulated Dual Separate Output we energize electronics! an acal group company we energize electronics!
RSG Electronic Components GmbH •Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 •rsg-electronic.de page 3 (3) STAND Juni 2016 Rev 01 MECHANICAL SPECIFICA TIONS Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 19.5 (0.76) 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 15.24 (0.60) 3.00 (0.12) 6.00 (0.24) 10.0 (0.39) Printed Face 1 2 4 5 6 7 0.50 (0.02) 0.25 (0.01) 0.50 (0.02) 1.25 (0.05) DC-DC CONVERTER RD2-XXXXXXX RSG XXXX
7 Pin SIL Package
20.32 (0.80) 15.24 (0.60) 0.50 (0.02) 11 9 10 6.88 (0.27)
14 Pin DIL Package
- The thickness of 48V input voltage model i s 7.20(0.28) The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output +V1 Output V2 Output +V2 Output The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output N.C V2 Output +V2 Output +V1 Output Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) MECHANICAL SPECIFICA TIONS Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 19.5 (0.76) 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 15.24 (0.60) 3.00 (0.12) 6.00 (0.24) 10.0 (0.39) Printed Face 1 2 4 5 6 7 0.50 (0.02) 0.25 (0.01) 0.50 (0.02) 1.25 (0.05) DC-DC CONVERTER RD2-XXXXXXX RSG XXXX
20.32 (0.80) 15.24 (0.60) 0.50 (0.02) 11 9 10 6.88 (0.27)
- The thickness of 48V input voltage model i s 7.20(0.28) The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output +V1 Output V2 Output +V2 Output The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output N.C V2 Output +V2 Output +V1 Output Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) MECHANICAL SPECIFICA TIONS Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 19.5 (0.76) 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 15.24 (0.60) 3.00 (0.12) 6.00 (0.24) 10.0 (0.39) Printed Face 1 2 4 5 6 7 0.50 (0.02) 0.25 (0.01) 0.50 (0.02) 1.25 (0.05) DC-DC CONVERTER RD2-XXXXXXX RSG XXXX
20.32 (0.80) 15.24 (0.60) 0.50 (0.02) 11 9 10 6.88 (0.27)
- The thickness of 48V input voltage model i s 7.20(0.28) The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output +V1 Output V2 Output +V2 Output The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output N.C V2 Output +V2 Output +V1 Output Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) MECHANICAL SPECIFICA TIONS Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 19.5 (0.76) 9.50 (0.37) 0.50 (0.02) 2.54 (0.10) 15.24 (0.60) 3.00 (0.12) 6.00 (0.24) 10.0 (0.39) Printed Face 1 2 4 5 6 7 0.50 (0.02) 0.25 (0.01) 0.50 (0.02) 1.25 (0.05) DC-DC CONVERTER RD2-XXXXXXX RSG XXXX
20.32 (0.80) 15.24 (0.60) 0.50 (0.02) 11 9 10 6.88 (0.27)
- The thickness of 48V input voltage model i s 7.20(0.28) The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output +V1 Output V2 Output +V2 Output The Pin Connection of high isolation one is the same with normal one. PIN CONNECTIONS PIN NUMBER Dual Separate V Input +V Input V1 Output N.C V2 Output +V2 Output +V1 Output Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) Notes: 1. Packing information please refer to „Product Packing Information“. Packing bag number: 58210023; 2. If the product is operated out of the min. load requirement, the product performance may not meet all parameter indexes in this datasheet; 3. The max. capacitive load offered is tested at nominal input voltage and full load; 4. Unless otherwise specified,parameter indexes in this datasheet is measured under the conditions of Ta=25°C, humidity<75% with nominal input voltage and rated output load; 5. All testing methods in this datasheet are based on our Company’s corporate standards; 6. The parameter indexes above are for the modules listed in this datasheet, for non-standard module‘s parameter indexes, please contact our technicians for specific information; 7. We can provide custom design; 8. Specifications are subject to change without prior notice. DC/DC-Converter RS2/RD2-E10/T10 1.0W Unregulated Dual Separate Output we energize electronics! an acal group company we energize electronics! MECHANICAL SPECIFICATIONS SIL 7 DIL 14 The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28