RS1AF DGNJDZ | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

1.0 AMP FAST RECOVERY RECTIFIERS

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating 25 C ambient temperature uniess otherwies specified. Single phase half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. TYPE NUMBER Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current, 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A Maximum DC Reverse Current Ta=25 C at Rated DC Blocking Voltage T a=100 C Maximum Reverse Recovery Time (Note 1) Typical Junction Capacitance (Note 2) Operating and Storage Temperature Range Tj, TSTG RS1AF RS1BF RS1DF RS1GF RS1JF RS1KF RS1MF UNITS 50 100 200 400 600 800 1000 V 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 1.0 5.0 100 -65 +150 V A A V uA uA nS pF C NOTES: 1. Reverse Recovery Time test condition: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1MHz and applied reverse voltage of 4.0V D.C. RS1AF THRU RS1MF 1.3 250 500 150 VOLTAGE RANGE 50 to 1000 Volts CURRENT

1.0 Ampere

Dimensions in inches and (millimeters)

FEATURES

  • Ideal for surface mount applications * Easy pick and place * Built-in strain relief * High surge current capability * Case: Molded plastic * Epoxy: UL 94V-0 rate flame retardant * Terminals: Solder plated, solderable per MIL-STD-202F, method 208 guranteed * Polarity: Color band denotes cathode end * Mounting position: Any Weight: 0.063 gram* * Both normal and Pb free product are available: * Normal:80~95%Sn,5~20%Pb * Pb free:99 Sn above can meet Rohs enviroment substance directive request SMAF Cathode Band Top View 0.128(3.25) 0.144(3.65) 0.189(4.80) 0.173(4.40) 0.110(2.80) 0.059(1.50) 0.055(1.40) 0.006(0.15) 0.047(1.20) 0.028(0.70)

0.1 1.0 .01 RATING AND CHARACTERISTIC CURVES (RS1AF THRU RS1MF) FIG.1-TYPICAL FORWARD CHARACTERISTICS FIG.2-TYPICAL FORWARD CURRENT DERA TING CURVE AVERAGE FORWARD CURRENT,(A) FIG.5-TYPICAL JUNCTION CAPACIT ANCE REVERSE VOLTAGE,(V) JUNCTION CAPACITANCE,(pF) INSTANTANEOUS FORWARD CURRENT,(A) FORWARD VOLT AGE,(V) Pulse Width 300us 1% Duty Cycle 0.2 0.4 0.6 0.8 1.0 1.2 0 20 40 60 80 100 120 140 160 180 200 (+) (+) 25Vdc (approx.) ( ) ( ) PULSE GENERATOR (NOTE 2) OSCILLISCOPE (NOTE 1) NON- INDUCTIVE W NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. +0.5A -0.25A -1.0A 1cm SET TIME BASE FOR 50 / 10ns / cm trr .01 .05 .1 .5 1 5 10 50 100 D.U.T. 3.0 Single Phase Half Wave 60Hz Resistive Or Inductive Load AMBIENT TEMPERATURE ( C) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS NONINDUCTIVE NONINDUCTIVE W W Tj=25 C FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) NUMBER OF CYCLES AT 60Hz 1 10 5 50 100 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method