RS010200R0FB12 VISHAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 3
Technical content
RS, NS www.vishay.com Vishay Dale Revision: 23-May-13 1 Document Number: 30204 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Wirewound Resistors, Industrial, Precision Power, Silicone Coated, Axial Lead Note * This datasheet provides information about parts that are RoHS-compliant and/or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information/tables in this datasheet for details.
FEATURES
- High temperature coating (> 350 °C)
- Complete welded construction
- Meets applicable requirements of MIL-PRF-26
- Available in non-inductive styles (type NS) with Ayrton-Perry windin g for lowest reactive components
- Excellent stability in operation (typical resistance shift < 0.5 %)
- MIL-PRF-26 qualified, type RW resistors can be found at: www.vishay.com/doc?30281
- Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Notes
- Shaded area indicates most popular models (1) Vishay Dale RS models have two power ratings depending on op eration temperature and stability re quirements. Models not available for characteristic V are: RS1/4, RS1/2, RS01A, RS01A…300, RS01M, RS02M, RS02B…300, RS005…69, and RS010…38 Available Available Available Available STANDARD ELECTRICAL SPECIFICATIONS GLOBAL MODEL HIST. MODEL POWER RATING (1) P25 °C W U ± 0.05 % to ± 5 % POWER RATING (1) P25 °C W V ± 3 % to ± 10 % RESISTANCE RANGE RESISTANCE RANGE RESISTANCE RANGE RESISTANCE RANGE RESISTANCE RANGE WEIGHT (typical) ± 1 % ± 3 %, ± 5 %, ± 10 % RS02C...17 RS007 RS-7 7.0 9.0 GLOBAL PART NUMBER INFORMATION Global Part Numbering example: RS02C10K00FS7017 GLOBAL MODEL (5 digits) RESISTANCE VALUE (5 digits) TOLERANCE CODE (1 digit) PACKAGING (3 digits) SPECIAL (up to 3 digits) (See Standard Electrical Specifications Global Model column for options) R = Decimal K = Thousand 15R00 = 15 10K00 = 10 k A = 0.05 % B = 0.1 % C = 0.25 % D = 0.5 % F = 1.0 % H = 3.0 % J = 5.0 % K = 10.0 % E70 = Lead (Pb)-free, tape/reel (smaller than RS005) E73 = Lead (Pb)-free, tape/reel (RS005 and larger) E12 = Lead (Pb)-free, bulk (Dash Number) From 1 to 999 as applicable S70 = Tin/lead, tape/reel (smaller than RS005) S73 = Tin/lead, tape/reel (RS005 and larger) B12 = Tin/lead, bulk Historical Part Numbering example: RS-2C-17 10 k 1 % S70 RS-2C-17 10 k 1 % S70 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING S02C10K00R FS701 7
RS, NS www.vishay.com Vishay Dale Revision: 23-May-13 2 Document Number: 30204 For technical questions, contact: ww2aresistors@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in inches [millimeters] Note (1) On some standard reel pack methods, the leads may be trimmed to a shorter length than shown MATERIAL SPECIFICATIONS Element: Copper-nickel alloy or nickel-chrome alloy, depending on resistance value Core: Ceramic, steatite or alum ina, depending on physical size Coating: Special high temperature silicone Standard Terminals: 100 % Sn, or 60/40 Sn/Pb coated Copperweld End Caps: Stainless steel Part Marking: DALE, model, wattage (2), value, tolerance, date code Note (2) Wattage marked on part will be “U” characteristic DERATING Note (3) B (max.) dimension is clean lead to clean lead NS NON-INDUCTIVE Models of equivalent physical and electrical specifications are available with non-inductive (Ayrton-Perry) winding. They are identified by substituting the letter N for R in the model number (NS005, for example). Two conditions apply: 1. For NS models, divide maximum resistance values by two 2. Body O.D. on NS02C may exceed that of the RS02C by 0.010" C D A 1.50 [38.10] (1) min. B - 65 - 50 0 50 150 250 350 AMBIENT TEMPERATURE IN °C 120 100 % N I R E W O P D E T A R CHAR. V CHAR. U GLOBAL MODEL DIMENSIONS in inches [millimeters] A B (3) (max.) CD RS1/4 0.250 ± 0.031 [6.35 ± 0.787] 0.281 [7.14] 0.085 ± 0.020 [2.16 ± 0.508] 0.020 ± 0.002 [0.508 ± 0.051] RS1/2 0.312 ± 0.016 [7.92 ± 0.406] 0.328 [8.33] 0.078 + 0.016 - 0.031 0.020 ± 0.002 [0.508 ± 0.051] RS01A RS01A...300 0.406 ± 0.031 [10.31 ± 0.787] 0.437 [11.10] 0.094 ± 0.031 [2.39 ± 0.787] 0.020 ± 0.002 [0.508 ± 0.051] RS01M 0.285 ± 0.025 [7.24 ± 0.635] 0.311 [7.90] 0.110 ± 0.015 [2.79 ± 0.381] 0.020 ± 0.002 [0.508 ± 0.051] RS002 0.625 ± 0.062 [15.88 ± 1.57] 0.765 [19.43] 0.250 ± 0.031 [6.35 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] RS02M 0.500 ± 0.062 [12.70 ± 1.57] 0.562 [14.27] 0.185 ± 0.015 [4.70 ± 0.381] 0.032 ± 0.002 [0.813 ± 0.051] RS02B RS02B...300 0.560 ± 0.062 [14.22 ± 1.57] 0.622 [15.80] 0.187 ± 0.031 [4.75 ± 0.787] 0.032 ± 0.002 [0.813 ± 0.051] RS02C 0.500 ± 0.062 [12.70 ± 1.57] 0.593 [15.06] 0.218 ± 0.031 [5.54 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] RS02C...17 RS02C...23 0.500 ± 0.062 [12.70 ± 1.57] 0.593 [15.06] 0.218 ± 0.031 [5.54 ± 0.787] 0.032 ± 0.002 [0.813 ± 0.051] RS005 RS005...69 RS005...70 0.875 ± 0.062 [22.23 ± 1.57] 1.0 [25.4] 0.312 ± 0.031 [7.92 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] RS007 1.22 ± 0.062 [30.99 ± 1.57] 1.28 [32.51] 0.312 ± 0.031 [7.92 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] RS010 RS010...39 1.78 ± 0.062 [45.21 ± 1.57] 1.87 [47.50] 0.375 ± 0.031 [9.53 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] [45.21 ± 1.57] 1.84 [46.74] 0.375 ± 0.031 [9.53 ± 0.787] 0.040 ± 0.002 [1.02 ± 0.051] TECHNICAL SPECIFICATIONS PARAMETER UNIT RS RESISTOR CHARACTERISTICS Temperature Coefficient ppm/°C ± 20 for 10 and above, ± 50 for 1 to 9.9 , ± 90 for 0.5 to 0.99 Maximum Working Voltage V ( P x R) Insulation Resistance 1000 M minimum dry, 100 M minimum after moisture test Operating Temperature Range °C Cha racterisitic U = - 65 to + 250, characteristic V = - 65 to + 350 PERFORMANCE TEST CONDITIONS OF TEST TEST LIMITS CHARACTERISTIC U CHARACTERISTIC V Thermal Shock Rated power applied until thermally stable, then a minimum of 15 min at - 55 °C ± (0.2 % + 0.05 ) R ± (2.0 % + 0.05 ) R Dielectric Withstanding Low Temperature Storage - 65 °C for 24 h ± (0.2 % + 0.05 ) R ± (2.0 % + 0.05 ) R High Temperature Exposure 250 h at: U = + 250 °C, V = + 350 °C ± (0.5 % + 0.05 ) R ± (2.0 % + 0.05 ) R Moisture Resistance MIL-STD-202 Method 106, 7b not applicable ± (0.2 % + 0.05 ) R ± (2.0 % + 0.05 ) R Shock, Specified Pulse MIL-STD-202 Method 213, 100 g’s for 6 ms, 10 shocks ± (0.1 % + 0.05 ) R ± (0.2 % + 0.05 ) R Vibration, High Frequency Frequency varied 10 Hz to 2000 Hz, 20 g peak, 2 directions 6 h each ± (0.1 % + 0.05 ) R ± (0.2 % + 0.05 ) R Terminal Strength Pull test 5 s to 10 s, 5 lb (RS1/4 thru RS01A), 10 lb for all others; torsion test - 3 alternating directions, 360° each ± (0.1 % + 0.05 ) R ± (1.0 % + 0.05 ) R
www.vishay.com Vishay Revision: 02-Oct-12 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain type s of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. Parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. All operating parameters, including typical pa rameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vish ay’s terms and condit ions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicate d in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vi shay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certi fies that all its products that are id entified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The Euro pean Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We co nfirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards.