RR5-2403S05AX

DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

5.0 Watt 4:1 regulated

single & dual output ABSOLUTE MAXIMUM RATINGS (4) 1) Typical value at nominal input voltage and full load. 2) Tested by nominal Vin and constant resistive load. 3) Measured input reflected ripple current with a simulated source inductance of 12uH. 4) Exceeding the absolute ratings of the unit could cause damage. It is not allowed for continuous operating. 5) Operation under no-load conditions will not damage these devices. However they may not meet all listed specifications. 6) It´s necessary to add minimum capacitor in output for some single models. Please contact the service team for detail value. The models listed are just for standard type. If you need a special specification product, please contact our service. Phone: +49 69 984047-0, mail to: info@rsg-electronic.de or use the forms on www.rsg-electronic.de („Kontakt“). ■ DIP24, wide 4:1 input range ■ Full SMD technology ■ 1500 VDC isolation up to 3500 VDC isolation ■ Continuous short circuit protection ■ Efficiency up to 81% ■ -25°C~85°C operation temperature range ■ Optional metal case Voltage accuracy ± 1% Line regulation ± 0.5% Load regulation ± 0.5% Ripple & Noise (20 MHz bandwith) (1) 60 mV pk-pk Short circuit protection Continuous Temperature coefficient ± 0.02%/°C Capacitor load (2) See table Voltage range See table Max. input current See table No-load input current See table Input filter PI Type Input reflected ripple current (3) 35 mA pk-pk INPUT SPECIFICATIONS Efficiency See table, typ. I/O isolation voltage (3 sec.) Input/output 1500~3500 VDC Metal case / input & output 1000 VDC I/O isolation capacitance 60 pF typ. I/O isolation resistance 1000 M Ohm Switching frequency 100~400 kHz Humidity 95% rel. H Reliability calculated MTBF (MIL-HDBK-217F) > 2.199 Mhrs. Safety standard (designed to meet) IEC 60950-1:2001 GENERAL SPECIFICATIONS Case material Non-conductive black plastic (UL94V-0 rated) Nickel-coated copper Base material Non-conductive black plastic (UL94V-0 rated) Pin material Ø 0.5 mm brass solder-coated Potting material Epoxy (UL94V-0 rated) Weight Metal 15 g, plastic 12.5g Dimensions 1.25“ x 0.8“ x 0.4“ PHYSICAL SPECIFICATIONS Operating temperature (See derating curve) -25°C~ 85°C -25°C~ 71°C (For 100% load) Maximum case temperature 100°C Storage temperature -40°C~125°C Cooling Nature convection ENVIRONMENT SPECIFICATIONS NOTE These are stress ratings. Exposure of devices to any of these conditions may adversely affect long-term reliability. Input voltage (100 mS) 24 modes -0.7 ~ 40 VDC 48 modes -0.7 ~ 80 VDC Lead soldering temperature 260°C (1.5 mm from case 10 sec.) All specifications typical at Ta = 25°C, nominal input voltage and full load unless otherwise specified. The information and specifications contained in this data sheet are believed to be correct at time of publication. However, we accept no responsibility for consequences arising from printing errors or inaccuracies. Subject to change without notice. Page: 1/3 Last update: 18.02.09 RR-series, DIL 24 package, metal version, pic. similar

single & dual output DERATING CURVE Model Number Input Input current Output Output current Efficiency Capacitor Range No Load / Voltage Min. Load / @FL (%) Load ( HF) VDC Full Load (mA) VDC Full Load (mA) RR5-2403S05AX 9-36 20 / 236 3.3 300 / 1200 70 2200 RR5-2405S05AX 9-36 20 / 278 5 250 / 1000 75 1000 RR5-2412S05AX 9-36 20 / 258 12 105 / 416 81 470 RR5-2415S05AX 9-36 20 / 260 15 84 / 333 80 330 RR5-2405D05AX 9-36 20 / 278 ±5 ±125 / ±500 75 ±470 RR5-2412D05AX 9-36 20 / 260 ±12 ±53 / ±208 80 ±100 RR5-2415D05AX 9-36 20 / 263 ±15 ±42 / ±166 79 ±68 RR5-4803S05AX 18-72 15 / 121 3.3 300 / 1200 68 2200 RR5-4805S05AX 18-72 15 / 141 5 250 / 1000 74 1000 RR5-4812S05AX 18-72 15 / 136 12 105 / 416 77 470 RR5-4815S05AX 18-72 15 / 136 15 84 / 333 77 330 RR5-4805D05AX 18-72 15 / 145 ±5 ±125 / ±500 72 ±470 RR5-4812D05AX 18-72 15 / 138 ±12 ±53 / ±208 76 ±100 RR5-4815D05AX 18-72 15 / 138 ±15 ±42 / ±166 76 ±68 MODEL SELECTION GUIDE Page: 2/3 Last update: 18.02.09 NUMBER STRUCTURE Isolation 1=1.5 kVDC 3=3.5 kVDC Power 05=5W Output 03=3.3V 05=5V 12=12V 15=15V Code internal RR5 - XX XX S 05 A 1 (M-J/P/K)* Type S=Single D=Dual Input 24=9~36V 48=18~72V * Standard version in plastic case. Add suffix „ M“ for metal case! Please see Pinout-versions page 3 and add suffix „ J“, „P“ or „K“! Name/Package RR5=DIL24 MECHANICAL SPECIFICATIONS (J-Models) Notes: All dimensions are typical in millimeters (inches). 1) Pin diameter: 0.5 ± 0.05 (0.02 ± 0.002) 2) Pin pitch tolerance: ± 0.35 (± 0.014) 3) Case tolerance: ± 0.5 (± 0.02) The Pin connections for High Isolation „J“-Models are the same as for normal ones! MECHANICAL SPECIFICATIONS (J-Models) DIL 24 package Plastic case „M“- Metal case DIL 24 package Pin Number Dual +V Input +V Input Common Common N.C. -V Output +V Output -V Input -V Input Single +V Input +V Input N.C. N.C. -V Output +V Output N.C. -V Input -V Input PIN CONNECTIONS (J-Models) RSG■ RR5-XXXXX05AX(J) RSG■ RR5-XXXXX05AX(MJ)

Page: 3/3 Last update: 18.02.09 mail: info@rsg-electronic.de www.rsg-electronic.de RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach Tel. +49 69 984047-0 Fax +49 69 984047-77 RR5-S05/D05 single & dual output Pin Number Dual +V Input -V Output Common N.P . Common +V Output -V Input -V Input +V Output Common N.P . Common -V Output +V Input Single +V Input N.C. N.C. N.P. -V Output +V Output -V Input -V Input +V Output -V Output N.P N.C. N.C. +V Input PIN CONNECTIONS (P-Models) Pin Number Dual -V Input -V Input Common -V Output +V Output Common +V Input +V Input Single -V Input -V Input N.P . N.C. +V Output -V Output +V Input +V Input PIN CONNECTIONS (K-Models) Pin Number Dual N.P . -V Input -V Input Common N.P . -V Output N.P . N.P . +V Output N.P . Common +V Input +V Input N.P . Single N.P . -V Input -V Input N.C. N.P . N.C. N.P . N.P . +V Output N.P . -V Output +V Input +V Input N.P . PIN CONNECTIONS (P-Models High Isolation) MECHANICAL SPECIFICATIONS (P-Models) MECHANICAL SPECIFICATIONS (P-Models) DIL 24 package Plastic case „M“ - Metal case DIL 24 package Notes: All dimensions are typical in mm (inches). 1) Pin diameter: 0.5 ± 0.05 (0.02 ± 0.002) 2) Pin pitch tolerance: ± 0.35 (± 0.014) 3) Case tolerance: ± 0.5 (± 0.02) MECHANICAL SPECIFICATIONS (K-Models) MECHANICAL SPECIFICATIONS (K-Models) DIL 24 package Plastic case „M“ - Metal case DIL 24 package Notes: All dimensions are typical in mm (inches). 1) Pin diameter: 0.5 ± 0.05 (0.02 ± 0.002) 2) Pin pitch tolerance: ± 0.35 (± 0.014) 3) Case tolerance: ± 0.5 (± 0.02) The Pin connections for High Isolation „K“-Models are the same as for normal ones! RSG■ RR5-XXXXX05AX(P) RSG■ RR5-XXXXX05AX(MP) RSG■ RR5-XXXXX05AX(K) RSG■ RR5-XXXXX05AX(MK)