RRB-0503S03A5 RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RRB-S03 3.5W Regulated Single Output

  • 24 Pin DIL Package
  • Highest Reinforced Isolation
  • 5000VAC Isolation
  • Minimum internal creepage and clearance distance >8mm
  • Short Circuit Protection
  • ±20% Input Voltage Range
  • Efficiency up to 80%
  • Operating Temperature Range -40° ~ +85°C
  • DIP 24 Plastic Case OUTPUT SPECIFICATION Voltage accuracy: ±2% Line regulation: Single ±0.2% max. LOAD REGULATION: from 10% to 100% Load: ±0.5% max. Short Circuit Protection : Continuos (Automatic Recovery ) Ripple noise (20Mhz bandwidth): 85mV pk-pk max. Temperature coefficient: ±0.02%/°C Capacitor load: See table Transient Recovery Time: 250us,typ. INPUT SPECIFICATIONS Voltage Range: ±20% max. Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: PI Type Input Reflected Ripple Current : 35mA pk-pk typ. OFF idle current: See table GENERAL SPECIFICATIONS Efficiency: See table I/O Isolation Voltage (60sec): 5000VAC I/O Isolation Capacitance: 50pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: 570kHz typ. Humidity: 95% rel H Reliability Calculated MTBF : > 1.00MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 100°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Non-conductive Black Plastic (UL94V-0 rated) PCB Creepage & Clearance Distance 8mm min. PIN Material: 0.5mm Brass Solder coated Weight Case- Sip: 12.5g Potting Material: Epoxy (UL94V-0 rated) Dimmension DIP: 1.25“ x 0.8“ x 0.4“ ABSOLUTE MAXIMUM RATINGS (1) Soldering Temperature: 260°C max. EMC SPECIFICATIONS (2) Radiated-/Conducted Emissions: EN55022 Class A see EMI Filter ESD: IEC 61000-4-2 Perf.Criteria A RS: IEC 61000-4-3 Perf.Criteria A EFT: IEC 61000-4-4 Perf.Criteria A SURGE: IEC 61000-4-5 Perf.Criteria A CS: IEC 61000-4-6 Perf.Criteria A PFMF IEC 61000-4-8 Perf.Criteria A DC/DC-Converter 3.5W Regulated Single Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 1 (3) STAND Juni 2016 Rev 01

31.75 Printed Face

10.16 (0.40) 3.00 (0.12) 2.54 (0.10) 20.32 (0.80) 0.50 (0.02) 2 3 11 Bottom View 15.24 (0.60) 23 22 16 14

24 Pin DIL Package

Notes : All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 0.50 (0.02) 5.08 (0.20) OUTPUTPOWER De ratin g Curve 100% 75% 50% 25% -40 -20 0 20 40 60 80 85 100 120 AMBIENT TEMPERATURE(° C) MODEL SELECTION GUIDE MODEL NUMBER INPUT Voltage Range (Vdc) INPUT Current OUTPUT Voltage (Vdc) OUTPUT Current OUTPUT Ripple & noise (mV) EFFICIENCY @ FL (% , typ.) Capacitor Load @LF (µF ,max.) No-Load (mA) Full Load (mA) Full load (mA) RRB-0503S03A5 5 70 633 3. 3 700 75 73 470 RRB-0505S03A5 5 85 909 5 700 75 77 470 RRB-0512S03A5 5 95 884 12 291 85 79 220 RRB-0515S03A5 5 115 896 15 233 75 78 220 RRB-1203S03A5 12 30 257 3. 3 700 75 75 470 RRB-1205S03A5 12 35 369 5 700 75 79 470 RRB-1212S03A5 12 50 364 12 291 85 80 220 RRB-1215S03A5 12 60 364 15 233 75 80 220 (1.25) 80) DC-DC CONVERTER RRB-XXXXXXXX RSG XXXX PIN CONNECTIONS PIN NUMBER DESCRIPTION 2 - V Input 3 - V Input 11 N.C. 14 +V Output 16 - V Output 22 +V Input 23 +V Input S.O.A. DC/DC-Converter RRB-S03 6.0W Regulated Single & Dual Output DC/DC-Converter 3.5W Regulated Single Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 2 (3) STAND Juni 2016 Rev 01 RRB - XX XX S XX Power (W) Input Type A X Code internal Isolation (kVAC)

6.0W Regulated Single & Dual Output DC/DC-Converter 3.5W Regulated Single Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 3 (3) STAND Juni 2016 Rev 01 VHD - 3.5W Regulated Single output Input Reflected Ripple Current Test Step Output Ripple & Noise Measurement Test Input reflected ripple current is measured through a source inductor Lin(12uH) and a source capacitor Cin(47uF, ESR<1.0© at 100KHz) at nominal input and full load. Use a capacitor Cout(1.0uF) measurement. The Scope measurement bandwidth is 0-20MHz. Copper Strip Lin Current +Vin +Vout +Vout Probe Cin DC/DC Converter Load DC/DC Converter 1uF Cout Scope Resistive Load -Vin -Vout -Vout Output Ripple & Noise Reduction To reduce ripple and noise, it is recommended to use a 1uF ceramic disk capacitor and a 10uF electrolytic capacitor to at the output. + 10uF +Vin +Vout 10uF 1uF DC Power Source Cin DC/DC Converter Cout Load - -Vin -Vout EMI Filter Input filter components (C1,C2,C3, L1) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. +Vin +Vout C1 + DC/DC Converter Load -Vin - Vout C1 L1 C2 & C3 47uF, 25V 12uH 150PF/250VAC C2 & C3 : Y5P Safety Standard Recognized Ceramic Capacitors foot distance 10mm The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28