RRA-11003D08A3

RRA-2403S08A3 RSG | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RRA-S08/D08 8.0W Ultra Wide Input Regulated Single & Dual

• 24 Pin DIL Package
• Ultra Wide Input Range
• 3000VDC Isolation
• EN50155 approval for railway applications
• Continuous Short Circuit Protection
• Over Voltage Protection
• Over Load Protection
• Efficiency up to 86%
• Operating Temperature Range -40° ~ +85°C
• Metal Case
• Under Voltage lock-out circuit
• JRemote on/off Control OUTPUT SPECIFICATION Voltage accuracy: ±1% Line regulation: Single &Dual ±0.5% max. LOAD REGULATION: from 0% to 100% Load: ±0.5% max. Cross Regulation (Dual Output): ± 5% Over Voltage Protection (Zener diode clamp): Zener Diode Clamp Over Current Protection: 160%of Fl, typ.. Short Circuit Protection : Indefinite (Automatic Recovery) Ripple noise (20Mhz bandwidth): 75mV pk-pk max. Temperature coefficient: ±0.02%/°C Capacitor load: See table Transient Recovery Time: 250us,typ. Transient Response: (Deviation) ±3-5% max. INPUT SPECIFICATIONS Voltage Range: See table Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: PI Type Input Reflected Ripple Current : 20mA pk-pk typ. Remote On/Off (positive logic): On: 3.0~12VDC or open circuit, OFF: 0~1.2VDC or Short circuit pin 1 and 2/3 OFF idle current: 5mA typ. OFF idle current: See table typ. GENERAL SPECIFICATIONS Efficiency: See table typ. I/O Isolation Voltage (60sec): 3000VDC I/O Isolation Voltage Metal Case: 1000VDC I/O Isolation Capacitance: 1000pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: 330kHz,220kHz typ. Humidity: 95% rel H Reliability Calculated MTBF : > 0.800MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC/EN 60950-1, EN50155 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 105°C Storage Temperature : -55°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Nickel-coated Copper Base Material: Non-conductive Black Plastic (UL94V-0 rated) PIN Material: 0.5mm Brass Solder coated Potting Material: Epoxy (UL94V-0 rated) Weight Case-DIP: 18.0g Dimmension DIP: 1.25“ x 0.8“ x 0.4“ ABSOLUTE MAXIMUM RATINGS (1) Input Surge Voltage (100ms)/ 24V Models: 100VDC max. Soldering Temperature: 260°C max. EMC SPECIFICATIONS (2) Radiated-/Conducted Emissions: EN50121-3-2 see note EMI Filter ESD: EN50121-3-2 Air ±8KV Perf.Criteria A RS: EN50121-3-2 20V/m Perf.Criteria A EFT: EN50121-3-2 2.0KV Perf.Criteria A SURGE: EN50121-3-2 2.0KV Perf.Criteria A CS: EN50121-3-2 10V Perf.Criteria A PFMF IEC 61000-4-8 10A/m Perf.Criteria A DC/DC-Converter 8.0W Ultra Wide Input Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 1 (4) STAND Juni 2016 Rev 01

6.0W Regulated Single & Dual Output DC/DC-Converter 8.0W Ultra Wide Input Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 2 (4) STAND Juni 2016 Rev 01 The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw MODEL SELECTION GUIDE 50% 25% 75% 100% OUTPUT POWER -40 -20 0 20 40 60 80 100 120 AMBIENT TEMPERATURE(° C) Derating Curve S.O.A. 70 85 1. One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 2. Measured with a 0.1uF ceramic capacitor and 10uF electrolytic capacitor. 3. Test by nominal input voltage and constant resistor load. 4. Tested by normal Vin and 25% load step change ( 75%-50%-25% of Io ) at 1A/ μs. 5. Measured Input reflected ripple current with a simulated source inductance of 12uH and a source capacitor Cin(33uF, ESR<1.0Ω at 100KHz). 6. The remote on/off control pin is referenced to -Vin(pin2, pin3). 7. Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 8. Input filter components are used to help meet conducted emissions 79dBuV from 0.15-0.5MHZ and 73dBuV from 0.5-30MHZ requirement for the module, 9. An external filter capacitor is required if the module has to meet EFT and Surge in EN50121-3-2. The filter capacitor RSG suggest: RRA-24XXX : one electrolytic capacitor ( Nippon - chemi - con KY series, 330μF/100V). RRA-110XXX : two electrolytic capacitors ( Ruby-con BXF series, 100μF/250V ) in parallel. 10. "Nature Convection" is usually about 30-65 LFM but is not equal to still air (0 LFM). Ripple/Noise Which application refer to the EMI Filter of design & feature configuration. INPUT OUTPUT MODEL NUMBER Voltage Range No-Load Full Load Voltage Min. load Full load EFFICIENCY Capacitor (Vdc) (mA) (mA) (Vdc) (mA) (mA) @FL(%) Load(uF) RRA-2405S08A3 13.0 ~ 70.0VDC or 24.0VDC 20 387.60 5 0 1600 86 1330 RRA-2412S08A3 13.0 ~ 70.0VDC or 24.0VDC 10 391.18 12 0 665 85 330 RRA-2415S08A3 13.0 ~ 70.0VDC or 24.0VDC 10 388.18 15 0 535 86 220 RRA-2405D08A3 13.0 ~ 70.0VDC or 24.0VDC 10 401.61 ±5 0 ±800 83 ±900 RRA-2412D08A3 13.0 ~ 70.0VDC or 24.0VDC 10 394.12 ±12 0 ±335 85 ±220 RRA-2415D08A3 13.0 ~ 70.0VDC or 24.0VDC 10 385.17 ±15 0 ±265 86 ±100 RRA-11005S08A3 42.0 ~ 176.0VDC or 110.0VDC 10 86.58 5 0 1600 84 1330 RRA-11012S08A3 42.0 ~ 176.0VDC or 110.0VDC 5 86.36 12 0 665 84 330 RRA-11015S08A3 42.0 ~ 176.0VDC or 110.0VDC 5 87.90 15 0 535 83 220 RRA-11005D08A3 42.0 ~ 176.0VDC or 110.0VDC 5 90.91 ±5 0 ±800 80 ±900 RRA-11012D08A3 42.0 ~ 176.0VDC or 110.0VDC 5 89.14 ±12 0 ±335 82 ±220 RRA-11015D08A3 42.0 ~ 176.0VDC or 110.0VDC 5 87.08 ±15 0 ±265 83 ±100 INPUT Current OUTPUT Current RRA - XX XX S/D XX Power (W) Input Type A X Code internal Isolation (kVDC)

6.0W Regulated Single & Dual Output DC/DC-Converter 8.0W Ultra Wide Input Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 3 (4) STAND Juni 2016 Rev 01 Input Reflected Ripple Current Test Step Input reflected ripple current is measured through a source inductor Lin(12uH) and a source capacitor Cin(33uF, ESR<1.0Ω at 100KHz) at nominal input and full load. Output Ripple & Noise Measurement Test Use a measurement. The Scope measurement bandwidth is 0-20MHz. 0.1uF ceramic capacitor and a 10uF electrolytic capacitor DC/DC Converter +Vout -Vout +Vin -Vin Load Lin Cin Current Probe The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw CTRL Module ON / OFF Positive logic turns on the module during high logic and off during low logic. Ctrl module on/off can be controlled by an external switch between the ctrl terminal and -Vin terminal. The switch can be an open collector or open drain For positive logic if the ctrl feature is not used, please leave the ctrl pin floating. +Vout -Vout +Vin -Vin LoadCTRL DC DC Converter Over Voltage Protection The module includes an internal output over voltage protection circuit, which monitors the voltage on the output terminals. If this voltage exceeds the over voltage set point, the module will activate the control loop of internal circuit to clamp the output voltage. Over Current Protection The module includes an internal over current protection circuit, which will endure current limiting for an unlimited duration during output over load condition. If the output current exceeds the OCP set point, the module will shut down automatically (hiccup). The module will try to restart after shut down. If the over load condition still exists, the module will shut down again. RW - 8W Ultra Wide Input Regulated Single & Dual output EMI Filter Input filter components (C1,C2,C3) are used to help meet conducted emissions requirement for the module. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiated noise. 79dBuV from 0.15-0.5MHZ and 73dBuV from 0.5-30MHZ DC/DC Converter +Vout -Vout +Vin -Vin Load C1、C2、C3 NoneRRA-24XXXX MLCC,1uF, 250VRRA-110XXX C2 C3 +Vout -Vout 10uF0.1uF Resistive LoadScope Copper Strip Single DC/DC Converter DESIGN & FEATURE CONFIGURATIONS

-V Input -V Input -V Input -V Input +V Output +V Output N.P. Common N.C. -V Output -V Output Common +V Input +V Input +V Input +V Input DUAL All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 4. Stand-off tolerance: ±0.1 ( ±0.004 )

24 Pin DIL Package

31.8 (1.25) 20.3 (0.80) 22.86 (0.90) 0.50 (0.02) 2.54 (0.10) 0.50 (0.02) 15.24 (0.60) 5.08 (0.20) 23 22 16 14 4.42 (0.17) 5.01 (0.19) DIA 1.0 (0.04) Printed Face 10.2 (0.4) 3.00 (0.12) 0.5 (0.02) DC-DC CONVERTER RRA-XXXXXXXX RSG XXXX

1 CTRL CTRL

RW - 8W Ultra Wide Input Regulated Single & Dual output RRA-2405S08 EFFICIENCY VS OUTPUT CURRENT 20% 40% 60% 80% 100% Full Load (%) Efficiency(%) Lo Line Nominal Hi Line RRA-11012S08 EFFICIENCY VS OUTPUT CURRENT 20% 40% 60% 80% 100% Full Load (%) Efficiency(%) Lo Line Nominal Hi Line Typical Operating Conditions NOTEELECTRICAL CHARACTERISTIC CURVES DC/DC-Converter RRA-S08/D08 6.0W Regulated Single & Dual Output DC/DC-Converter 8.0W Ultra Wide Input Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 4 (4) STAND Juni 2016 Rev 01 ELECTRICAL CHARACTERISTICS CURVES Typical Operating Conditions MECHANICAL SPECIFICATIONS The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28