RR8-1202S12 RSG | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

1) These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. 2) (1.5mm from case 10sec Max.) 3) All specifications typical at TA= 25°C, nominal input voltage and full load unless otherwise specified. 4) The information and specification contained in this data sheet are believed to be correct at time of publication. However RSG accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. DC/DC-Converter RR8-S12/D12 12.0W 2:1 Regulated Single & Dual Output

  • 24 Pin DIL Package
  • Wide 2:1 Input Range
  • 1600VDC Isolation
  • No Minimum Load Required
  • Continuous Short Circuit Protection
  • Over Voltage Protection
  • Over Current Protection
  • Efficiency up to 91%
  • Operating Temperature Range -40° ~ +85°C
  • Metal Case
  • Soft Start
  • Remote on/off Control OUTPUT SPECIFICATION Voltage accuracy: ±1.2% Line regulation: Single &Dual ±0.5% max. LOAD REGULATION: from 0% to 100% Load: ±0.5 - 1% max. Cross Regulation (Dual Output): ± 5% Over Voltage Protection (Zener diode clamp): Zener Diode Clamp Over Current Protection: 150%of Fl, typ.. Short Circuit Protection : Indefinite (Automatic Recovery) Ripple noise (20Mhz bandwidth): 85mV pk-pk Temperature coefficient: ±0.02%/°C Capacitor load: See table Transient Recovery Time: 250us,typ. Transient Response: (Deviation) ±3% max. INPUT SPECIFICATIONS Voltage Range: See table Start up Time: 20ms,typ. Max. Input Current: See table No-Load/Full-Load Input Current: See table Input Filter: PI Type Input Reflected Ripple Current : 20mA pk-pk typ. Remote On/Off (positive logic): On: 3.0~12VDC or open circuit, OFF: 0~1.2VDC or Short circuit pin 1 and 2/3 OFF idle current: 5mA typ. GENERAL SPECIFICATIONS Efficiency: See table typ. I/O Isolation Voltage (60sec): 1600VDC, Input/Output, Case/Input & Output I/O Isolation Capacitance: 1200pF typ. I/O Isolation Resistance: 1000M Ohm Switching Frequency: 330kHz, typ. Humidity: 95% rel H Reliability Calculated MTBF : > 1.00MHrs (MIL-HDBK-217 f) Safety Standard: (designed to meet): IEC 60950-1 ENVIRONMENTAL SPECIFICATION Operating Temperature range: -40°C ~+85°C (see Derating Curve) Maximum Case Temperature: 100°C Storage Temperature : -40°C ~+125°C Cooling : Nature Convection PHYSICAL SPECIFICATIONS: Case Material: Nickel-coated Copper PIN Material: 0.5mm Brass Solder coated Potting Material: Epoxy (UL94V-0 rated) Weight Case-DIP: 18.0g Dimmension DIP: 1.25“ x 0.8“ x 0.4“ ABSOLUTE MAXIMUM RATINGS (1) Input Surge Voltage (100ms)/ 12V Models: 36VDC max. 24V Models: 50VDC max. 48V Models: 100VDC max. Soldering Temperature: 260°C max. EMC SPECIFICATIONS (2) Radiated-/Conducted Emissions: EN55022 Class A see EMI Filter ESD: IEC 61000-4-2 Perf.Criteria A RS: IEC 61000-4-3 Perf.Criteria A EFT: IEC 61000-4-4 Perf.Criteria A SURGE: IEC 61000-4-5 Perf.Criteria A CS: IEC 61000-4-6 Perf.Criteria A PFMF IEC 61000-4-8 Perf.Criteria A DC/DC-Converter 12.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 1 (4) STAND Juni 2016 Rev 01
  1. One load is 25% to 100% load, the other load is 100% load, the output voltage variable rate is within±5%. 2. Maximum value at nominal input voltage, Measured with 20MHz bandwidth and 1.0uF ceramiccapacitor. 3. Tested by minimal Vin and constant resistive load. 4. Tested by normal Vin and 25% load step change ( 75%-50%-25% of Io ). 5. Input filter components (C1, L) are used to help meet conducted emissions requirement for themodule. These components should be mounted as close as possible to the module; and all leads should be minimized to decrease radiatednoise. 6. An external filter capacitor is required if the module has to meet IEC61000-4-5. The filter capacitor RSG suggest: Nippon - chemi - con KY series,330uF/100V. 7. Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. +Vout +VinL DC/DC Converter Load -Vin -Vout Derating Curve 100% 75% 50% 25% -40 -20 0 20 40 60 80 85 100 120 AMBIENT TEMPERATURE(° C) RR8 - 12W 2:1 Regulated Single & Dual output MODEL SELECTION GUIDE MODEL NUMBER INPUT Voltage Range (Vdc) INPUT Current OUTPUT Voltage (Vdc) OUTPUT Current EFFICIENCY @FL(%) Capacitor Load(uF) No-Load (mA) Full Load (mA) Min. load (mA) Full load (mA) RR8-1202S12 9-18 15 889 2.5 0 3500 85 2000 RR8-1203S12 9-18 15 1146 3.3 0 3500 87 2000 RR8-1205S12 9-18 15 1163 5 0 2400 89 2000 RR8-1212S12 9-18 15 1149 12 0 1000 90 430 RR8-1215S12 9-18 15 1149 15 0 800 90 300 RR8-1212D12 9-18 15 1149 ±12 0 ±500 90 ±200 RR8-1215D12 9-18 15 1136 ±15 0 ±400 91 ±120 RR8-2402S12 18-36 15 445 2.5 0 3500 85 2000 RR8-2403S12 18-36 15 573 3.3 0 3500 87 2000 RR8-2405S12 18-36 15 581 5 0 2400 89 2000 RR8-2412S12 18-36 15 575 12 0 1000 90 430 RR8-2415S12 18-36 15 575 15 0 800 90 300 RR8-2412D12 18-36 15 575 ±12 0 ±500 90 ±200 RR8-2415D12 18-36 15 562 ±15 0 ±400 91 ±120 RR8-4802S12 36-75 15 225 2.5 0 3500 84 2000 RR8-4803S12 36-75 15 283 3.3 0 3500 88 2000 RR8-4805S12 36-75 15 291 5 0 2400 89 2000 RR8-4812S12 36-75 15 294 12 0 1000 88 430 RR8-4815S12 36-75 15 291 15 0 800 89 300 RR8-4812D12 36-75 15 294 ±12 0 ±500 88 ±200 RR8-4815D12 36-75 15 291 ±15 0 ±400 89 ±120 C1 L RR8- 12XXXXX 100uF, 100V 12uH RR8- 100uF, 100V 12uH RR8- 48XXXXX 100uF, 100V 12uH The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw S.O.A. VU - 24 12 S 12 Series Name Watt Input Voltage Range 12 - 9 ~ 18V 24 - 18 ~ 36V Output Type 48 - 36 ~ 75V S - Single output D - Dual Output Nominal Output Voltage 2R5 - 2.5V 3R3 - 3.3V 05 - 5V 12 - 12V 15 - 15V OUTPUTPOWER DC/DC-Converter RR8-S12/D12 6.0W Regulated Single & Dual Output DC/DC-Converter 12.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 2 (4) STAND Juni 2016 Rev 01 N O T E RR8 - XX XX S/D XX Power (W) Input Type A X Code internal Isolation (kVDC)

6.0W Regulated Single & Dual Output DC/DC-Converter 12.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 3 (4) STAND Juni 2016 Rev 01 VU - 12W 2:1 Regulated Single & Dual output Input Reflected Ripple Current Test Step Input reflected ripple current is measured through a source inductor Lin(12uH) and a source capacitor Cin(47uF, ESR<1.0© at 100KHz) at nominal input and full load. Output Ripple & Noise Measurement Test Use a capacitor Cout(1.0uF) measurement. The Scope measurement bandwidth is 0-20MHz. Resistive Load RR8 -1205S12 RR8 -2405S12 RR8 -4815S12 RR8 -2415D12 The models listed above is just for standard type. If you need the special specification product, please contact our service member by telephone presented in shortform cover or e-mail to : sales@motien.com.tw EFFIC IENCY VS OUTP UT CURRENT 100 Nominal Lo Line Hi Line 0% 20 % 40 % 60 % 80 % 100 % 120 % 140 % Load EFFICIENCY VS OUTPUT CURRENT 100 Lo Line Nominal Hi Line 0% 20 % 40 % 60 % 80 % 100 % 120 % 140 % Load EFFICIENCY VS OUTPUT CURRENT 100 Lo Line Nominal

80 Hi Line

0% 20 % 40 % 60 % 80 % 100 % 120 % 140 % Load EFFIC IENCY VS OUTP UT CURRENT 100 Lo Line Nominal Hi Line 0% 20 % 40 % 60 % 80 % 100 % 120 % 140 % Load +Vout +VinLin Current Probe Cin DC/DC Converter Load -Vin -Vout Copper Strip +Vout Single DC/DC Converter 1uF Cout Scope -Vout Efficiency(%) Efficiency(%) Efficiency(%)Efficiency(%) TEST CONFIGURATIONS

6.0W Regulated Single & Dual Output DC/DC-Converter 12.0W 2:1 Regulated Single & Dual Output we energize electronics! an acal group company we energize electronics! RSG Electronic Components GmbH • Sprendlinger Ldst. 115 • 63069 Offenbach •+49 69-984047-0 • Rsg-electronic.de page 4 (4) STAND Juni 2016 Rev 01 VU - 12W 2:1 Regulated Single & Dual output 31.8 (1.25) 2.0 (0.08) 22.86 (0.90) 1 2 3 9 11 DC-DC CONVERTER RR8-2405D12 In: 18~36Vdc Out: ±5Vdc ±1200mA RSG 0.50 (0.02) 20.3 (0.80) DIA 1.0 (0.04) Bottom View 15.24 (0.60)4.42 (0.17) XXXX 5.01 (0.19) 23 22 16 14 0.50 (0.02) Printed Face 2.54 (0.10) 5.08 (0.20) 0.5 (0.02) 10.2 (0.4) 3.00 (0.12) Nickel-Coated Copper All dimensionsare typical in millimeters ( inches ). 2. Pin pitch and length tolerance: ±0.35 ( ±0.014 ) 3. Case Tolerance: ±0.5 ( ±0.02 ) 4. Stand-off tolerance: ±0.1 ( ±0.004 )

24 Pin DIL Package

1 Remote On/Off Remote On/Off

9 N.P. Common 11 N.C. -V Output 14 +V Output +V Output 16 -V Output Common 22 +V Input +V Input 23 +V Input +V Input MOTIEN ISO 9001 . ISO 14001 . IECQ QC080000 No. 9, Keji 2nd Rd., Tainan Technology Industrial Park, Tainan City 70955, Taiwan Te l : 886- 6-384 2366 (Rep.) Fax: 886- 6-384 2399 DRAWIN APPROVED: Last Update : Aug.26.2014 MECHANICAL SPECIFICATIONS The models listed here are just standard type. If you need a product with special specification or you have questions regarding packing standards (Tube oder Tape/Reel) as well as application support, please contact our specialists: sales@rsg-electronic.de or +49 69-984047-41/-28