RS1A YEASHIN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER VOLTAGE RANGE - 50 to 1000 Volts CURRENT - 1.0 Ampere

FEATURES

  • ldeal for surface mounted applications
  • Low leakage current
  • Glass passivated junction
  • High temperature soldering : 260°C /10 seconds at terminals Pb free product at available : 99% Sn above meet RoHS environment• substance directive request. MECHANICAL DATA
  • Case: Molded plastic
  • Epoxy: UL 94V-0 rate flame retardant
  • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026
  • Polarity: As marked
  • Mounting position: Any MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL RS1A RS1B RS1D RS1G RS1J RS1K RS1M UNITS Maximum Recurrent Peak Reverse Voltage V RRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage V RMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage V DC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Current at TA = 55 I O

1.0 Amps

Peak Forward Surge Current 8.3 ms single half sine- wave superimposed on rated load (JEDEC Method) I FSM

30 Amps

Maximum Forward Voltage at 1.0A DC V F 1.3 s t l o V @TA = 25 5.0 Maximum DC Reverse Current at Rated DC Blocki ng Voltage @TA = 125 I R 150 uAmps Maximum Reverse Recovery Time (Note 3) t rr 150 250 500 nSec Maximum Thermal Resistance (Note 2) 30 / W Typical Junction Capaci tance (Note 1) C J 15 pF Operati ng and Storage Temperature Range T J , T STG -55 to +150 SMA/DO-214AC Unit:inch(mm) .062(1.60) .047(1.20) .012(.305) .006(.152) .008(.203) .002(.051) .060(1.52) .030(0.76) .181(4.60) .157(4.00) .208(5.28) .188(4.80) .114(2.90) .098(2.50) .096(2.44) .078(2.00) DATA SHEET RS1A THRU RS1M SEMICONDUCTOR NOTES : 1. Measured at 1.0 MHz and applied reverse voltage of 4.0VDC 2. Thermal Resistance (Junction to Ambient), .24in (6.0mm ) 2 copper pads to each terminal. 3. Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A http://www.yeashin.com 1 REV.03 20150105 RθJA

RATING AND CHARACTERISTIC CURVES RS1A THRU RS1M http://www.yeashin.com 2 REV.03 20150105