RR8-4803D15A1

RR8-1203S15A1 RSG | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RR8-S15/D15 15.0W 2:1 Regulated Single & Dual Output

• 24 Pin DIL Package
• Wide 2:1 Input Range
• 1600VDC Isolation
• No Minimum Load Required
• Continuous Short Circuit Protection
• Over Voltage Protection
• Over Current Protection
• Efficiency up to 91%
• Operating Temperature Range -40° ~ +85°C
• Metal Case
• Soft Start
• Remote on/off Control OUTPUT SPECIFICATION Voltage accuracy: ±1.0% Line regulation: Single &Dual ±0.2-0.5% max. LOAD REGULATION: from 0% to 100% Load: ±0.5 - 1% max. Cross Regulation (Dual Output): ± 5% Over Voltage Protection (Zener diode clamp): Zener Diode Clamp Over Current Protection: 150%of Fl, typ.. Short Circuit Protection : Indefinite (Automatic Recovery) Ripple noise (20Mhz bandwidth): 60mV pk-pk Temperature coefficient: ±0.02%/°C Capacitor load: See table Transient Recovery Time: 250us,typ. Transient Response: (Deviation) ±3% max. INPUT SPECIFICATIONS Voltage Range: See table Start up Time: 20ms,typ. Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: PI Type Input Reflected Ripple Current : 20mA pk-pk typ. Remote On/Off (positive logic): On: 3.0~12VDC or open circuit, OFF: 0~1.2VDC or Short circuit pin 1 and 2/3 OFF idle current: 5mA typ. GENERAL SPECIFICATIONS Efficiency: See table typ. I/O Isolation Voltage (60sec): 1600VDC, Input/Output, Case/Input & Output I/O Isolation Capacitance: 2000pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: 250kHz-330kHz, typ. Humidity: 95% rel H Reliability Calculated MTBF : > 460KHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 105°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Nickel-coated Copper PIN Material: 0.5mm Brass Solder coated Potting Material: Epoxy (UL94V-0 rated) Weight Case-DIP: 20.0g Dimmension DIP: 1.25“ x 0.8“ x 0.4“ ABSOLUTE MAXIMUM RATINGS (1) Input Surge Voltage (100ms)/ 12V Models: 36VDC max. 24V Models: 50VDC max. 48V Models: 100VDC max. Soldering Temperature: 260°C max. EMC SPECIFICATIONS (2) Radiated-/Conducted Emissions: EN55022 Class A see EMI Filter ESD: IEC 61000-4-2 Perf.Criteria A RS: IEC 61000-4-3 Perf.Criteria A EFT: IEC 61000-4-4 Perf.Criteria B SURGE: IEC 61000-4-5 Perf.Criteria B CS: IEC 61000-4-6 Perf.Criteria A PFMF IEC 61000-4-8 Perf.Criteria A DC/DC-Converter 15.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 1 (3) STAND Juni 2016 Rev 01

6.0W Regulated Single & Dual Output DC/DC-Converter 15.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 2 (3) STAND Juni 2016 Rev 01 PART NUMBER STRUCTURE VU - 24 12 S 15 WattSeries Name Output Type S - Single output D - Dual Output Nominal Output Voltage 3R3 - 3.3V 5R1 - 5.1V 05 - 5V - (dual output only) 12 - 12V 15 - 15V Input Voltage Range 12 - 9 ~ 18V 24 - 18 ~ 36V 48 - 36 ~ 75V VU - 15W 2:1 Regulated Single & Dual output The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw MODEL SELECTION GUIDE 50% 25% 75% 100% OUTPUT POWER -40 -20 0 20 40 60 80 105 120 AMBIENT TEMPERATURE(° C) Derating Curve S.O.A. 1. One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 2. Measured with a 1.0uF ceramic capacitor. 3. Tested by minimal Vin and constant resistive load. 4. Tested by normal Vin and 25% load step change ( 75%-50%-25% of Io ). 5. Measured Input reflected ripple current with a simulated source inductance of 12uHand a source capacitor Cin(47uF, ESR<1.0Ω at 100KHz). 6. The remote on/off control pin is referenced to -Vin(pin2 and pin3). 7. An external filter capacitor is required if the module has to meet IEC61000-4-4 and IEC61000-4-5. The filter capacitor RSG suggest: Nippon chemi-con KY series, 2pcs 330uF/100V paraller connection or 680uF/100V. 8. Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 9. Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. INPUT OUTPUT EFFICIENCY Capacitor MODEL NUMBER Voltage Range No-Load Full Load Voltage Min. load Full load @FL Load @FL (Vdc) (mA, max.) (mA, typ.) (Vdc) (mA) (mA) (%, typ.) (μF, max.) RR8-1203S15A1 9-18 15 1309 3.3 0 4000 86 4700 RR8-1205S15A1 9-18 15 1465 5.1 0 3000 89 3300 RR8-1212S15A1 9-18 15 1436 12 0 1250 89 600 RR8-1215S15A1 9-18 15 1420 15 0 1000 90 400 RR8-1205D15A1 9-18 15 1488 ±5 0 ±1500 86 ±1500 RR8-1212D15A1 9-18 15 1420 ±12 0 ±625 90 ±288 RR8-1215D15A1 9-18 15 1420 ±15 0 ±500 90 ±200 RR8-2403S15A1 18-36 10 647 3.3 0 4000 87 4700 RR8-2405S15A1 18-36 10 732 5.1 0 3000 89 3300 RR8-2412S15A1 18-36 10 710 12 0 1250 90 600 RR8-2415S15A1 18-36 10 702 15 0 1000 91 400 RR8-2405D15A1 18-36 10 744 ±5 0 ±1500 86 ±1500 RR8-2412D15A1 18-36 10 710 ±12 0 ±625 90 ±288 RR8-2415D15A1 18-36 10 710 ±15 0 ±500 90 ±200 RR8-4803S15A1 36-75 5 327 3.3 0 4000 86 4700 RR8-4805S15A1 36-75 5 370 5.1 0 3000 88 3300 RR8-4812S15A1 36-75 5 359 12 0 1250 89 600 RR8-4815S15A1 36-75 5 359 15 0 1000 89 400 RR8-4805D15A1 36-75 5 372 ±5 0 ±1500 86 ±1500 RR8-4812D15A1 36-75 5 359 ±12 0 ±625 89 ±288 RR8-4815D15A1 36-75 5 355 ±15 0 ±500 90 ±200 OUTPUT CurrentINPUT Current PART NUMBER STRUCTURE VU - 24 12 S 15 WattSeries Name Output Type S - Single output D - Dual Output Nominal Output Voltage 3R3 - 3.3V 5R1 - 5.1V 05 - 5V - (dual output only) 12 - 12V 15 - 15V Input Voltage Range 12 - 9 ~ 18V 24 - 18 ~ 36V 48 - 36 ~ 75V VU - 15W 2:1 Regulated Single & Dual output The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw MODEL SELECTION GUIDE 50% 25% 75% 100% OUTPUT POWER -40 -20 0 20 40 60 80 105 120 AMBIENT TEMPERATURE(° C) Derating Curve S.O.A. 1. One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within ±5%. 2. Measured with a 1.0uF ceramic capacitor. 3. Tested by minimal Vin and constant resistive load. 4. Tested by normal Vin and 25% load step change ( 75%-50%-25% of Io ). 5. Measured Input reflected ripple current with a simulated source inductance of 12uHand a source capacitor Cin(47uF, ESR<1.0Ω at 100KHz). 6. The remote on/off control pin is referenced to -Vin(pin2 and pin3). 7. An external filter capacitor is required if the module has to meet IEC61000-4-4 and IEC61000-4-5. The filter capacitor RSG suggest: Nippon chemi-con KY series, 2pcs 330uF/100V paraller connection or 680uF/100V. 8. Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 9. Operation under no-load conditions will not damage these devices, however they may not meet all listed specifications. INPUT OUTPUT EFFICIENCY Capacitor MODEL NUMBER Voltage Range No-Load Full Load Voltage Min. load Full load @FL Load @FL (Vdc) (mA, max.) (mA, typ.) (Vdc) (mA) (mA) (%, typ.) (μF, max.) RR8-1203S15A1 9-18 15 1309 3.3 0 4000 86 4700 RR8-1205S15A1 9-18 15 1465 5.1 0 3000 89 3300 RR8-1212S15A1 9-18 15 1436 12 0 1250 89 600 RR8-1215S15A1 9-18 15 1420 15 0 1000 90 400 RR8-1205D15A1 9-18 15 1488 ±5 0 ±1500 86 ±1500 RR8-1212D15A1 9-18 15 1420 ±12 0 ±625 90 ±288 RR8-1215D15A1 9-18 15 1420 ±15 0 ±500 90 ±200 RR8-2403S15A1 18-36 10 647 3.3 0 4000 87 4700 RR8-2405S15A1 18-36 10 732 5.1 0 3000 89 3300 RR8-2412S15A1 18-36 10 710 12 0 1250 90 600 RR8-2415S15A1 18-36 10 702 15 0 1000 91 400 RR8-2405D15A1 18-36 10 744 ±5 0 ±1500 86 ±1500 RR8-2412D15A1 18-36 10 710 ±12 0 ±625 90 ±288 RR8-2415D15A1 18-36 10 710 ±15 0 ±500 90 ±200 RR8-4803S15A1 36-75 5 327 3.3 0 4000 86 4700 RR8-4805S15A1 36-75 5 370 5.1 0 3000 88 3300 RR8-4812S15A1 36-75 5 359 12 0 1250 89 600 RR8-4815S15A1 36-75 5 359 15 0 1000 89 400 RR8-4805D15A1 36-75 5 372 ±5 0 ±1500 86 ±1500 RR8-4812D15A1 36-75 5 359 ±12 0 ±625 89 ±288 RR8-4815D15A1 36-75 5 355 ±15 0 ±500 90 ±200 OUTPUT CurrentINPUT Current RR8 - XX XX S/D XX Power (W) Input Type A X Code internal Isolation (kVDC)

6.0W Regulated Single & Dual Output DC/DC-Converter 15.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 3 (3) STAND Juni 2016 Rev 01 VU - 15W 2:1 Regulated Single & Dual output Input Reflected Ripple Current Test Step Input reflected ripple current is measured through a source inductor Lin(12uH) and a source capacitor Cin(47uF, ESR<1.0Ω at 100KHz) at nominal input and full load. Output Ripple & Noise Measurement Test Use a capacitor Cout(1.0uF) measurement. The Scope measurement bandwidth is 0-20MHz. DC/DC Converter +Vout -Vout +Vin -Vin Load Lin Cin Current Probe +Vout -Vout Cout 1uF Resistive LoadScope Copper Strip Single DC/DC Converter TEST CONFIGURATIONS MECHANICAL SPECIFICATIONS PIN CONNECTIONS PIN NUMBER SINGLE -V Input -V Input -V Input -V Input +V Output +V Output N.P. Common N.C. -V Output -V Output Common +V Input +V Input +V Input +V Input DUAL Remote On/Off Remote On/Off Bottom View 31.8 (1.25) 20.3 (0.80) 22.86 (0.90) 0.50 (0.02) 2.54 (0.10) 0.50 (0.02) 15.24 (0.60) 5.08 (0.20) 23 22 16 14 2.0 (0.08) 4.42 (0.17) 5.01 (0.19) DIA 1.0 (0.04) All dimensions are typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 4. Stand-off tolerance: ±0.1 ( ±0.004 )

24 Pin DIL Package

Last Update : Dec.16.2015 Printed Face 10.2 (0.4) 3.00 (0.12) 0.5 (0.02) APPROVED:DRAWING: MOTIEN No. 9, Keji 2nd Rd., Tainan Technology Industrial Park, Tainan City 70955, Taiwan Tel: 886-6-384 2366 (Rep.) Fax: 886-6-384 2399 ISO 9001 . ISO 14001 . IECQ QC080000 RSG DC-DC CONVERTER RR8-2405D15 In: 18-36 Vdc Out: ± 5Vdc ±1500 mA TEST CONFIGURATIONS The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28